1 / 17

Machines!

Machines!. Physical Science. What are machines?. Machines can be anything from complex designs (cars, draw-bridges, elevators, etc.) to simple, everyday objects (hammers, screws, wheelbarrow)

coye
Download Presentation

Machines!

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Machines! Physical Science

  2. What are machines? • Machines can be anything from complex designs (cars, draw-bridges, elevators, etc.) to simple, everyday objects (hammers, screws, wheelbarrow) • Think about this: when you get a flat tire, is it easier to lift up your car with your bare hands, or is it easier to use a car jack to lift your car?

  3. Why make machines? • Machines redistribute the work we put into them • Can change the direction of a force • Can increase/decrease force by changing distance

  4. Forces • Input force • What we PUT INTO the machine • Output force • What force RESULTS from the machine

  5. Simple Machines • The following six machines is the basis for all machines:

  6. The Lever Family • Levers • Wheel and Axle • Pulleys

  7. Levers • All types have a rigid ARM and a point where everything turns on, called the FULCRUM • Force applied to one point on the arm, load lifted at another • Divided into three classes

  8. 1st Class Levers • Fulcrum is in between input and output points

  9. 2nd Class Lever • Fulcrum is at one end of arm, input force at other end, load is in the middle

  10. 3rd Class Lever • Your arm! One end is the fulcrum, the force comes from the middle, the output comes off of the other end

  11. Pulleys • Pulleys are used to lift objects • Flag on a flagpole • Sail on a sailboat • Using multiple pulleys can minimize/decrease input force

  12. Wheel and Axle • Made of a lever or pulley (wheel) connected to a shaft (axle) • When the wheel turns, the axle also turns • When a small input is applied to the wheel, the force is multiplied to a large output force applied to the steering column

  13. The Inclined Plane Family • Inclined plane • Wedge • Screw

  14. Inclined Plane • Multiply and redirect force • Small input force turns into large output force by spreading it over a distance

  15. Wedge • Functions like 2 inclined planes back to back • Push a ramp instead of pushing something up a ramp • Ex: Ax blade, Splitting wedge, and Nail

  16. Screws • Threads on a screw look like a spiral inclined plane • Jar lids

  17. Compound Machines • A machine made of more than one simple machine • Scissors? • 2 first class levers and 2 wedges • Car jack? • lever and large screw

More Related