1 / 35

Timber Research Centre

16394 & 16469 Group A. Timber Research Centre. Michael Anderson– Mohamed Farid Pablo Prallong – Lewis Macleod Ross Turbet. 4 th Presentation. 26/04/2005. Presentation Agenda. Introduction to Project Building Description Demands Demand Side Management Techniques

Download Presentation

Timber Research Centre

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. 16394 & 16469 Group A Timber Research Centre Michael Anderson– Mohamed Farid Pablo Prallong – Lewis Macleod Ross Turbet 4th Presentation 26/04/2005

  2. Presentation Agenda • Introduction to Project • Building Description • Demands • Demand Side Management Techniques • ESP-R – Design Changes • Homer • Control • Supply • Conclusion

  3. Our Aim • Use Demand Side Management to facilitate the embedding renewable energy to a Timber research centre • Apply design changes to match building energy demands with renewable supply. • Show results through simulation and website.

  4. Review of the building • Timber Research Centre • Up to 80 occupants • Situated in outskirts of Glasgow • Typical of offices (loads) across Central Scotland (weather)

  5. Building Demands • Heating • Space heating • Hot water • Electrical • Lighting • Ventilation • Machinery • Other appliances

  6. Heating Demands Electrical Demands Calculating Demands Esp-r Model

  7. Seasonal Demands • Heating demands

  8. Seasonal Demands • Electrical Demands

  9. Demand Side Management. • Strategies utilised throughout the project. • Peak clipping • Valley filling • Load shifting • Design changes made in order to implement these strategies. • How these changes have affected the demands of our design.

  10. Design changes 1.Peak clipping To help lower the demand, we looked to significantly reduce the loads in the building • Natural lighting. • Natural heating. • Energy reduction in cafeteria.

  11. Design changes 2.Valley filling The goal is to build up off-peak loads in order to smooth out the load and improve the economic efficiency of the building. • Heating slowly turned on in the morning before occupancy • Heating during the weekends.

  12. Design changes 3.Load shifting The idea behind load shifting is to move the times of peak energy usage to times where there is a excess of electricity. • Stagger times at which occupants enter the building. • Change designated break times throughout the day.

  13. Effects of changes. • Lower demand peaks in spaces, both in terms of heating and lighting. • Smoothened demand curve • Better options and feasibility for supply matching.

  14. Design changes

  15. U-Value • External wall properties • Weatherboard: 100mm • Glasswool: 75 • Air Gap: 50 • Breezeblock: 100 • Overall U-Value = 0.39W/m2K

  16. External Wall Construction • New Wall Properties • Weatherboard: 100mm • Glasswool: 200 • Air Gap: 50 • Breezeblock: 100 • Overall U-Value = 0.16W/m2K

  17. Daylight • Utilising as much daylight as possible

  18. Daylight • Careful to avoid glare & unwanted heat gains

  19. Heating control • Continuous heating… • Pre-Heat 0000 – 0700 (12DegC) • Basic Control 0700 -1600 (26DegC) • Pre-Heat 1600 – 0000 (12DegC)

  20. Seasonal Demands • Typical winter

  21. Seasonal Demands • Typical spring

  22. Seasonal Demands • Typical summer

  23. Automatic Control System • Sensors • Computer Network • Controlling each room separately

  24. Flow charts

  25. Lighting Control

  26. Supply • Wind Energy 30KW • PV Solar 40KW • Generator 50 KW • Battery x 10 • Nominal Voltage 4V • Nominal Capacity 7.6 KWh

  27. Matching Methods

  28. Component Production Fraction (kWh/yr) • PV array 63,462 27% • Wind turbine 57,946 25% • Generator 1112,359 48% • Total 233,766 100%

  29. Annual electric energy consumption • Total Electrical Demand 173,310 kWh/yr • Excess electricity:60,456kWh/yr

  30. Emissions without Renewable (kg/yr) • Carbon dioxide 260,993 • Carbon monoxide 644 • Unburned hydrocarbons 71.4 • Particulate matter 48.6 • Sulfur dioxide 524 • Nitrogen oxides 5,748

  31. Emissions after embedding Renewables Emissions down by approx 50% (kg/yr) • Carbon dioxide 136,379 • Carbon monoxide 337 • Unburned hydrocarbons 37.3 • Particulate matter 25.4 • Sulfur dioxide 274 • Nitrogen oxides 3,004

  32. Assumptions • Wind and Solar Data are estimated for urban areas (lack of information available) • Cost is not taken in consideration • Demands are assumed to be of a typical office

  33. Conclusion • Heating demands has been reduced by approx 20% • Electrical demands has been reduced by 10% • Embedding Renewable generation reduced emissions by more than 50 %

  34. Thank you for your attention Any Questions?

  35. Crit 4 (Final Presentation) Your team should be reporting the outcomes from the year's investigation. These should include a • summary of how and where energy savings have been achieved, • an assessment of  the improvements to building performance, • reduction in plant capacity and the reduced  environmental impact achieved by adopting the plant and control procedures used.

More Related