1 / 27

M. Apollonio IC - London

beam line optics. M. Apollonio IC - London. layout. beam line status: estimated proton flux from measurements rates from GVA1/GVA2 analysis (reminder) optics availability sw availability hw main issues [solenoid/diffuser] conclusions & future plans reduced rate and actions

Download Presentation

M. Apollonio IC - London

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. beam line optics M. Apollonio IC - London MICE CM22 - 20/10/2008 - RAL

  2. layout beam line status: • estimated proton flux from measurements • rates from GVA1/GVA2 analysis (reminder) • optics availability • sw availability • hw main issues [solenoid/diffuser] conclusions & future plans • reduced rate and actions • matching MICE MICE CM22 - 20/10/2008 - RAL

  3. Beam Features Beamline Production Optics Diffuser SW/HW issues Conclusions • reminder on desired features • Pm = [140 MeV/c, 240 MeV/c], Dp/p = +/- 10% • easily tunable • matched emittance: • 1 mm rad < eN < 10 mm rad deliverable to MICE • high purity muon beam • high rate “600 muons” per target actuation • [1 Hz, 1 ms window] • acceptable losses for ISIS MICE CM22 - 20/10/2008 - RAL

  4. 1 2 3 4 Beam Features Beamline Production Optics Diffuser SW/HW issues Conclusions p production/capture MICE: p – m decay beam line beam line constituted by 4 parts p decay m transport match to MICE MICE CM22 - 20/10/2008 - RAL

  5. Beam FeaturesBeamline Production Optics Diffuser SW/HW issues Conclusions target working principle • titanium blade dipping at 1 Hz in the ISIS proton beam • intercept just ~1ms of ISIS accelerated beam • withdrawal must be quick to avoid scraping next filling •  extreme accelerations (80g) • beam loss must comply with ISIS requirements [P. Hodgson, CM22 19/10/08] 1 ms 10 ms 20 ms MICE CM22 - 20/10/2008 - RAL

  6. Beam FeaturesBeamline Production Optics Diffuser SW/HW issues Conclusions some key questions: • how many protons per spill are we generating? and then pions/muons? • rate in april/may with a D1-D2 line for protons • how much beam can we “shave” before “disturbing” ISIS operations • [K.Long, CM22 19/10/08]? • initial simulation of ISIS beam with ORBIT and comparison with signals from BLMs • [A. Dobbs, CM22 19/10/08] • how well we understand the line? • alignment • magnets MICE CM22 - 20/10/2008 - RAL

  7. Beam FeaturesBeamline Production Optics Diffuser SW/HW issues Conclusions MICE beamline: magnet configuration and detector locations (march/april) ID1=400 A  PD1=480 MeV/c D1 Dp~30 MeV/c BM2:>29/3 IC2: >29/3 D2 BM1: >29/3 ID2=170 A  PD2=450 MeV/c GVA1: > 4/4 GVA2: > 29/3 MICE CM22 - 20/10/2008 - RAL

  8. Beam FeaturesBeamline Production Optics Diffuser SW/HW issues Conclusions • proton rate @ target • target @ 50/128 Hz • 2ms acq. gate • GVA1/2 active for 100 s • R8BLM1 signal ~ 50 mV • GVA1=14 p/dip(1ms), GVA2= 4p/dip(ms) • it corresponds to 2.6E9 (+/-1.3E9) PoT (G4Beamline) x500 less MICE CM22 - 20/10/2008 - RAL

  9. HEP Test Beam target: 200 mV beam loss at 50 Hz Corresponds to ‘loss’ of: 2.4 × 109 protons per dip 1.2 × 1011 protons per sec Beam FeaturesBeamline Production Optics Diffuser SW/HW issues Conclusions [K.Long] Scaled beam loss: • MICE target • Beam loss: • Corresponding to ‘loss’ of 1.2 × 1011 protons per sec • … i.e. per dip (at 1 Hz) is 2 V i.e. 2000 mV MICE CM22 - 20/10/2008 - RAL 600 good μ/spill from 1.7 × 1012 protons

  10. Beam FeaturesBeamline Production Optics Diffuser SW/HW issues Conclusions [K.Long] Conclusions: • Goal: • Increase particle rate in MICE Muon Beam • HEP Test Beam target: • Indicates that to achieve desired rate may require upgrade to collimation system • Radiation surveys: • To date: • No evidence for dose in DSA or MICE Hall • No evidence for activation of ISIS • Tools for the understanding of beam loss and particle rate • In place … • … but, improvements still required (e.g. r/o BPM) MICE CM22 - 20/10/2008 - RAL

