1 / 11

Autodesk Inventor: Part 3 Creating a Drawing

Autodesk Inventor: Part 3 Creating a Drawing Once a part has been finalized and fitted into the assembly, a Drawing needs to be made, so a diagram of the part can be printed to show how the part should be made. PowerPoint by: Danica Chang Creating a Drawing Press new

benjamin
Download Presentation

Autodesk Inventor: Part 3 Creating a Drawing

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Autodesk Inventor: Part 3Creating a Drawing Once a part has been finalized and fitted into the assembly, a Drawing needs to be made, so a diagram of the part can be printed to show how the part should be made. PowerPoint by: Danica Chang

  2. Creating a Drawing • Press new • Open a new Standard.idw, then press OK

  3. Formatting • Under model, in the lower left part of the screen, right-click “Sheet:1” • Then press “Edit Sheet…” • Change size to A, then press OK • Next, delete by right-clicking and pressing delete

  4. Insert Component Find component • Right-click “Sheet:1” again, and press “Base View…” • Find the component you want to make a drawing of. • Pick a scale that will allow the entire part to fit on the page • Then, press OK Pick an appropriate scale

  5. Projected View • Press on the upper left menu, then press your component. • Next move your mouse to where you want a different orientation of the part to be shown, and click. • Repeat for as many sides as necessary. • Then, right-click and press create

  6. Centerline Make sure both are pressed • If you have holes in your part, you need to draw centerlines • Right-click on each view and press “Automated centerlines…” • After changing the centerline settings, press OK Precision should be to 3 decimal places

  7. Baseline Dimensions • Press on the top left and switch to • Press This tool allows you to display the dimensions of the part, measuring from one side.

  8. Baseline Dimensions • First click on a side you want to measure everything else from (an outer edge) • Then click on all the features you wish to measure from that edge. • Right-click and press continue • The dimensions should show up and simply left-click to designate where it should be placed

  9. Hole Dimensions • Next use to label the dimensions of the holes. • Make sure the tolerance is to 3 decimal places

  10. Description • Finally, add a description, which should include: • The name of the designer • Description of the part • Material • Tolerance • Quantity • Any other notes

  11. Your final drawing should look like this:

More Related