Structural and Dielectric Properties of SrTiO3 and BST Thin Films via Pulsed Laser Deposition

Mar 22, 2012

240 likes | 798 Views

. . Introduction. Microwave passive components used in wireless communication: Material requirements for microwave dielectrics:1. High dielectric constant, er > 1002. Low loss tangent / High Quality Factor Q = (tan d)-1Q > 10,0003. Very low temperature coeff. of resonanceTCw = -(1/2 TCe aL) ~ few ppm/K High erMiniturizationLow loss and Stability(f, TC) Improved Performance.

Share Presentation

Embed Code

Link

dwayne

Download Presentation

Structural and Dielectric Properties of SrTiO3 and BST Thin Films via Pulsed Laser Deposition

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

Pulsed Laser Deposition (PLD)

Pulsed Laser Deposition (PLD). Anne Reilly College of William and Mary Department of Physics. Outline. 1. Thin film deposition 2. Pulsed Laser Deposition a) Compared to other growth techniques b) Experimental Setup c) Advantages and Disadvantages 3. Basic Theory of PLD

6.45k views • 32 slides

Hydroxyapatite Coatings by Pulsed Laser Deposition

Orthopedic and Dental Implants . Typically made of Titanium Alloys? Good corrosion and fatigue life? Acceptable biocompatibility Deposition of a coating of a material known as Hydroxyapatite on titanium implants? Improves bioactivity ? Improves biocompatibility Hydroxyapatite is an important component of human bone! .

820 views • 10 slides

Pulsed Laser Deposition Assisted Fabrication and Characterization of the Nanostructured Quantum Wells

Most Common Problems in the Synthesis of Nano Composites . Nanoparticles, large surface-area to volume ratio, tend to reduce their surface energy (>100 dyn/cm)Concurrent coarsening of grainsControl of composition and structureReproducibility and scale-up ability . Success in Synthesis and Fabrication of Metal-Ceramic Thin Film Nanocomposites .

609 views • 19 slides

Barium calcium titanate thin film optical detectors grown on a platinum substrate via pulsed laser deposition

Barium calcium titanate thin film optical detectors grown on a platinum substrate via pulsed laser deposition. Ms. Sarah Stahl T C SAM Student Symposium May 17, 2005. Barium. Oxygen. Titanium. Photoferroelectric Oxides. Unique properties caused by the large band gap (3-4 eV) Examples:

521 views • 16 slides

Atomic Layer Deposition of High-K Dielectric Films

585 views • 21 slides

Ferromagnetism in Transition metal doped ZnO thin films by Pulsed Laser Depostion

Objective of the projectOrigin of MagnetismZinc Oxide Introduction and ApplicantionsDilute Magnetic SemiconductorsMechanisms of DMSPulsed Laser Deposition Thin filmsLiteratures on Co, Ni, Mn doped ZnO thin filmsConclusion. Content. Objective and Goals. Understanding the principles behind

244 views • 23 slides

Silicon carbide thin films for EUV application deposited by means of Pulsed Laser Deposition (PLD)

Silicon carbide thin films for EUV application deposited by means of Pulsed Laser Deposition (PLD). Gianni Monaco LUXOR-IFN Laboratory COST meeting Krakow , May 2010 COST-STSM-MP0601-05393 Report gmonaco@dei.unipd.it. Outline. SiC Carbides in the EUV; PLD systems ;

602 views • 24 slides

Wetting Behavior of Cerium Oxide Films Grown by Pulsed Laser Deposition

Wetting Behavior of Cerium Oxide Films Grown by Pulsed Laser Deposition. Daniel Li, UIUC Advisor Dr. Jeremiah Abiade NSF-REU Symposium University of Illinois at Chicago Chicago, IL 8/1/2013. Daniel Li dli22@illinois.edu. Purpose and Motivation.

550 views • 29 slides

Chemical Nanoparticle Deposition of Oxide Nanostructured Thin Films

Drain. Source. 300 nm. Al. Al. 24 nm. Zinc Oxide. SiO 2. 100 nm . p+ Silicon (Gate). 675 m m . Au. 500 nm. Chemical Nanoparticle Deposition of Oxide Nanostructured Thin Films. Y.-J. Chang , Y.-W. Su , D.-H. Lee, C.-H. Chang

189 views • 1 slides

Pulsed laser deposition of oxide epitaxial thin films. Recent results on Sr 4 Fe 6 O 13

Pulsed laser deposition of oxide epitaxial thin films. Recent results on Sr 4 Fe 6 O 13. Dr. JOSÉ A. PARDO Department of Materials Science and Technology, & Aragón Institute of Nanoscience University of Zaragoza. Pulsed Laser Deposition (PLD). High-vacuum chamber. Substrate on

560 views • 24 slides

Ultrashort-pulse laser deposition of thin films

Ultrashort-pulse laser deposition of thin films. Y.-M. Chen a,c ( 陳彥穆 ), Y.-C. Tsou a,c ( 鄒昀晉 ), C.-Y. Yeh a,c ( 葉啟宇 ), C.-J. Chen a,b,c ( 陳俊嘉 ), C.-S. Wu a,b,c ( 吳強生 ), M.-J. Jiang a,c,d ( 江銘哲 ), H.-H. Chu c ( 朱旭新 ), J.-Y. Lin d ( 林俊元 ), J. Wang a,b,c ( 汪治平 ), and S.-Y. Chen a,c ( 陳賜原 ).