  11. Beam FeaturesBeamline Production Optics Diffuser SW/HW issues Conclusions [A. Dobbs] ISIS Beam MICE CM22 - 20/10/2008 - RAL

  12. Beam FeaturesBeamline Production Optics Diffuser SW/HW issues Conclusions [A. Dobbs] MICE CM22 - 20/10/2008 - RAL

  13. Beam FeaturesBeamline Production Optics Diffuser SW/HW issues Conclusions [A. Dobbs] MICE CM22 - 20/10/2008 - RAL

  14. Beam FeaturesBeamline Production Optics Diffuser SW/HW issues Conclusions Comparing G4Beamline to DATA (june): see how well we understand the Q-poles count rates: G4beamline predictions vs measurements june 2nd june 3rd MC / meas: discrepancy x2 MICE CM22 - 20/10/2008 - RAL

  15. Beam FeaturesBeamline Production Optics Diffuser SW/HW issues Conclusions Comparing G4Beamline to DATA (june) 306 72 GVA1/GVA2= 4.25 MC CASE1 D=6.3% DATA 2230 560 GVA1/GVA2= 3.98 2021 (x6.60) 833(x11.57) GVA1/GVA2= 2.42 D=-29% CASE2 8159 (x3.65) 2603 (x4.66) GVA1/GVA2= 3.13 2016 (x6.60) 1297 (x18. / x1.56) GVA1/GVA2= 0.64 CASE3 D=11% 8945 (x4.01) 5077 (x9.07/ x1.95) GVA1/GVA2= 0.57 GVA2 GVA1 greatest effect, amplified by a long drift MICE CM22 - 20/10/2008 - RAL

  16. Beam FeaturesBeamline Production Optics Diffuser SW/HW issues Conclusions What do we know of Q1-3 ? magnet measurements: g (meas.) = 0.5168+/-0.0011 (u.s.) 0.5125+/-0.0012 (d.s.) Tm-1 @ 50 A g (specs) = 10 Tm-1 @ 1000A Leff(specs) = 853.4 mm [no measurement available] magnet positioning: geometrical survey  slight misalignment Q1-3 axis to tgt point G4Beamline implementation: follows values as given in NOTE 066 (T. Roberts) MICE CM22 - 20/10/2008 - RAL

  17. Beam FeaturesBeamline Production Optics Diffuser SW/HW issues Conclusions TEST: vary Q1-3 Leff to check possible systematics [data] Question: can we be so wrong in determining Leff ? MICE CM22 - 20/10/2008 - RAL

  18. Beam FeaturesBeamline Production Optics Diffuser SW/HW issues Conclusions geometrical survey study Q4-point-1 Q4-point-6 1.76o Inclined_Frame_3 Inclined_Frame_2 Inclined_Frame_1 lowest point ??? mm 24.5 mm MICE CM22 - 20/10/2008 - RAL

  19. z z x y ~3-4 mrad ~15 mm ~15 mm to Q1 25o ISIS beam y slight mis-alignment should not cause great change in rate coordinates in ISIS frame x ~4 mm MICE CM22 - 20/10/2008 - RAL

  20. Beam FeaturesBeamline Production Optics Diffuser SW/HW issues Conclusions • Optics: • 0) Muon BL: P=208 MeV/c, • eN= 7 mm rad “ ... the mother of • all the beamlines “ • Proton BL: derived from • by rescaling magnet • currents according to local • momenta. P=440 MeV/c. Used • since Apr. 2008 for initial • calibrations/set-up. W and WO • decay solenoid (DS). • 2) Pion BL: from (a), ditto (b). • P=440/300 MeV/c. W and WO • DS • 3) Electron BL: from (a), ditto • (b). P=330 MeV/c. W and WO • DS. Used for PID calibrations. • NB: many BLs for different • flavours (p, p, m and e): • needed for detector • calibrations beamline scaling for electrons (similar tables exist for p and pi, using excel tables) MICE CM22 - 20/10/2008 - RAL

  21. Beam FeaturesBeamline Production Optics Diffuser SW/HW issues Conclusions Magnet Calibration Tables B(T)/g(Tm-1)I(A) MICE CM22 - 20/10/2008 - RAL

  22. Beam FeaturesBeamline Production Optics Diffuser SW/HW issues Conclusions Local Momenta at magnet entrances Material Budget Table+dE/dX Current Re-scaling MICE CM22 - 20/10/2008 - RAL

