1 / 8

RADIATION PROTECTION IN DIAGNOSTIC AND INTERVENTIONAL RADIOLOGY

IAEA Training Material on Radiation Protection in Diagnostic and Interventional Radiology. RADIATION PROTECTION IN DIAGNOSTIC AND INTERVENTIONAL RADIOLOGY. Part 16.6: Optimization of protection in fluoroscopy Practical exercise. Overview.

cece
Download Presentation

RADIATION PROTECTION IN DIAGNOSTIC AND INTERVENTIONAL RADIOLOGY

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. IAEA Training Material on Radiation Protection in Diagnostic and Interventional Radiology RADIATION PROTECTION INDIAGNOSTIC ANDINTERVENTIONAL RADIOLOGY Part 16.6: Optimization of protection in fluoroscopy Practical exercise

  2. Overview • To become familiar with quality control tests in fluoroscopy. • To assess the video monitor performance • Interpretation of results 16.6: Optimization of protection in fluoroscopy

  3. IAEA Training Material on Radiation Protection in Diagnostic and Interventional Radiology Part 16.6: Optimization of protection in fluoroscopy Video Monitor performance

  4. Fluoroscopy - TV monitor performance Purpose : • To check and set up the TV monitor of the fluoroscopy system under normal automatic brightness control Equipment : • Image quality phantom (Leeds phantom) 16.6: Optimization of protection in fluoroscopy

  5. TV monitor setup • Very important element of the fluoroscopy imaging chain: monitor with the brightness set low can cause a high dose rate to be used • Need to see the circle inside the square at both high and low contrast • Fluoro the test pattern under normal automatic control and adjust the monitor appropriately 16.6: Optimization of protection in fluoroscopy

  6. TV monitor Setup • Adjust brightness • contrast controls: - optimise black and white circles in squares - full grey scale should be visible • Leave TV controls unchanged for remaining tests Image from: http://www.leedstestobjects.com/modules/products/product_setup/file_library/SFS%20SET%20product%20specifications.pdf 16.6: Optimization of protection in fluoroscopy

  7. Leeds Fluoroscopy Phantoms Adjustment of the display monitor Incorporates: • a ten-step wedge with transmission from zero to 0.9 of peak white • two discs of unity and zero X-Ray transmission within squares of transmissions 0.9 and 0.08 • a lead circle Image from: http://www.leedstestobjects.com/modules/products/product_setup/file_library/SFS%20SET%20product%20specifications.pdf 16.6: Optimization of protection in fluoroscopy

  8. Where to Get More Information Quality Control in Diagnostic Imaging, Gray JE, Winkler NT, Stears J, Frank ED. Available at no cost. http://www.diquad.com/QC%20Book.html 15.3: Optimization of protection in radiography

More Related