483 views • 14 slides

Fabrication and Properties of MSMA Thin Films

Mechanical Arm. Pressing Chamber. Mold containing template and thin film. Hydraulic Jack. Indium-Thallium (In-21at%Tl) Nanowires.

234 views • 1 slides

Study of MgB 2 Thin Films on Nb by Pulse Laser Deposition

Study of MgB 2 Thin Films on Nb by Pulse Laser Deposition. S.Mitsunobu, S.Inagaki, H.Nakanishi, M.Wake and M.Fukutomi* KEK,NIMR*. Scope of talk Introduction Forming method Mgb2 thin film PLD equipment Precursor annealing RF Measurement of the MgB2 thin film and Nb

449 views • 21 slides

TETRAHEDRAL AMORPHOUS CARBON FILMS: DEPOSITION METHODS, PROPERTIES AND APPLICATIONS

Koszalin University of Technology. Institute of Mechatronics , Nanotechnology and Vacuum Technique. TETRAHEDRAL AMORPHOUS CARBON FILMS: DEPOSITION METHODS, PROPERTIES AND APPLICATIONS Jan Walkowicz.

874 views • 39 slides

Deposition of thin films by sputtering method

Student Presentation of FYS-9310 Material Science of Semiconductor. Deposition of thin films by sputtering method. Feri Adriyanto. PhD student Microsystems and Nanotechnology Laboratory Department of Physics, University of Oslo. Outline. Introduction. Fundamental of sputtering.

1.29k views • 24 slides

Sputter deposition of Thin Films

Sputter deposition of Thin Films. Course Tutor Dr R E Hurley. Northern Ireland Semiconductor Research Centre School of Electrical & Electronic Engineering The Queen’s University of Belfast. Course content. Applications Definitions Advantages of sputtering Physical principles

1.72k views • 56 slides

Electrical and optical properties of thin films

Electrical and optical properties of thin films. sami.franssila@tkk.fi. Outline. Metallic films Thickness dependent resistivity Limit of Ohm’s law Metallization for flexible electronics Semiconducting films (Silicon microtechnology 2009 slides !) Dielectric films, electrical properties

3.59k views • 48 slides

Optical and structural properties of RF-sputtered Si x C 1-x thin films

PSCM. Optical and structural properties of RF-sputtered Si x C 1-x thin films. International Conference on Nano-Materials and Renewable Energies. Presented by : Abdelilah El Khalfi. EL KHALFI ,E. ECH-CHAMIKH ,Y. IJDIYAOU, M. AZIZAN,A. ESSAFTI

352 views • 16 slides

Carbon-based nanocomposite thin films – deposition , structure and properties

Carbon-Based Nanostructured Composite and Nanolaminated Films. Carbon-based nanocomposite thin films – deposition , structure and properties. W itold Gulbiński Institute of Mechatronics, Nanotechnology and Vacuum Technique Koszalin University of Technology, PL.

844 views • 44 slides

Stress control of thin films in Plasma deposition

Stress control of thin films in Plasma deposition. By: Liwei Wang Professor: Dr. Y. Tzeng For: ELEC 7730 Date: Nov 10, 2003. Questions. What is the microstructure formed during film growth cause the intrinsic tensile stress?

2.12k views • 25 slides

Morphological and Electrochemical Properties of LiMn2O4 Thin Films

LiMn2O4 were prepared by pulsed laser deposition technique. Two important deposition parameters such as substrate temperature and oxygen partial pressure during the thin film deposition were controlled. Systematic characterizations like RBS, SEM, TEM and electrochemical studies were performed on to the prepared samples. The SEM data demonstrated that the films exhibited a smooth surface roughness with spherical droplets. The grain size increased with the increase of substrate temperature. The electrochemical measurements were carried out on Li//LiMn2O4 cells with a lithium metal foil as anode and LiMn2O4 film as cathode of 1.5 cm2 active area. Cyclic voltammetry (CV) measurements have been carried out at sweep rate Î± = 1 mVs-1. Specific capacity of133 mC/cm2 Âµm was measured for the film grown at 700 oC.

94 views • 6 slides

Deposition Techniques for Thin Films and Sensing

Deposition Techniques for Thin Films and Sensing. Bohr Rutherford. Nano-materials. Carnot. Thin Film. Catalysis, Polymers. Bulk Fabrication. STM. SEM. Time (year). -100. Now. 100. -200. Historical Perspective of Material Synthesis. CVD & PVD thin film growth techniques.

1.41k views • 39 slides

More Related