  23. Beam Features Beamline Production Optics Diffuser SW/HW issues Conclusions The case of a 9/10 coil solenoid TPT calculation for p Dx ~ 11 cm Dx ~ 5 cm Dx ~ 4 cm Dx ~ 9 cm • Used transport with (444 MeV/c pions) [K. Tilley]: • http://www.isis.rl.ac.uk/accelerator/MICE/Task%20Notes%20and%20Specifications/beamline%20-%20optics/referencedecks&matching.htm • CM14-7.1-200 Transport.FILE1.dat • all DECAY SOLENOID red • reduced DS (9/10) cyan MICE CM22 - 20/10/2008 - RAL

  24. Beam FeaturesBeamline ProductionOpticsDiffuserSW/HW issues Conclusions • Summary of available CODES • TPT/TTL • pros: • fast and usable for quick evaluation • a lot of previous work (KT + HN) • nice “graphic” output • cons: • sort of black box with funny decks • old documentation • not so easy output • d) magnet parametrisation? • ICOOL it could be used to reproduce the BL • pros: • fast • realistic: decay, material, single particle tracking • easy output • cons: • start from nearly scratch • apertures? (quadrupole hyperbolae etc) • G4Beamline • pros: • a) highly realistic • beam line basically set up • easy to run • nice output. • cons: • not easy to change intial conditions (e.g. target shape/orientation) • few local users (myself ) … need to fetch Tom (expert) for details • G4MICE • pros: • highly realistic • nice output • all comprehensive code: from tgt to KL all the way through MICE • allows matching • easy to get in touch with local users/experts (malcolm, chris, mark, …) • cons: • readiness? • magnet parametrisation? MICE CM22 - 20/10/2008 - RAL

  25. Beam FeaturesBeamline ProductionOptics Diffuser SW/HW issues Conclusions • system tested with air motors running • main issues found: • linear driving(cylindrical drum): needs precise stop • ACTION encoder used to stop disc before reaching the bottom • comment: 2 micro-switch will still be used for emergency only • driving of the bayonet pin • length between holding point of motor shaft and point of reaction force too long and holding area too small  the motor shaft bounce off the gear due to large shaft deflection • ACTION: The motor/gear box holder has been re-designed to increase stiffness.   • carousel • a) gear box used has NOT enough power to drive carousel whit a strongly unbalanced configuration • b) motor shaft bent as in above case • ACTION: worm wheel and gear with 65:1 ratio will be used to replace old design + new motor holder bracket re-designed to increase stiffness. • response time / residue airin the air tube when the motors stop • 3 m long pipe: overrun distance due to residual air = 0.02 mm • 16 m “ “ : “ “ “ “ “ “ = 0.04/0.08 mm • ACTION: mu-switch prior to end: 0.3 mm  mu-switches should be OK • back-pressure created when valve shuts before air exhausts • ACTION: MD to design logic sequence to overcome problem • magnetic effect on the air motors • ACTION replace the 3 air-motors with non-magnetic ones. Briggs Air motor contacted [15 days ago] and specs given • [P. Lau - Oxford] MICE CM22 - 20/10/2008 - RAL

  26. Beam FeaturesBeamline ProductionOptics Diffuser SW/HW issues Conclusions • - the relay driver board design finished just before mechanical tests • manufacturing postponed to add possible modifications to design • tests indicate control logic to be modified • electronic crate some minor change • other CEG commitments  slow down the process • no definite date on completion available • contact with RAL experts for installation (electronic issues) • [Mike Dawson - Oxford] m.apollonio UKNF meeting - Trinity College, Oxford - 15/16 Sep 2008 26 MICE CM22 - 20/10/2008 - RAL

  27. Beam FeaturesBeamline ProductionOptics Diffuser SW/HW issues Conclusions summary beam line status: • x500 less proton rate changed completely BL priorities: we need to produce/transport enough m • optics: • mainly available from main one with rescaling – need to check material budget for every specific case! • caveat when matching with MICE optics • beam characterisation (actual emittance)[e.g. emittance via TOFs, M.Rayner Analysis meeting] • hw main issues [solenoid] future plans: • ISIS beam simulation to tackle rate problem • comparison with data • change of tgt orientation (sim) ORBIT/G4xxx • PSI 9/10 optics  transmission study • alignment issues • optics matched with MICE MICE CM22 - 20/10/2008 - RAL

More Related