1 / 19

Sterling Hydronic Unit Heaters

Sterling Hydronic Unit Heaters. Steam and Hot Water Horizontal and Vertical. Horizontal Unit– Standard (Header Type). Available in steam or hot water Casing constructed out of 20 gauge die-formed steel Standard with adjustable horizontal louvers Totally enclosed fan motor standard

draco
Download Presentation

Sterling Hydronic Unit Heaters

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Sterling Hydronic Unit Heaters Steam and Hot Water Horizontal and Vertical

  2. Horizontal Unit– Standard (Header Type) • Available in steam or hot water • Casing constructed out of 20 gauge die-formed steel • Standard with adjustable horizontal louvers • Totally enclosed fan motor standard • (19) Sizes 18-360 MBH • Coil connections on top and bottom of unit • ETLc Certified

  3. Horizontal Standard Coils • Cast bronze saddles braised to copper header • Copper tubing • Aluminum fins • Factory tested at 200 PSI • Max working pressure 150 PSI • Max steam temperature 366 ⁰F • Pipe connections have internal threads for ease of connection

  4. Horizontal Unit - Serpentine • Hot water only • Casing constructed out of 20 gauge die-formed steel • Standard with adjustable horizontal louvers • Totally enclosed fan motor standard • (4) Sizes 8-36 MBH. • Coil connections on side of unit • OSHA fan guard is standard • ETLc Certified

  5. Horizontal Serpentine Coils • Coil is serpentine design with 3/8” copper tubing. Tubing connections shall be 3/8” copper tubing, type “M” • Aluminum fins • Factory tested at 200 PSI • Max working pressure 150 PSI • Pipe connections have internal threads for ease of connection

  6. Vertical Louvers (Horizontal Units) • Vertical louvers are available as a field installed accessory • Allows for the adjustment of airflow for 4-way air control

  7. Vertical – Standard • Available in steam or hot water • Casing formed by two square steel plates • Totally enclosed fan motor standard • (15) Sizes 41-705 MBH • Coil connections on top and bottom of unit • ETLc Certified

  8. Vertical Unit Coil • Copper coil with aluminum fins mechanically bonded to the tubes • Coils are tested at 375 PSI • Max working steam pressure of 75 PSI or hot water up to 225 PSI or 325 ⁰F • Threaded steel pipe coil connections

  9. Vertical – Low Output • Field knock-outs • (15) Sizes 34-620 MBH • Reduced temperature rise

  10. Louvers (Vertical) • OSHA Fan Guards • Louver Cone Diffuser

  11. Motors • Explosion Proof • Totally Enclosed

  12. Steam Pressure and Water Control • Steam Pressure Control • Strap on Hot Water Control

  13. Starter and Speed Control Switch • Manual Starter • 5.0 Amp Speed Control Switch

  14. Phenolic Coating • V1 – Phenolic Coating (Air Dried) • The unit is coated with the HeresiteVR-514 coating. • It is a special primer-finish combination that is specifically designed for salt water services. • It is ideal for use in building located on or near the ocean or other large bodies of salt water. • V2 – Phenolic Coating (Baked) • The unit is coated with the Libcote-7-9818 coating. • It is specifically designed for use in moist, wet or damp environments. • It is ideal for use in waste water treatment plants or in spaces with excessive amounts of steam or humidity in the air.

  15. HS Tstats • U1- Line Voltage Stat “Off/Auto Switch” • U2 – Line Voltage Stat “Auto/Off/Fan Switch” • U3 – Line Voltage Stat “Auto/Off/ Fan Switch”

  16. Tstats Continued • U4 – Celsius Line Voltage Thermostat • W1 – T6169C Line Voltage Thermostat w/Subbase (Light Duty) – (VS Only)

  17. VS Tstats • W2 – T4051A Line Voltage Thermostat (Heavy Duty) • W4 – Q651A1009 Stat Subbase Only (Used with T4051A1003 for “Off/Auto Switch”)

  18. Disconnect • 460/575 Three Phase • 208/230 Three Phase • 115/230 Single Phase

  19. HS Room Layout When selecting unit size and location keep the following items in mind: • How close will the unit be to people and small items? You don’t want a unit 4 feet from someone’s desk blowing 5,500 CFM at them • Always direct units toward areas of higher heat loss such as bay doors and truck loading docks • Fans with higher RPM will be louder than fans with lower RPM • See unit IOM for additional information

More Related