1 / 12

ICD Status

ICD Status. ADC to GeV Conversion cal_examine Plots Mapping Other issues. Based on investigations by Alan Stone, Andy White, Leo Chan, Dean Schamberger, Lee Sawyer, Vishnu Zutshi and Bob Kehoe. Alan L. Stone Louisiana Tech University D Ø Collaboration Meeting.

Download Presentation

ICD Status

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. ICD Status ADC to GeV Conversion cal_examine Plots Mapping Other issues Based on investigations by Alan Stone, Andy White, Leo Chan, Dean Schamberger, Lee Sawyer, Vishnu Zutshi and Bob Kehoe Alan L. Stone Louisiana Tech University DØ Collaboration Meeting Alan L. Stone Louisiana Tech University

  2. ICD Cosmic Ray Test Stand Results • Convert Test Stand ADCs to DØ Calorimeter ADCs • Used CAL instead of ICD type preamps • Better separation between pedestal and MIP peak • Test stand signal boost by factor of 8.7 • Least count of test stand ADC was 1 mV & for Calorimeter it is 0.1 mV Average MIP Peak (368 channels) from data taken in Spring 2001 was 135.7 ADC Counts. Alan L. Stone Louisiana Tech University

  3. ADC to GeV Conversion • Average MIP peak in Calorimeter ADCs • [135.7×(1.0/0.1)]/[(22.5/5.5)×8.7] = 38.13 ADC counts • dE/dxmin = 2.02 MeV/cm (PVT Scintillator) • Energy deposition in ICD tile • [(CAL ADC counts)/38.13]×(2.02 MeV/cm)×1.27 cm • (CAL ADC counts)×(0.0000673)  [Energy in GeV] • Correct for flipped resistors (factor of 32/23) • (CAL ADC counts)×(0.0000936)  [Energy in GeV] • Current factor in plt_latest.rcp is: • (1/20000)×(32/23) = 0.0000694 • Change would increase the ICD energy reconstructed by 35%! • Current Reco version on farms is p10.15.01 • caltables: plt_latest.rcp  tag p10-15-01 Alan L. Stone Louisiana Tech University

  4. What do we see in cal_examine for ICD? Current version is t02.08.00 Took zero bias run, in normal, unsuppressed mode. North South Average pedestal is 600 ADC counts Vertical axis is ET in GeV. Alan L. Stone Louisiana Tech University

  5. What do we see in cal_examine for MG? North Average pedestal is 600 ADC counts Vertical axis is ET in GeV. Alan L. Stone Louisiana Tech University

  6. And neighboring CAL layers… North Average pedestal is 600 ADC counts Vertical axis is ET in GeV. Alan L. Stone Louisiana Tech University

  7. Address Changes in Software • caladdress: CalChan.cpp  tag p11-05-00 • Correction to ICD fiber backplane miscabling not tagged for production release • Eta is swapped (1214) for the NE & SW quadrants • Code fix made between 8-18 March 2002 • However, we wanted to do test online with cal_examine (online version t02.08.00) • 4 March: Call for release requests for t02.08.00 • No caladdress in builds 1-4 • 11 March: Call for release requests for t02.09.00 • caladdress went from v00-03-06 to v00-03-07 • 18 March: Call for release requests for t02.10.00 • caladdress went from v00-03-07 to v00-03-08 • This is the last tagged version by Bob Kehoe ? Alan L. Stone Louisiana Tech University

  8. New Address Feature • New problem was found a few weeks ago • We looked at sets of 3 ICD channels from each CAL crate in which the ICD is readout • Crates 40,41,44,45,46,47,4A,4B • Turned off all HV except for these 24 channels • Took “snapshot” of output in ADC counts & transverse energy in GeV • Then lowered HV for 1 in each 3 channels by 50 V • All channels in West appear phi swapped in output of cal_examine (but not in cal_elec) • Sent email to Bob Kehoe – not sure if this is a bug in caladdress, or if the problem is internal to the online version of cal_examine Alan L. Stone Louisiana Tech University

  9. Turned on ICD LED pulser. Turned off all HV except for channels shown. Reduced by 50V for a single channel in each group of three (each Calorimeter readout crate in which the ICD resides). Referenced ICD channel map. cal_elec is correct. Before After Alan L. Stone Louisiana Tech University

  10. Before CAL crate 1 (ICD NW12) & CAL crate 11 (ICD NE16) cal_examine gives correctly  = 15. After cal_examine gives incorrectly  = 26 Should be 25. Alan L. Stone Louisiana Tech University

  11. Other Issues That Need Attention • Isolated muons tracked through ICD • Verify MIP response in ADC counts • Channel to channel correction • SCA non-linearity effects • Small contributions from ICD tiles to jets • Calorimeter geometry • ICDmodule.hpp/cpp last modified 9 Aug 2000 • Has anyone independently checked on this? • D0scan – different color scheme for ICD • George Alverson is currently working on this Alan L. Stone Louisiana Tech University

  12. Summary • ICD electronic output is working well • cal_elec addressing is as expected • Verified with LED pulser • Only a handful of weak or dead channels • New PMTs are on hand & being tested • New motherboards are also at D0 • We need to wait for major shutdown to get time & access to the East/West platforms • ICD response is at the mercy of the software • We need to get into p11 right away: • Corrected addressing • Corrected ADC to GeV conversion All but one in the North Alan L. Stone Louisiana Tech University

More Related