1 / 14

The Lead Glass Detector

The Lead Glass Detector. Overview, Experience and Direction. The previous incarnation. An effective mass distribution. 6 photon events identified as hp 0 p 0 Low mass structure is the h” prime Other structures are well known. Use with charged particle measurements.

darci
Download Presentation

The Lead Glass Detector

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. The Lead Glass Detector Overview, Experience and Direction

  2. The previous incarnation

  3. An effective mass distribution • 6 photon events identified as hp0p0 • Low mass structure is the h” prime • Other structures are well known

  4. Use with charged particle measurements • The FCAL can reconstruct a decay into all photons, the resulting reconstructed particles can be used with charged particle measurements

  5. Correlate with beam • If the beam momentum is known, momentum transfer distributions can be measured

  6. Time measurements • At right is a typical pulse from a PMT, digitized at 2GHz, 8 bits. Marked are location of the pulse peak and 50% crossing. A library of such pulses exists.

  7. Time measurements • `Scope sampled pulses fitted to polynomial to extract feature times • Compressed to simulate 8 bit/250 MHz signal • Algorithm used to determine feature time • 300 ps resolution is possible • Each block in a photon cluster gives a time measurement • Time measurements are independent of vertex position and momentum

  8. FCAL can be used in the trigger • Deadtimeless digital energy summation on the detector, less than 8 msec • Level 3 possible if required, can be very fast, very general requirements can be imposed,

  9. Current status • All blocks, tubes at Jlab, Inner frame at IU • Status of tubes unknown, were working in 1997 • Status of glass unknown, some radiation damage observed in 1995, very localized, caused by mis-steered beam. Some blocks used in RadPhi, known to be damaged • No appropriate mechanical structures exist

  10. Current status, contd. • Design of digitizer has begun, Paul Smith will/has say/said more • Magnetic field/shielding studies begun, have shown cellular wall shields longitudinal field, shielding effect increases as distance from an edge. Inner frame material an issue.

  11. To do, short term • Transfer glass, tubes to IU for evaluation • Measure transmission of blocks, data base to determine block quality, UV cure any damaged blocks (probably < 500 blocks) • Measure tube responses, relative gains, random noise, data base of tube parameters • $40K, 1 year to complete

  12. Radiation Damage Curing

  13. To do, near term • Design/Construction of: • Inner frame • Cellular Wall • Darkroom • Cable runs • Electronics carriers • Monitor system • ~$500k, two years, not including electronics

  14. To do, longer term • Outer frame appropriate for specific application, for example, GlueX • Motion along beam, small motion transverse to beam for alignment • Interfaces to services, DAQ, power, cooling/heating, fire suppression, safety, etc. • Integration with other detector elements, ToF in particular • Budget undetermined/Construction issue

More Related