1 / 57

Grid Quality and Resolution Issues from the Drag Prediction Workshop Series

Grid Quality and Resolution Issues from the Drag Prediction Workshop Series. The DPW Committee Dimitri Mavriplis : University of Wyoming USA J. Vassberg, E. Tinoco, M. Mani : The Boeing Company USA O. Brodersen, B. Eisfeld: DLR Braunschweig, GERMANY

dcaraballo
Download Presentation

Grid Quality and Resolution Issues from the Drag Prediction Workshop Series

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Grid Quality and Resolution Issues from the Drag Prediction Workshop Series The DPW Committee Dimitri Mavriplis : University of Wyoming USA J. Vassberg, E. Tinoco, M. Mani : The Boeing Company USA O. Brodersen, B. Eisfeld: DLR Braunschweig, GERMANY R. Wahls, J. Morrison: NASA Langley Research Center , USA T. Zickhur, D. Levy: Cessna Aircraft Co. USA M. Murayama: Japan Aerospace Exploration Agency, JAPAN

  2. Motivation • DPW Series • Assess State-of-art for Transonic Cruise Drag Prediction using RANS methods • DPW I: Anaheim CA, June 2001 • DPW II: Orlando FL, June 2003 • DPW III: San Francisco CA, June 2006 • DPW IV: June 2009 • Considerable scatter in results particularly for cases with flow separation (off-design) • Emerging Consensus • Discretization errors are (a) dominant source of error

  3. Motivation • DPW focused increasingly on assessing discretization/grid induced errors • DPW I: Single grid study • DPW II: Grid convergence study (3 grids) • DPW III: All results examined in context of grid convergence study (3 or 4 grids) • Implications • Dominant discretization errors preclude accurate assessment of other errors • Turbulence/transition modeling

  4. Motivation • DPW demonstrated grid convergence for some codes mostly for attached flow cases • Separated flow cases much more difficult to obtain grid independent results • Scatter often does not decrease with increasing grid resolution • Contradictory grid convergence results • Different grid families converge to different results

  5. Overview • Overview of DPW test cases • DPW Gridding Guidelines • Discussion of gridding issues • Grid Resolution • Grid Convergence • Grid Quality • Possible improvements • Conclusions

  6. DLRF4-F6 Test Cases (DPW I,II,III) • Wing-Body Configuration • Transonic Flow • Mach=0.75, Incidence = 0 degrees, Reynolds number=3,000,000

  7. DPW III Series Cases • Designed fairing to suppress flow separation (Vassberg et al. AIAA 2005-4730)

  8. DPW III Series Cases • 2 closely related simple wing geometries • Well behaved flow • Enhanced grid refinement study (4 grids)

  9. General Gridding Guidelines • Grid Resolution Guidelines • BL Region • Y+ < 1.0, 2/3, 4/9, 8/27 (Coarse,Med,Fine,VeryFine) • 2 cell layers constant spacing at wall • Growth rates < 1.25 • Far Field: 100 chords • Local Spacings (Medium grid) • Chordwise: 0.1% chord at LE/TE • Spanwise spacing: 0.1% semispan at root/tip • Cell size on Fuselage nose, tail: 2.0% chord • Trailing edge base: • 8,12,16,24 cells across TE Base (Coarse,Med,Fine,Veryfine) • Grid Convergence Sequences • X3 increase in resolution per refinement • Maintain same family of grids in sequence

  10. Overset Meshes (DPW III)

  11. Overset Meshes (DPW III)

  12. Structured Multi-Block Wing-Body Grids Constructed with Boeing Zeus/Advancing Front Method

  13. Typical Wing Grid H-H Topology Embedded Blunt Trailing Edge Grid Block

  14. VGRID : Wing Body (~40M pts)

  15. VGRID : Wing Alone (~30M pts)

  16. DPW Submitted Grids • Wide variety of grid types and constructions • Grid topology and type affects local resolution • Compliance with guidelines not evaluated precisely • Large data-base of high-quality aero grids made available

  17. DPW I RESULTS (circa 2001) • Drag polar for single grid resolution

  18. DPW II RESULTS (circa 2003) • Drag vs number of grid points (Wing-body alone)

  19. DPW III RESULTS (2006) • Idealized drag vs grid index factor (N-2/3) • Wing-body and Wing-body+fairing

  20. Grid Related Experiences from DPW • Grid Resolution • Grid Convergence • Grid Quality

  21. Grid Resolution • Always need more • DPW I: ~ 3M pts • DPW III: ~ 40M pts • Interim/Follow-on studies/DPW4: > 100M pts • Grid convergence studies point to need for > 109 pts • Wide range of scales present in aerodynamics • Highly variable: • Far field ~100 MAC • Trailing edge ~.01 MAC • Anisotropic: • Boundary Layer Y+=1: ~ 10-6 MAC

  22. Grid Resolution • Wide range of scales requires: • Intuition or rule-based grid generation • Anisotropic in Boundary Layer (and spanwise) • Codified in DPW guidelines • Effect of Grid Resolution is Complex • Direct effect on surface profiles is small • Indirect effect can be large • Location of separation • Integration of small differences  Lift, Drag, Moment

