1 / 23

A VPI-based IP Core Serial Fault Simulation and Test Generation Methodology

A VPI-based IP Core Serial Fault Simulation and Test Generation Methodology. Pedram A. Riahi† Zainalabedin Navabi† Naghmeh Karimi‡ Fabrizio Lombardi†. ECE Department, Northeastern University† ECE Department, University of Tehran‡ IEEE-NATW 2003. Introduction. System-on-Chip (SOC)

dreama
Download Presentation

A VPI-based IP Core Serial Fault Simulation and Test Generation Methodology

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. A VPI-based IP Core Serial Fault Simulation and Test Generation Methodology Pedram A. Riahi† Zainalabedin Navabi† Naghmeh Karimi‡ Fabrizio Lombardi† ECE Department, Northeastern University† ECE Department, University of Tehran‡ IEEE-NATW 2003

  2. Introduction • System-on-Chip (SOC) • SOC Testing • Present Solutions • Hardware Description Languages (HDLs) • SOC Testing using VPI • Results on ISCAS Benchmarks • Conclusion and Future Works IEEE-NATW 2003

  3. System-on-Chip (SOC) • Complex Functional Blocks • System-on-Board • Core: • μP/μC • DSP • Memory • Function-Specific • Logic Element • Communication Peripheral • Analog Device IEEE-NATW 2003

  4. System-on-Chip (SOC) • Reusable Cores • Core Types: • Soft (Synthesizable) • Firm • Hard • Intellectual Property (IP) • In-house cores IEEE-NATW 2003

  5. SOC Testing • Traditional Test Methods • Core-Level Testing • Design For Test (DFT) • Automatic Test Pattern Generation (ATPG) • Chip-Level Testing • Justifying Test Sequences • Propagating Test Response IEEE-NATW 2003

  6. Present Solutions • Core-Level Testing • System Chip’s Functional Test • Direct Access (I/O Muxing) • Local Boundary-Scan or Collar Register • Full-Scan / Built-in-Self-Test (BIST) • Proprietary Solution • Chip-Level Testing IEEE-NATW 2003

  7. Present Solutions • Full-Scan / Boundary-Scan (FScan-BScan) Full- or Partial-Isolating Rings / Control Points FScan-BScan IEEE-NATW 2003

  8. Present Solutions • Full-Scan / Test Bus (FScan-TBus) • Test Bus / Boundary-Scan Chain IEEE-NATW 2003

  9. Present Solutions • Binary Decision Diagram (BDD) • Partial Netlist / Partial Boundary Scan IEEE-NATW 2003

  10. Present Solutions • Core Transparency FPath HScan IEEE-NATW 2003

  11. Present Solutions • IEEE P1500 • BIST • Chip-Level Testing • Parallel Direct Access • Serial Scan Access • Functional Access IEEE-NATW 2003

  12. Hardware Description Languages (HDLs) • VHDL • Verilog • Procedural Interfaces: • VHPI • VPI • Cadence Verilog-XL • C Platform IEEE-NATW 2003

  13. SOC Testing with VPI • VPI-based Test Environment • VPI-based Fault Simulation • Single Stuck-at Fault • Serial • VPI-based Test Generation • Random Pattern IEEE-NATW 2003

  14. SOC Testing with VPI • Proposed VPI Task Arguments for Fault Simulation • SFS_faultlist • Node Type: reg, net • Node Name: ~.module_name/node_name • Stuck-at: sa0, sa1 • Not Injected • Injected but not Detected • Partially Detected • Detected • Status: 0, 1, Z, X • SFS_faultinjection, SFS_faultrelease • SFS_updatefaultlist[one, two, three] IEEE-NATW 2003

  15. SOC Testing with VPI • Proposed VPI Task Arguments for Test Generation • SFS_faultcoverage • SFS_morefault • SFS_decide • SFS_readstatus, SFS_restorestatus • SFS_randomvector • SFS_saveoutput, SFS_compareoutput • SFS_savevector, SFS_report IEEE-NATW 2003

  16. SOC Testing with VPI • Initialization doread := true; $SFS(faultlist); while !($SFS(faultcoverage, coverage) satisfied) { if (doread) $SFS(readstatus); $SFS(randomvector, depth); $readmem; for (all vectors) { Apply Vector; $SFS(savevector); } … Fault Injection and Simulation … Decide } $SFS(report); IEEE-NATW 2003

  17. SOC Testing with VPI • Fault Injection and Simulation Lindex := 0; while ($SFS(morefault)) { $SFS(restorestatus); $SFS(faultinjection); flag := true; for (all vectors and flag) { Apply Vector; if ($SFS(compareoutput) == detected) { $SFS(updatefaultlistone); flag := false; Lindex := Largest index; } $SFS(faultrelease); } IEEE-NATW 2003

  18. SOC Testing with VPI • Decide if ($SFS(decide, limit) == GOOD) { $SFS(savevector); $SFS(updatefaultlisttwo); if (Lindex > depth) { $SFS(restorestatus); for (all vectors that index < Lindex) Apply Vector; } doread := true; } else { $SFS(restorestatus); $SFS(updatefaultlistthree); doread := false; } IEEE-NATW 2003

  19. Results on ISCAS Benchmarks • PARWAN • HITEC • ISCAS85/89 Netlist Files • VPI • ISCAC85/89 Verilog Codes • Fault Collapsing • Fan-outs IEEE-NATW 2003

  20. Results on ISCAS Benchmarks IEEE-NATW 2003

  21. Results on ISCAS Benchmarks IEEE-NATW 2003

  22. Results on ISCAS Benchmarks IEEE-NATW 2003

  23. Conclusion and Future Works • A Test Methodology for SOC IP Core Fault Simulation and Test Generation • Serial Fault Simulation • Parallel or Deductive Fault Simulation • Mixed-Level Fault Simulation • Module-based • Process-based • Random Pattern Test Generation • Reaching Higher Performance using VPI Built-in Features IEEE-NATW 2003

More Related