1 / 30

PART FOUR Chapter 11: Sculpture and Installation

PART FOUR Chapter 11: Sculpture and Installation. Sculpture methods covered in this chapter include: Modeling (additive) Assembling (additive) Carving (subtractive) Casting (involves a mold). Key Terms for this chapter include:. terra cotta mold lost-wax process “in the round”

dalia
Download Presentation

PART FOUR Chapter 11: Sculpture and Installation

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. PART FOURChapter 11: Sculpture and Installation Sculpture methods covered in this chapter include: • Modeling (additive) • Assembling (additive) • Carving (subtractive) • Casting (involves a mold) © 2013, McGraw-Hill Higher Education. All rights reserved.

  2. Key Terms for this chapter include: • terra cotta • mold • lost-wax process • “in the round” • low relief (bas-relief) • high relief • contrapposto • installation • earthwork • time-based work © 2013, McGraw-Hill Higher Education. All rights reserved.

  3. Sculpture and Installation Sculpture involves works of art dealing with three-dimensional space. Three-dimensional involves: Height, Width, and Depth “In the round”: Freestanding artwork that can be viewed from any angle; completed on all sides. © 2013, McGraw-Hill Higher Education. All rights reserved.

  4. Maman, Louise Bourgeois, 1999, bronze cast

  5. Sculpture In relief, forms project from but remain attached to a background surface; meant to be viewed frontally. • Low Relief: Also called bas-relief; figures project only slightly from the background. • High Relief: Forms dramatically project from the background by generally at least half their depth. Insert visual(s). Suggestion: 11.3 Durga Fighting the Buffalo Demon © 2013, McGraw-Hill Higher Education. All rights reserved.

  6. Low relief (bas-relief) and High Relief Sarcophagus lid, Mexico, Mayan late Classical Period *Durga Fighting the Buffalo Demon, cave, India.

  7. MODELING Modeling is an additive process. The sculptor begins with a framework or nothing at all and adds material until the sculpture is finished. It is a very direct method of working. • Clay, also known as terra cotta, is the most common modeling material. Insert visual(s). Suggestion: 11.4 Figurine of a Voluptuous Lady © 2013, McGraw-Hill Higher Education. All rights reserved.

  8. Figurine of a Voluptuous Lady, Maya, 700-900, ceramic

  9. CASTING Casting is a very indirect method of working. It involves a moldof some kind into which liquid or semi liquid is poured and allowed to harden. • Bronze is a common casting material. Insert visual(s). Suggestion: 11.5 The Bodhisattva Avalokiteshvara © 2013, McGraw-Hill Higher Education. All rights reserved.

  10. CASTING The lost-wax processis the most common method for casting. The wax original is destroyed in the process making each sculpture cast unique. © 2013, McGraw-Hill Higher Education. All rights reserved.

  11. Bodhisattva, India, 12thc, Pala Dynasty

  12. Micael Jackson and Bubbles, Jeff Koons, 1988, ceramic Daylight, Rachel Whiteread, 2010, Resin.

  13. CARVING In carving the sculptor begins with a block of material and cuts, chips, and gouges away until the form emerges. It is a subtractive process. • Wood and stone are the principal materials historically used for this process. Insert visual(s). Suggestion: 11.9 Virgin and Child on the Crescent Moon © 2013, McGraw-Hill Higher Education. All rights reserved.

  14. Virgin and Child on the Crescent Moon, 1495, Limewood *Colossal Head,Olmec, 1500-300, Basalt

  15. ASSEMBLING In assembling,individual pieces, segments, or objects are brought together to form a sculpture. It is an additive process. Insert visual(s). Suggestions: 11.11 Cubi XII 11.13 C.F.A.O. © 2013, McGraw-Hill Higher Education. All rights reserved.

  16. Cubi XII, 1963, Stainless Steel, 1963 C.F.A.O., Martin Puryear, 2006-7. Pine and found wheelbarrow

  17. *Conjoined, Roxy Paine, 2007. Stainless steel and concrete

  18. Sculpture: The Human Figure The human figure is a basic subject for sculpture throughout time. • Contrapposto: Meaning counterpoise or counterbalance; sets the body in a gentle S-shaped curve that implies the potential for human motion. Insert visual(s). Suggestion: 11.20 Apoxyomenos (Scraper) © 2013, McGraw-Hill Higher Education. All rights reserved.

  19. Menkaure and Khamerenebty, Egypt, 2490-2473 BC *The Burghers of Calais, Auguste Rodin, 1884-85, Bronze

  20. Kuya Preaching, Kamakura period, before 1207 Spirit Spouse, Ivory Coast , early 20th century, wood

  21. *Dying Slave, Michelangelo, 1535-16 Apoxyomenos, (Scraper),Roman copy of Lyssipos, 320, marble Contrapossto – slight weight shift (from Greeks)

  22. Quantum Cloud XX (tornado), Anthony Gormley, 2000, stainless steel

  23. Working with Time and Place Human beings also sculpt the landscape and specific environments. There are practical, religious, and aesthetic reasons for this type of sculpture. Insert visual(s). Suggestion: 11.25 Serpent Mound © 2013, McGraw-Hill Higher Education. All rights reserved.

  24. Working with Time and Place • Earthwork: A work of art made for a specific place using natural materials found there, especially the earth itself. • Installation: An artist modifies a space in some way and asks us to enter, explore, and experience it. © 2013, McGraw-Hill Higher Education. All rights reserved.

  25. *Serpent Mound, near Locust Grove, OH

  26. Reconstructed Icicles, Andy Goldsworthy, 1995

  27. Fireflies on the Water, Yayoi Kusama, 2002, 150 lights and water

  28. *Red Room, (Child), Louise Bourgeois, Installation, 1994

  29. *The Gates,Christo and Jeanne-Claude, 2/12-17/05, Installation in Central Park

  30. Sculpture and Installation: Summary Sculpture Methods Key Terms terra cotta mold lost-wax process “in the round” low and high relief Modeling Assembling Carving Casting contrapposto installation earthwork time-based work © 2013, McGraw-Hill Higher Education. All rights reserved.

More Related