110 likes | 235 Views
How to Hang A Door By James Hunter. By James Hunter. Key Features to Know. Removal of Old Door. Step 1 – Remove Trim from inside Step 2 – Measure opening to insure new door will fit. Step 3 – Remove outside trim Step 4 – Take the door off the hinges.
E N D
How to Hang A Door By James Hunter By James Hunter
Removal of Old Door Step 1 – Remove Trim from inside Step 2 – Measure opening to insure new door will fit. Step 3 – Remove outside trim Step 4 – Take the door off the hinges
Removal (cont.) Step 5 – Cut Away all nails/screws holding the door Step 6 – Remove the Casing • Video
Installation Step 1 – Determine if the door will be at the proper height with respect to the finished floor Step 2 – Install water proofing flashing Step 3 – Set the new door in place Step 4 – Use shims on both sides near the top and bottom to level the door
Installation (cont.) Step 5 – Check the reveal to ensure door is level Step 6 – Drive nails on the outside of the door casing where the shims are located • Video
How to Insulate A New Door Step 1 – Fill gap between door casing and the stud with spray foam insulation Step 2 – Trim excess foam insulation Step 3 – Seal door jamb and door casing with water proof flashing
Insulation (cont.) Step 4 – Install Fiberglass Insulation Step 5 – Install water proof flashing around the door casing/door jamb on the inside • Video
Trim New Door Step 1 – Measure inside width of door casing and add ½ inch Step 2 – Measure trim and cut with a miter saw Step 3 – Install top trim with nails/nail gun Step 4 – Measure for side trim to the top side of the top trim piece
Trim (cont.) Step 5 – Mark and cut side pieces Step 6 – Glue Corners and the install with nails/nail gun • Video
More Help • http://www.familyhandyman.com/DIY-Projects/Doors---Windows/Door-Installation/how-to-hang-a-door • http://www.wikihow.com/Hang-a-Door