1 / 16

What do we want to do today?! Tuesday: 29-1-1440

What do we want to do today?! Tuesday: 29-1-1440. A bit of housekeeping Conclude chapter-7 (possibly) introduce chapter-8. Prof. Zain Yamani Office: 15-3100/ 3102; Phone : 860-4363; Mobile : 0504608515 E-Mail : zhyamani@kfupm.edu.sa ; HP: http://faculty.kfupm.edu.sa/phys/zhyamani.

dwiest
Download Presentation

What do we want to do today?! Tuesday: 29-1-1440

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. What do we want to do today?!Tuesday: 29-1-1440 • A bit of housekeeping • Conclude chapter-7 • (possibly) introduce chapter-8 Prof. Zain Yamani Office: 15-3100/ 3102; Phone: 860-4363; Mobile:0504608515 E-Mail: zhyamani@kfupm.edu.sa; HP: http://faculty.kfupm.edu.sa/phys/zhyamani

  2. A bit of housekeeping Attendance If you come late, please make me aware during the (end of) the same lecture.

  3. A bit of housekeeping • Mathematica is presumably available in: • Building 4/104 • Building 7/ 137 • Building 66/230 • Library

  4. A bit of housekeeping Raise your hand if you are committed to attending a Help Session tomorrow (Wednesday) at 5.45 – 7.00 p.m.

  5. Challenge: add friction!! A racing car speeds on a circular (radius: R) track that is banked at angle (q) with the horizontal. The car mass is (m) and the coefficient of static friction between car and track is m. Draw a schematic of the problem. Calculate the maximum speed that the car can run without skidding off. In what ways can this “maximum” speed be improved?

  6. Chapter-7: Energy • Kinetic Energy • Work • Work done by Weight (gravity) • Work done by Spring • Power

  7. What did we learn about last lecture?

  8. A rope exerts a force F on on a 20.0 kg crate in lifting it vertically upward above the floor. The crate starts from rest and accelerates upward at 5.00 m/s2. How much work was done by the force F in raising the crate 4.00 m above the floor? 101-2

  9. What if the work is done by a spring? The relaxed: non-stretched/ non-extended, non-compressed state. The spring force is a (linear) “restoring” force. Spring (or Force) constant: k F = - k d What does big “k” mean? SI units for “k”?

  10. Two balls are launched from the same spring-loaded cannon with the spring compressed the same distance each time. Ball A has a 40 kg mass and ball B has a 60 kg mass. What is the relation between their speeds at the instant of launch? 141-2

  11. Two balls are launched from the same spring-loaded cannon with the spring compressed the same distance each time. Ball A has a 40 kg mass and ball B has a 60 kg mass. What is the relation between their speeds at the instant of launch? 141-2

  12. Work done by a general variable force (omitted)

  13. Average and Instantaneous Power P, units of P Pavg Pinstanaeous The horsepower = 746 watt

  14. A constant tension force is used to pull a 50.0 kg box up a frictionless plane inclined at 30.0° relative to the horizontal. The tension force is parallel to the incline. The box is moved a distance of 30.0 m along the incline with a constant speed of 1.00 m/s. At what rate is work done by the tension force? 101-2

  15. A 0.50 kg object, moving along the x-axis, experiences the force shown in the Figure. The object’s velocity at x = 0.0 m is v = 2.0 m/s, and at x = 4.0 m is v = 8.0 m/s. What is Fmax? 101-2

More Related