1 / 13

Building the 5.5 HP Tecumseh

Building the 5.5 HP Tecumseh. Spark Plug, Magneto, Magneto Pin/ Bushing, Flywheel. What are the 4 steps of combustion?. 1. INTAKE 2. COMPRESSION 3. SPARK 4. EXHAUST. The 4 Steps of Combustion. Crankshaft. Cylinder Head. Add The Spark Plug.

daria
Download Presentation

Building the 5.5 HP Tecumseh

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Building the 5.5 HP Tecumseh Spark Plug, Magneto, Magneto Pin/Bushing, Flywheel.

  2. What are the 4 steps of combustion? • 1. INTAKE • 2. COMPRESSION • 3. SPARK • 4. EXHAUST

  3. The 4 Steps of Combustion

  4. Crankshaft

  5. Cylinder Head

  6. Add The Spark Plug • Make sure to screw it in with your HAND before tightening with a SOCKET!

  7. Oil Pressure Sensor • Make sure the oil pressure sensor is lined up correctly and fastened down. • What does this part do??

  8. Flywheel Pin and Bushing • 1. Slip the flywheel bushing over the end of the crankshaft output shaft. • 2. LIGHTLY tap the flywheel retaining pin into the groove as shown • What does this part do??

  9. Adding The Flywheel • 1. Place the flywheel on the crankshaft shaft AND ALIGN WITH THE PIN! • 2. Place the COLLAR on top • 3. Add the WASHER AND NUT. • 4. Tighten down

  10. Adding The Magneto • 1. Align the Magneto with the holes and loosely tighten bolts WITH YOUR HANDS! • 2. Make sure there is a LITTLE GAP (about the width of a nickel) between the Magneto and the Flywheel. • 3. Tighten down the bolts

  11. Connect The Spark Plug Wire • Connect the Spark Plug Wire to the Spark Plug. • You should hear a little “pop” sound.

  12. The 4 Steps of Combustion

  13. HI FIVE! • GREAT TEAMWORK SO FAR ON THE BUILD! Crankcase!! Cylinder Head!! IGNITION!!!

More Related