President : Dr. Ing. Konrad Friedrichs

1. Highlysophisticatedcarbidefordrillingandmilling in theautomotiveindustryandcuttingapplicationsfordifficult-to-cutmaterials.

2. President: Dr. Ing. Konrad Friedrichs long tradition of high quality heavy expenditures in R&D development of modern manufacturing procedures • rods in diameter ranges from Ø 1 mm to Ø 16 mm and flat bars in various carbide grades • high performance carbide of outstanding quality

3. extended shop floor for additional state-of-the-art sintering furnaces

4. modern kneading machines and extruders

5. innovative work places for quality control department

6. KFM 88,5 % coarse tungsten carbide and 11,5 % of cobalt G20 flat bars high toughness and impact strength to chip cross-sections, interrupted cutting, and varying cutting depths, cast iron, annealed cast iron, steel, paper knifes and wood 1.5 mm x 2.2 mm – 16,6 mm x 3,5 mm / variable length

7. KFM 94 % ultrafine tungsten carbide and 6 % of cobalt 606 high hardness, crack and chip resistance, process stability caused by constant wear of cutting edges drilling PCB-applications in bigger dimensions of 0.25 mm – 0.5 mm ø1.2 – ø1.5 mm / variable length up to 400 mm

8. KFM 92 % superfine tungsten carbide and 8 % of cobalt 308 high wear resistance combined with high service life of very sharp cutting edges critical materials like fiber reinforced materials, ceramic glass, dental ceramics and advanced alloys ø1.2 – ø1.5 mm / variable length up to 400 mm

9. KFM 90 % ultrafine tungsten carbide and 10 % of cobalt 40 High process stability for standard applications corrosion and heat resistant steels, stainless steels, non ferrous metals and plastics ø 1.7 – ø 16,2 mm / variable length up to 400 mm

10. KFM 88 % ultrafine tungsten carbide and 12 % of cobalt 44 high hardness coupled with high transverse rupture strength corrosion and heat resistant steels, stainless steels, titanium alloys, non ferrous metals ø 1.7 – ø 16,2 mm / variable length up to 400 mm

11. KFM 93 % ultrafine tungsten carbide and 7 % of cobalt 47 high toughness, high wear resistance and a long lifetime of very sharp cutting edges especially favored for router applications ø 1.7 – ø 16,2 mm / variable length up to 400 mm

12. KFM 91 % ultrafine tungsten carbide and 9 % of cobalt 39 high toughness, sharp cutting edges, high wear resistance grey cast iron, hardened steels, unalloyed steels, aluminum alloys, plastics and fiber reinforced materials ø 1.7 – ø 16,2 mm / variable length up to 400 mm

13. KFM 94 % ultrafine tungsten carbide and 6 % of cobalt 66 high hardness, crack and chip resistance, process stability caused by constant wear of cutting edges grey cast iron, unalloyed steels, plastics and for diamond coating ø 1.7 – ø 16,2 mm / variable length up to 400 mm

14. KFM 92 % ultrafine tungsten carbide and 8 % of cobalt 38 very sharp cutting edges and high wear resistance critical materials like fiber reinforced materials, ceramic glass, dental ceramics and advanced alloys ø 1.7 – ø 16,2 mm / variable length up to 400 mm

15. KFM 92 % ultrafine tungsten carbide and 8 % of cobalt 38 improved bending strength up to 4000 N/ mm² longerservicelife

16. KFM 92 % ultrafine tungsten carbide and 8 % of cobalt 38 hardness up to 2000 HV30 substantial higher wear resistance

17. March 2014 Konrad Micro Drill Passion for Quality

18. Internet: www.konradmicrodrill.de Email: service@konradmicrodrill.de Konrad Micro Drill Kulmbach, Bavaria Germany Tel.: +49 9221 878023-0 Fax: +49 9221 878023-23