1 / 11

Linux network troubleshooting

Linux network troubleshooting. If your network is not working. Quick troubleshoot. Check that network cable is connected and one of NIC’s leds is lit. Also check that computer is powered on! If possible go to switch/hub where your machine is connected and check that connection led is lit.

donny
Download Presentation

Linux network troubleshooting

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Linux network troubleshooting If your network is not working..

  2. Quick troubleshoot Check that network cable is connected and one of NIC’s leds is lit. Also check that computer is powered on! If possible go to switch/hub where your machine is connected and check that connection led is lit. Is network leds seem to be ok, restart network with following command: service network restart (works with CentOS, fedora core and redhat) /etc/init.d/network restart (should work with other distributions also) Check what ifconfig tells you. If you’re not root user, you can check ifconfig with following command: /sbin/ifconfig

  3. Connection and ip-address seems to be ok. Interface has received and sent some packages. [root@firewall ~]# /sbin/ifconfig eth0 Link encap:Ethernet HWaddr 00:10:5A:39:AC:1D inet addr:172.240.1.20 Bcast:172.240.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:7314123 errors:7 dropped:0 overruns:0 frame:7 TX packets:1894956 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:52529182 (50.0 MiB) TX bytes:234026392 (223.1 MiB) Interrupt:11 Base address:0xd000

  4. If your ip-address isn’t shown, you most probably have DHCP enabled and DHCP-server is not giving you any address. If you don’t get ip-address Linux might interface disabled. You can use dhclient command manually to restart dhcp search. [root@firewall ~]# ifconfig eth0 Link encap:Ethernet HWaddr 00:10:5A:39:AC:1D UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:14 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 MiB) TX bytes:0 (0.1 MiB) Interrupt:11 Base address:0xd000

  5. [root@firewall ~]# /sbin/route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.7.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 172.24.16.0 0.0.0.0 255.255.252.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth1 0.0.0.0 172.24.16.1 0.0.0.0 UG 0 0 0 eth0 Check that default GW exists! If you have two network adapters check that there’s only one default GATEWAY!

  6. CentOS network configuration files Exist in /etc/sysconfig –folder [root@firewall ~]# more /etc/sysconfig/network NETWORKING=yes HOSTNAME=firewall.datacom.intra.fi GATEWAY=172.24.16.1 The default GATEWAY can be set in network file or ifcfg-ethX file. It’s easier to troubleshoot if you have gateway set in one file only. If you have two network adapters check that there’s only one default GATEWAY!

  7. Centos Interface configuration file (DHCP) [root@firewall ~]# more /etc/sysconfig/network-scripts/ifcfg-eth0 DEVICE=eth0 BOOTPROTO=dhcp HWADDR=00:50:8B:5D:EE:1A ONBOOT=yes TYPE=Ethernet Dhcp gets all addresses automatically, only thing you need to set is BOOTPROTO. If your network still doesn’t work, you can add network configuration manually with following commands: ifconfig eth0 192.168.7.220 netmask 255.255.255.0 broadcast 192.168.7.255 route add default gw 192.168.7.1

  8. Centos Interface configuration file (static) [root@firewall ~]# more /etc/sysconfig/network-scripts/ifcfg-eth0 DEVICE=eth0 BOOTPROTO=static ONBOOT=yes TYPE=Ethernet HWADDR=00:50:8B:5D:EE:1A IPADDR=172.24.16.240 NETMASK=255.255.252.0 NETWORK=172.24.16.0 BROADCAST=172.24.19.255 Static configuration for interface eth0. You must define at least IPADDR and NETMASK. If you have other than basic class C network specify also BROADCAST and NETWORK addresses. Remember to change BOOTPROTO to static if you’re setting static address manually!

  9. Ubuntu/(Debian)Interface configuration file (DHCP) Exist in /etc/network –folder root@ubuntuserver:/home/test1# more /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The primary network interface auto eth0 iface eth0 inet dhcp

  10. Ubuntu/(Debian) Interface configuration file (static) Exist in /etc/network –folder root@ubuntuserver:/home/test1# more /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The primary network interface auto eth0iface eth0 inet staticaddress 172.24.16.240netmask 255.255.252.0gateway 172.24.16.1

  11. Quick DNS checkup • Name servers for machine are defined in /etc/resolv.conf –file. • [root@clump coursefiles]# more /etc/resolv.conf search dc.turkuamk.fi nameserver 193.166.135.5 nameserver 193.166.139.5 • Easy way to check that name servers work: 1) ping www.funet.fi 2) ping 193.166.3.7 • If both pings works, then name servers are working • If only the last ping works, then you have some problems with your name server configuration • If both pings fail, check ifconfig and default route

More Related