  23. W1 Grid Convergence Study • CP at station 5:

  24. W1 Grid Convergence Study • CP at station 5:

  25. W1 Grid Convergence Study • CP at station 5:

  26. W1 Grid Convergence Study • CP at station 5:

  27. Effect of Normal Spacing in BL • Inadequate resolution under-predicts skin friction • Direct influence on drag prediction • Indirect influence: Wrong separation prediction

  28. Effect of Normal Resolution for High-Lift(c/o Anderson et. AIAA J. Aircraft, 1995) • Indirect influence on drag prediction • Easily mistaken for poor flow physics modeling

  29. Grid Resolution • Separated flow cases more demanding and often contradictory experiences

  30. Grid Resolution • Side-of-Body Separation increases with grid resolution • Boeing: Overset • Boeing: Unstructured • DLR: Unstructured • Side-of-Body Separation constant with grid resolution • Boeing: Block Structured • JAXA: Block Structured, Unstructured • Trailing edge separation grows with grid res: • UW : Unstructured (NSU3D) • Trailing edge separation constant with grid res: • JAXA: Structured, Unstructured • Boeing: Overset • Experimentation with much finer grids required to understand behavior…

  31. Grid Convergence • Increased focus of DPW Series • For second-order accurate method, error should decrease as O(h2) • Define average cell size h as: N-1/3 • N=number of grid pts • Drag vs N-2/3 should plot as straight line • Project to y-axis to get continuum value

  32. Importance of Grid Convergence Agreement on initial grid (DPW I) gets worse (Lee-Rausch et al. AIAA-2003-3400)

  33. Grid Convergence • Grids must come from same “family” • Self-similar topologically • Same relative variations of resolution • Achieved through IJK factors for structured grids • Requires global grid spacing factor for unst. grids • Boundary layer growth must be taken into account • Not clear how well all grids meet these requirements • Most likely represents state-of-art • Perform grid convergence at fixed Lift or fixed incidence conditions ?

  34. Grid Convergence (Overflow) • Grid convergence for attached flow cases • Inconsistent behavior for separated flow case • Separation bubble grows with grid resolution

  35. Grid Convergence (Wing Alone) • More consistent grid convergence at fixed CL

  36. W1-W2 Grid Convergence Study(NSU3D Unstructured) • Apparently uniform grid convergence

  37. W1-W2 Results • Discrepancy between results on 2 different families of grids (both generated with VGRID)

  38. W1-W2 Results • Removing effect of lift-induced drag : Results on both grid families converge consistently • Consistent grid convergence at fixed CL instead of alpha

  39. Grid Quality • Distinguish grid quality from grid resolution • Relative distribution of resolution • Topology • Element type/shape • Aspect ratio • Orthogonality (BL, hybrid) • Grid quality is (should be) constant for self-similar family of grids used for grid convergence study

  40. Two Unstructured Grid Topologies 65 million pt grid 72 million pt grid High Resolution grids for DLR-F6 (DPW II) using NSU3D solver

  41. Grid Convergence on Topology #1 • Drag is grid converging • Sensitivity to dissipation decreases as expected

  42. 65M pt mesh Results • 10% drop in CL at AoA=0o: closer to experiment • Drop in CD: further from experiment • Same trends at Mach=0.3 • Little sensitivity to dissipation

  43. Grid Convergence • Grid convergence apparent using self-similar family of grids • Large discrepancies possible across grid families • Sensitive areas • Separation, Trailing edge • Pathological cases ? • Would grid families converge to same result limit of infinite resolution ? • i.e. Do we have consistency ? • Due to element types ?, Aspect ratio ? • Possible ways forward: • Higher order discretizations • Adjoint-based error estimation

  44. Adjoint-Based Spatial Error Estimation + AMR Mach number contours Adjoint solution, Λ(2) • Adjoint Solution : Green’s Function for Objective (Lift) • Change in Lift for Point sources of Mass/Momentum • Error in objective ~ Adjoint . Residual (approx. solution) • Predicts objective value for new solution (on finer mesh) • Cell-wise indicator of error in objective (only) Li Wang and Dimitri Mavriplis

  45. h-refinement for target functional of lift Final h-adapted mesh (8387 elements) Close-up view of the final h-adapted mesh Li Wang and Dimitri Mavriplis Fixed discretization order of p = 1

  46. h-refinement for target functional of lift Error convergence history vs. degrees of freedom Functional Values and Corrected Values Li Wang and Dimitri Mavriplis Comparison between h-refinement and uniform mesh refinement

  47. Complex Geometry: Vehicle Stage Separation(CART3D/inviscid) Top View Initial Mesh Side View • Initial mesh contains only 13k cells • Final meshes contain between 8M to 20M cells

  48. Pressure Contours M∞=4.5, α=0°

  49. Minimal refinement of inter-stage region • Gap is highly refined • Overall, excellent convergence of functional and error estimate Cutaway view of inter-stage

  50. Unsteady Problems Total error in solution Algebraic error Spatial error (discretization/resolution) Temporal error (discretization/resolution) Flow Mesh Other Flow Mesh Other Flow Mesh Other • Solution of time-dependent adjoint: backwards integration in time • Disciplinary adjoint inner product with disciplinary residual

More Related