1 / 18

Class I Well Operation, Maintenance, and Reporting Requirements May 7, 2014

Class I Well Operation, Maintenance, and Reporting Requirements May 7, 2014. Rich Heitzenrater/Elizabeth Murphey UIC Inspection and Compliance Team TCEQ Region 14 Corpus Christi (361) 825-3119 (361) 825-3128. Operational Problems.

brosh
Download Presentation

Class I Well Operation, Maintenance, and Reporting Requirements May 7, 2014

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Class I Well Operation, Maintenance, and Reporting RequirementsMay 7, 2014 Rich Heitzenrater/Elizabeth Murphey UIC Inspection and Compliance Team TCEQ Region 14 Corpus Christi (361) 825-3119 (361) 825-3128

  2. Operational Problems • Any problems that could potentially affect the mechanical integrity of the well or reported data should be explained on the operating reporting forms. • Malfunctions of equipment • Faulty gauges (recalibrated or replaced) • Power outages

  3. Annulus Differential Pressure • Differential Pressure must be maintained at a minimum of 100 psi at all times • If it falls below 100 psi for more than 15 minutes the well must be shut in and TCEQ must be notified. • Any instances when this occurred should be noted and explained on reporting forms even if they did not exceed 15 minutes.

  4. Maintenance Issues • Maintenance is scheduled not reactionary. • If well maintenance would require exceedances in permit parameters (i.e. annulus differential) or the well to be disassembled (replacing seals or piping) prior approval by TCEQ is required. • Submit plans prior to work • May help avoid violations

  5. MIT Issues • Flow rates during stationary RAT surveys should be as close as possible to the normal operating average flow rate. • If any anomalies are seen during a stationary survey, a repeat survey should be run. We would like to see two clean runs for each well’s RAT survey. • Any anomalies on any of the logs should be fully explained in the report. • Extension requests for MIT deadlines must be made prior to the MIT anniversary date. There should be no more than 15 months nor less than 9 months between routine MITs.

  6. Workover Issues • Remedial workovers for wells that fail mechanical integrity tests • Should be performed as soon as possible. • A timeline should be submitted to show when the workover should be completed and when the well is expected to return to operation. • When planning a workover it may be necessary to make modifications or amendments to the well’s permit. These will be need before work can begin. • Some workovers on hazardous waste disposal wells may require modifications to the “No Migration” petition issued by USEPA

  7. Workover Issues • A well can’t be temporarily abandoned when it lacks mechanical integrity. • Acid stimulations and Coil tubing clean outs are not considered workovers. They should be reported on page 2 of the operating reporting forms. • Written approval from TCEQ is required to resume well operations.

  8. Quarterly and Monthly Reporting Forms • Quarterly Forms should be submitted within 20 days after the last day of the months of March, June, September, and December • Monthly forms shall be submitted within 30 days after the last day of each month

  9. Quarterly and Monthly Reporting Forms • Exceedences • Need to be marked on page 1, page 2-D, and then explained on page 2-F • Calculation of Average Flow Rate • (total volume / # of hours operated) / 60 • Annulus Fluid Usage • 40 CFR 146.69(a)(5) • Report net amount of fluid added to the annulus for each month.

  10. Reporting Issues • Reports should include a dated cover letter. (Who prepared it and when was it submitted) • All MIT reports, Workover reports, and Workover procedures should be submitted with a PE or PG stamp. • All reports must be submitted within 30 days of the completion of work. Any requests for extensions must be submitted prior to the due date of the report. • Annual Injection Zone Reports should follow the guidance document dated September 16, 2009.

  11. UIC 2014 Mailing List Austin (Permits) • Applications for Minor Mods or Amendments • Permit Corrections • Permit Revocations • Reports and Correspondence Concerning Well Construction or Plugging

  12. UIC 2014 Mailing List Austin (Permits Administrative Review Section) • Applications for UIC Permits • New Permits • Renewals • Major Amendments

  13. UIC 2014 Mailing List Austin (Critical Infrastructure Division) • Annual Reports • MIT Reports • Workover Reports

  14. UIC 2014 Mailing List TCEQ Regional Offices • MIT Procedures • Workover Procedures • Monthly & Quarterly Operating Reports • Annual Reports, MIT Reports, Workover Reports • Any other non-permitting related UIC correspondence

  15. UIC Field Operations Staff Region 14 Rich Heitzenrater Richard.Heitzenrater@tceq.texas.gov (361) 825-3119 Elizabeth Murphey Elizabeth.Murphey@tceq.texas.gov (361) 825-3128

  16. UIC Field Operations Staff Region 1 David Durst David.Durst@tceq.texas.gov (806) 468-0535

More Related