1 / 11

Test Results of Assembled Type 1 Modules

Test Results of Assembled Type 1 Modules. Carla M. Vale Phobos Coll. Meeting, 31 Jul 1998. Tests Performed on the Modules. Calibration Chips’ status Gain Dead channels Source Test Noise Hit Distribution Pad Signal Distribution Signal/Noise. Settings 1 V fp = -350 mV

Download Presentation

Test Results of Assembled Type 1 Modules

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Test Results of AssembledType 1 Modules Carla M. Vale Phobos Coll. Meeting, 31 Jul 1998

  2. Tests Performed on the Modules • Calibration • Chips’ status • Gain • Dead channels • Source Test • Noise • Hit Distribution • Pad Signal Distribution • Signal/Noise

  3. Settings 1 Vfp = -350 mV Vfs = 700 mV Ipre = 6.0 mA Isha = 168 mA Ibuf = 140 mA tpeak = 1.6ms Average gain: ~ 3.5 mV/fC VA analog current/line (*) =1.1mA/fC Settings 2 Vfp = -550 mV Vfs = 700 mV Ipre = 6.0 mA Isha = 168 mA Ibuf = 280 mA tpeak = 1.6ms Average gain: ~ 5.2 mV/fC VA analog current/line (*) =1.6mA/fC CalibrationTests (*) =gain/3.235 mV/mA By using “Settings 2”, we eliminate undershoot in the signal, improving gain and signal/noise.

  4. Calibration on Module1-0005 Set-up effects Dead channels Calibration done using“Settings 2”

  5. Calibration on Module1-0005 Calibration done using“Settings 1”

  6. Noise: with C.M.N. correction dead channels: shorted lines <Noise> = 0.23 fC = 1440 e-

  7. Noise: without C.M.N. correction  C.M.N = 0.9 mV ~ random noise

  8. Source Test on Module1-0005 “gaps”  pad geometry

  9. SourceTest: Signal Peak Signal = 20 mV Peak signal (mV) / Gain (mV/fC)= 20 / 5.2 = 3.8 fC ~ 1 MIP

  10. Source Test: S/ N Peak S/N = 16.5

  11. Test Results on Assembled Modules

More Related