1 / 3

Discharge Time-Constants

Discharge Time-Constants. Basis : EDMS 90327 (Voltage Withstand levels) & EDMS 1011223 (Quench Back) Dipoles have an inductance of 154 * 0.1 H per sector Dipoles have 2 times 3 resistors of 0.225 in parallel. 4 Configurations are possible. Dipoles. Dump Overheating.

damian-snow
Download Presentation

Discharge Time-Constants

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Discharge Time-Constants Basis : EDMS 90327 (Voltage Withstand levels) & EDMS 1011223 (Quench Back) Dipoles have an inductance of 154 * 0.1 H per sector Dipoles have 2 times 3 resistors of 0.225 in parallel 4 Configurations are possible. MP3 15.July 09, KHM

  2. Dipoles Dump Overheating 1500 Volt Limit (Switch) 1900 Volt Limit Operational Limit τ Quench Detection Limit Voltage/Dipole MP3 15.July 09, KHM

  3. Quadrupoles Inductance: 51*5.6 mH, Rdump: 9.2 mΩ + Radd No overheating of existing resistors, Switch limit & operational =200 V, ELQA: 240 V QPS to be modified Quench Protection Limit is off scale Operational Limit & Switch Limit (can be modified) Ultimate Limit (ELQA) τ MP3 15.July 09, KHM

More Related