1 / 19

NICAM : DX=3.5km

The 2010 Workshop on the Solution of Partial Differential Equations on theSphere August 24-27, 2010. Alteration of vertical grid in NICAM towards the super-high resolution simulations Hirofumi TOMITA RIGC / JAMSTEC. NICAM : DX=3.5km. MTSAT-1R. Outline. Introduction of NICAM

crevan
Download Presentation

NICAM : DX=3.5km

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. The 2010 Workshop on the Solution of Partial Differential Equations on theSphereAugust 24-27, 2010 Alteration of vertical grid in NICAMtowards the super-high resolution simulationsHirofumi TOMITARIGC / JAMSTEC NICAM : DX=3.5km MTSAT-1R

  2. Outline • Introduction of NICAM • Summary of current version of DC • Vertical problem • Horizontal high resolution run • PGF error • Land surface model coupling • Future research plans using the next generation supercomputer in JAPAN • 10PFLOPS machine in Kobe • Named “K-computer” • Summary

  3. Summary of NICAM dynamical core

  4. NICAM dynamical core (1) • Horizontal grid • Icosahedralgrid • modification by spring dynamics • Reallocation of grid to gravitational center of control volume Tomita et al. 2001,2002, JCP

  5. NICAM dynamical core (2) • Vertical grid • Terrain-following coordinate • with Lorentz grid • Governing equation • Non-hydrostatic equation • with deep atmosphere Tomita & Satoh 2004, Fluid.Dyn.Res Satoh et al.2008 JCP Continuity eq. Horiz. ,mom. eq. Vert. ,mom. eq. Energy. eq.

  6. NICAM dynamical core (3) • Solver • Split explicit method • Fast mode ( e.g. acoustic wave, gravity wave ) • Small time step ( forward-backward ) • Slow mode ( e.g. advection term ) • Large time step ( by RK2 or RK3 ) • In slow mode • Horizontal explicit / vertical implicit scheme

  7. NICAM dynamical core (3) • Horizontal advection scheme • Miura ( 2007, MWF ) scheme with Thurburn(1996) flux limiter • Simple way of flux estimation • 2nd order and monotonicity. • Consistency With Continuity in tracer advection. • Niwa et al. (2010) • Operator splitting into horizontal and vertical directions • Use of intermediate density (Easter(1993))

  8. Option of other grid configuration in NICAM • icosahedral grid • different topology • Non-uniform resolution(Iga 2010, MWR submitted ) • Stretched (Tomita2008)

  9. Vertical problem of dynamical core at the high-resolution runs

  10. Numerical problem • Owing to steep mountain& terrain following coordinate • In TFC, one reference state should be set in all the region. • Limited area model • No problem • Global model • Difference from reference state is large. • > 50K between tropics and polar region. • Pressure gradient force error! • Remedy : setting the mid-latitude profile as the reference state. • Tibetan Platau, Rocky mountain, Andes mountain are in the mid-latitude. The simulation result depends on the reference state!

  11. Sometimes, the model blow up at the high resolution simulation! • PGF error acts violently! • So-called “hydrostatic inconsistency • Reconsideration of vertical discretization from the terrain-following coordinate to height basis coordinate. • Vertical adaptive mesh for the PBL scheme. The problem becomes severe when the resolution increases!

  12. Problem about coupling with land model(1) • Energy balance equation at the interface • Usual way: • explicit estimation of bulk coef in the surface flux : using the previous skin temperature.  oscillatory of skin temp. Long wave Sensible heat Ground flux Short wave latent heat Typical diurnal variation of skin temperature At dawn & suset, bulk coef. is oscillatory!

  13. Problem about coupling with land model(2) • Best Solution • Atmosphere vertical turbulence & surface energy balance is implicitly solved at the same time. • However,,,,, • Modulization? • We want to pursue the separate modules for atmosphere turbulence and land surface model. • Another solution • The bulk coefficient at the surface is implicitly solved! Tomita (2009, JHM)

  14. Research plans toward the next-generation supercomputer

  15. The next-generation supercomputer in Kobe • The next-generation supercomputer system (~2012) • System • One nodes: • 128GFLOPS • Memory band width : 64GB/s • B/F : 0.5 • 80k nodes/640k core • Peak performacne : ~10PFLOPS • Total memory : ~1PB • Network 3D torus bi-direction 5GB/s X6

  16. What can we expect on it? Courtesy of Prof. H.Tanaka(Tsukuba Univ.) Miura et al. 2007 Next-generation supercomputer strategic program--- Field 3:Research of prediction of weather and climate contributing to disaster prevention • Change of tropical cyclone in the future climate • NICAM3.5km-model (7km model also) • Intensity • Frequency • Local information • Integration time : 10 years order • More reliable statistics • Predictability of tropical weather • NICAM3.5km, 1.7km • MJO, tropical cyclone, monsoon • How long can we extend the tropical prediction by GCRM?

  17. Grand challenge! • 野田暁氏提供 Global 400m mesh run • Collaboration project with RIKENand JAMSTEC • Horizontally 400m with 100 vertical levels • Truly, global cloud-resolving! • Use of the full computational resource • 1PBmemory • All computational nodes • Integration time :1 week? • Purpose: • Improve PBL cloud? • Improve detail structure of cumulus? • Diurnal cycle? • Computationally, • Well work in the case of full use? • Suggestion to the next-next computer systems plan

  18. How about the sustained performance? • Vector machine • Problem size:7km/L40 • ES:30~40% • ES2:10~15% • Scalar machine ( NO TUNING! ) • Cray XT4 (AMD Opteron ) : 2.9%(@ Oct. 2009) • collabolation with COLA & ECMWF • T2K tsukuba(AMD Opteron) : 3.3% • IBM :BlueGene/P : 6% • Good balance between memory access speed and CPU speed • Recent PC : Core i7(nehalem core)6% • Problem size : 240km/L54 • (owing to memory band widith:6.4GB/sX3=19.2GB/s) • B/Fratio:0.45 • The Next Generation Machine(BF : 0.5) • Default : 5% • Medium tuning : 10% • Highly tuining : 20%???

  19. Summary • NICAM: • Global non-hydrostatic atmospheric model • Icosahedral grid • Vertical discretization: • plan to change from terrain following coordinate to height based coordinate. • Future plans: • On the next-generation supercomputer system • Change of tropical cyclone in the future climate • Predictability of tropical weather • Grand Challenge! ( 400m global mesh with 100 levels. )

More Related