1 / 18

Reliable Electrochemical Energy Storage for Alternative Energy

2500 m m. Reliable Electrochemical Energy Storage for Alternative Energy. Craig B. Arnold Department of Mechanical and Aerospace Engineering Princeton Institute for Science and Technology of Materials Princeton University. Introduction.

cherie
Download Presentation

Reliable Electrochemical Energy Storage for Alternative Energy

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. 2500 mm Reliable Electrochemical Energy Storage for Alternative Energy Craig B. Arnold Department of Mechanical and Aerospace Engineering Princeton Institute for Science and Technology of Materials Princeton University

  2. Introduction We don’t necessarily generate power where or when we need it • Alternative energy, non-constant energy generation  solar, wind load leveling • Excess energy is needed to meet an unexpected demand ramping • Energy demand requires greater regulation of characteristics  frequency regulation • Energy needs to be portable transportation, small applications • Novel systems require novel solutions Flexible, long life, lightweight, fast recharge, etc. Energy storage is one of the key challenges we face in the 21st century

  3. Why is this a problem? Why can’t we just invent a giant energy storage device to solve the storage problem? • Maximum power capabilities • Maximum energy storage capabilities • Insensitive to charging/discharging parameters • Instant response • No internal impedance • Long life without degradation of properties • Portable • Lightweight • Small footprint/Volume Magic Storage Device would have: Obviously we cannot get all of these things in a single device But we can make tradeoffs to optimize performance for a given application and we can continue to make innovative breakthroughs

  4. Project Outline • Assessing and optimizing the integration of hybrid energy storage with alternative energy • Improving lifetime and capacity fade in secondary batteries through improved mechanics

  5. e- e- e- e- e- e- Primary: Non-rechargeable Secondary: rechargeable Anode Current Collectors Electrolyte/Separator Voltage Potential difference between anode and cathode. Related to energy of reactions Cathode Capacity amount of charge stored (usually given per unit mass or volume) Anode (Oxidation): Zn + 2 OH- Zn(OH)2 + 2e- E = 1.25 V Cathode (Reduction): Ag2O + H2O + 2e-  2 Ag + 2 OH- E = 0.34 V Electrochemical Energy Storage Batteries are a compact method of converting chemical energy into electrical energy Other methods, fuel cell, photovoltaic cell, electrochemical capacitors etc. C-rate  charging/discharging rate, 1C is current needed to discharge in 1 hour All work the same, but the details are different

  6. http://www.powerstream.comz/ragone.gif Battery Limitations Electrochemical energy storage such as batteries or supercapacitors provide unique properties for the energy storage portfolio but they have some limitations E.g. Ragone Relation Specific power increases  specific energy decreases Corollaries: • capacity is lower at higher discharge/charging rates • Some systems charge fast some slow • Each system has a sweet-spot for energy/power capacity But, different battery chemistries and technologies have different characteristic regimes

  7. Case Study: Wind Power P. Denholm, G. L. Kulcinski, and T. Holloway, "Emissions and energy efficiency assessment of baseload wind energy systems," Environmental Science and Technology, vol. 39, pp. 1903-1911, 2005. Fluctuations occur over many different time periods

  8. What to do about it Our approach to this challenge is to integrate and optimize multiple types of energy storage devices into a single system  Hybrid Energy Storage System We can try to match a combination of batteries to the fluctuating system where each battery is optimized for a particular time scale Assessment • Assess existing battery technology for charge storage efficiency as a function of rate and state of charge • Using laboratory scale wind turbine, test different batteries under simulated wind spectrum • Design circuitry/systems to incorporate multiple types of batteries in a single system Optimization(work done in collaboration with W. Powell, ORFE) Given the random fluctuations, and performance metrics, develop models to determine when and how to charge/discharge the system for optimal performance

  9. e- e- e- e- e- e- Li+ Li+ Li+ Li+ Li+ Li+ e- e- e- e- e- e- Li+ Li+ Li+ Li+ Li+ Li+ Improving Cycle Life and Capacity Fade Common misunderstanding  Most failure in batteries happens because of mechanics Clearly this is true for flexible but also fixed Discharge: Li1-xCoO2+xe-+xLi+→LiCoO2 In Lithium Batteries, the ions have to ‘intercalate’ into the host lattice Understanding relation between mechanics and electrochemistry  improved Lifetime and lower fade Very large strains can be achieved > 7% ! Cathode Material

  10. Fatigue Stress Strain Cycle life Energy density Power density www.powerstream.com Mechanical Properties In real battery systems, applied stresses can be quite large • Traditional batteries also subject to applied compressive stresses • Flexible batteries →tensile, compressive, and bending stresses Compression testing of batteries will advance understanding of electrochemical/mechanical interaction

  11. Mechanics As the batteries are charged and discharged, they expand and contract T. Chin et. al., Electrochem. Sol. State Lett. (2006) But more importantly, the properties change in time as the internal materials change in response to the forces

  12. Fully Discharged (3.0V) Partially Charged (3.5V) h1 Fully Charged (4.1V) E h2 s Creep Behavior • Static load testing confirms viscous flow behavior • Application of a 3 parameter model provides information about elastic and viscosity parameters The 3 parameter model for viscoelastic polymer behavior accurately describes the strain response of the battery

  13. Conductivity Measurements Does the effect of Creep make any difference? Compressed systems show a decrease in conductivity  Increased internal resistance, capacity fade

  14. Why? The pores begin to close in samples that have experienced creep

  15. Conclusions • Assessment and Optimization of hybrid systems can provide a pathway for electrochemical energy storage in alternative energy applications • By studying the mechanics of the electrochemical systems, we can understand limitations to capacity and cycle life and develop pathways to improvement

  16. Acknowledgement Matt Brown Nick Kattamis Elena Kreiger Christina Peabody Guodan Wei Ashwin Atre Paul Rosa Jonathan Scholl Karl Suabedissan

  17. Research Projects • Relation between mechanical and electrochemical properties • Fabrication and design of flexible platforms • Fabrication and design of microbatteries • Advanced laser processing and embedding of microbatteries Batteries Small, Long lasting, Advanced applications • Optimizing nanoscale architecture for optimized capacity • Laser modification of nanoscale materials for improved performance • Advanced laser methods of fabricating small scale supercapacitors Supercapacitors Control of nanoscale structures, High power, Novel applications Integration/Systems How to integrate storage with alternative energy Hybrid systems for small scale applications

  18. SEM II Similar result in other Celgard materials

More Related