1 / 6

Wireless Access

Wireless Access. avoid collisions: 2 + nodes transmitting at same time CSMA - sense before transmitting don’t collide with ongoing transmission by other node no collision detection! difficult to receive (sense collisions) when transmitting (what you hear is not he hear)

berick
Download Presentation

Wireless Access

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Wireless Access • avoid collisions: 2+ nodes transmitting at same time • CSMA - sense before transmitting • don’t collide with ongoing transmission by other node • no collision detection! • difficult to receive (sense collisions) when transmitting (what you hear is not he hear) • can’t sense all collisions in any case: hidden terminal, fading • The next best thing to do: avoid collisions CSMA/C(ollision)A(voidance)

  2. RTS(B) RTS(A) reservation collision RTS(A) CTS(A) CTS(A) DATA (A) ACK(A) ACK(A) Collision Avoidance: RTS-CTS exchange A B AP defer time

  3. 802.11b 2.4-5 GHz unlicensed radio spectrum up to 11 Mbps direct sequence spread spectrum (DSSS) in physical layer widely deployed, using base stations 802.11a 5-6 GHz range up to 54 Mbps 802.11g 2.4-5 GHz range up to 54 Mbps All use CSMA/CA for multiple access Base-station and ad-hoc network versions IEEE 802.11 Wireless LAN

  4. AP AP Internet 802.11 LAN architecture • wireless host communicates with base station • base station (BS) = access point (AP) switch or router BSS 1 BSS 2

  5. 802.11 Operating Modes • DCF: Distributed Coordination Function • aka Ad-hoc mode • CSMA/CA • RTS/CTS signaling • Two stations can communicate • All stations have the same logic • No infrastructure, Suitable for small area • PCF: Point Coordination Function • Infrastructure Based: • Must have a base station (or access point) • BS periodically broadcast a beacon • MS can only transmit when it is being polled

  6. 802.11 Channels • 802.11b: Use 11 channels at different frequencies • AP admin select operating frequency for AP • interference possible: channel can be same as that chosen by neighboring AP! • Planning: decide which AP use which channels to provide good coverage. • host: must associate with an AP • scans channels, listening for beacon frames containing AP’s name (SSID) and MAC address • selects AP to associate with • may perform authentication • will typically run DHCP to get IP address in AP’s subnet

More Related