1 / 16

Toward tip-enhanced Raman spectroscopy at the solid/liquid interface

Toward tip-enhanced Raman spectroscopy at the solid/liquid interface. Katrin F. Domke, Bruno Pettinger Fritz Haber Institute of the Max Planck Society Department of Physical Chemistry Berlin, Germany. STM and Raman …. … and potential control. TERSSLi at potential-controlled surfaces. 1.

Download Presentation

Toward tip-enhanced Raman spectroscopy at the solid/liquid interface

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Toward tip-enhanced Raman spectroscopy at the solid/liquid interface Katrin F. Domke, Bruno Pettinger Fritz Haber Institute of the Max Planck Society Department of Physical Chemistry Berlin, Germany

  2. STM and Raman …

  3. … and potential control

  4. TERSSLi at potential-controlled surfaces 1 physisorbed phase -2 0 chemisorbed cm phase mA * * j / -1 -2 -1.2 -0.8 -0.4 0.0 0.4 + E / V vs. Ag/Ag adenine open circuit: -0.08 V Cyclic voltammogram provided by Constanze Donner, Free University Berlin.

  5. TERSSLi at potential-controlled surfaces adenine controlled potential ? Cyclic voltammogram provided by Constanze Donner, Free University Berlin.

  6. FHI experimental set-up working in air

  7. Problem with old set-up + modified EC-STM TERS refractive indices air: 1 glass: 1.5 water: 1.33 focus too big, no signal correction? glasses don‘t fit, no room

  8. Parabolic-mirror approach STM tip, insulated for EC measurements sample parabolic mirror 4 mm CE RE 16 mm in: excitation laser beam out: scattered light • electrode potential control

  9. Optical path STM head parabolic mirror glass plate beam expander spectrometer fibre out (multimode) HeNe laser fibre in (633 nm)

  10. TERSSLi set-up Technical support: Klaus Grabitz

  11. New STM head 500 x 500 nm2 200 x 200 nm2 Pt(111) bead crystal 2 mm diameter crystals prepared by Juan M. Feliu, Alicante, Spain

  12. Si signal in air/water (for comparison: 10 000 cts/s with old setup)

  13. Tip coating I

  14. Tip coating I

  15. Tip coating II

  16. To come … 50 x 50 nm2 25 x 25 nm2 Metal organyls: Co(II) porphyrines/toluene at Au(111) flat, well-ordered? nanocrystal? nice focus??

More Related