1 / 17

Chapter 12– Magnetic Circuits

Chapter 12– Magnetic Circuits . Introductory Circuit Analysis Robert L. Boylestad. 12.1 - Introduction. Magnetism is an integral part of almost every electrical device used today in industry, research, or the home.

daria
Download Presentation

Chapter 12– Magnetic Circuits

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Chapter 12– Magnetic Circuits Introductory Circuit Analysis Robert L. Boylestad

  2. 12.1 - Introduction • Magnetism is an integral part of almost every electrical device used today in industry, research, or the home. • Generators, motors, transformers, circuit breakers, televisions, computers, tape recorders and telephones all employ magnetic effects to perform a variety of important tasks.

  3. 12.2 – Magnetic Field Flux and Flux Density • In the SI system of units, magnetic flux is measured in webers (Wb) and is represented using the symbol . • The number of flux lines per unit area is called flux density (B). Flux density is measured in teslas (T). • Its magnitude is determined by the following equation:

  4. Magnetic Fields Permeability • Magnetic materials, such as iron, nickel, steel and alloys of these materials, have permeability hundreds and even thousands of times that of free space and are referred to as ferromagnetic. • The ratio of the permeability of a material to that of free space is called relative permeability.

  5. 12.3 – Reluctance • The resistance of a material to the flow of charge (current) is determined for electric circuits by the equation • The reluctance of a material to the setting up of magnetic flux lines in a material is determined by the following equation

  6. 12.4 – Ohm’s Law For Magnetic Circuits • For magnetic circuits, the effect is the flux . • The cause is the magnetomotive force (mmf) F,which is the external force (or “pressure”) required to set up the magnetic flux lines within the magnetic material. • The opposition to the setting up of the flux  is the reluctance .

  7. Ohm’s Law For Magnetic Circuits • Substituting • The magnetomotive force F is proportional to the product of the number of turns around the core (in which the flux is to be established) and the current through the turns of wire

  8. 12.5 – Magnetizing Force • The magnetomotive force per unit length is called the magnetizing force (H). • Magnetizing force is independent of the type of core material. • Magnetizing force is determined solely by the number of turns, the current and the length of the core.

  9. 12.6 – Hysteresis • Hysteresis – The lagging effect between the flux density of a material and the magnetizing force applied. • The curve of the flux density (B) versus the magnetic force (H) is of particular interest to engineers.

  10. Hysteresis • The entire curve (shaded) is called the hysteresis curve. • The flux density B lagged behind the magnetizing force H during the entire plotting of the curve. When H was zero at c, B was not zero but had only begun to decline. Long after H had passed through zero and had equaled to –Hd did the flux density B finally become equal to zero

  11. 12.7 – Ampère’s Circuital Law • Ampère’s circuital law: The algebraic sum of the rises and drops of the mmf around a closed loop of a magnetic circuit is equal to zero; that is, the sum of the rises in mmf equals the sum drops in mmf around a closed loop. F = 0

  12. 12.8 – Flux  The sum of the fluxes entering a junction is equal to the sum of the fluxes leaving a junction. a=b+ c or b +c= a both of which are equivalent

  13. 12.9 – Series Magnetic Circuits: Determining NI • Two types of problems •  is given, and the impressed mmf NI must be computed – design of motors, generators and transformers • NI is given, and the flux  of the magnetic circuit must be found – design of magnetic amplifiers • Table method • A table is prepared listing in the extreme left-hand column the various sections of the magnetic circuit. The columns on the right are reserved for the quantities to be found for each section

  14. 12.10 - Air Gaps Effects of air gaps on a magnetic circuit • The flux density of the air gap is given by where g = core Ag = Acore • Assuming the permeability of air is equal to that of free space, the magnetizing force of the air gap is determined by • And the mmf drop across the air gap is equal to Hg Lg

  15. 12.11 – Series-Parallel Magnetic Circuits Close analogies between electric and magnetic circuits will eventually lead to series-parallel magnetic circuits similar in many respects to electric circuits encountered previously (in Chapter 7).

  16. 12.12 – Determining  • When determining magnetic circuits with more than one section, there is no set order of steps that will lead to an exact solution for every problem on the first attempt. • Find the impressed mmf for a calculated guess of the flux  and then compare this with the specified value of mmf. • Make adjustments to the guess to bring it closer to the actual value. • For most applications, a value within 5% of the actual  or specified NI is acceptable.

  17. 12.13 – Applications • Speaker and microphones • Hall effect sensor • Magnetic reed switch • Magnetic resonance imaging

More Related