1 / 23

SCT EC Support Structure

SCT EC Support Structure. Support Structure. SCT EC Support Structure. Cylinder, Wings & In-Fill Panels. SCT EC Support Structure. Requirements Strength to Support 9 Wheels, Services & Thermal Enclosure. Maintain Module Positions in Long & Short Term (Defined in ATL-IS-ER-0027)

august
Download Presentation

SCT EC Support Structure

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. SCT EC Support Structure • Support Structure CLRC

  2. SCT EC Support Structure • Cylinder, Wings & In-Fill Panels CLRC

  3. SCT EC Support Structure • Requirements • Strength to Support 9 Wheels, Services & Thermal Enclosure. • Maintain Module Positions in Long & Short Term (Defined in ATL-IS-ER-0027) • Low Mass & Radiation Length Construction • Maintain External Dimensions that Remain Within Defined Envelope (0-TB-0049-177-01) • Radiation Tolerance to 0.24MGy CLRC

  4. SCT EC Support Structure • Envelope Figures reproduced from: 0-TB-0049-177-01 CLRC

  5. SCT EC Support Structure • Actual Sizes CLRC

  6. SCT EC Support Structure • Manufacturing & Assembly Tolerances • Deviation of final component size from nominal (within tolerance) • Accuracy of alignment when assembling components • Deformation of components during assembly (mainly Wheels & Services) • Accuracy of integration with TRT • Accuracy of Squirrel Cage Mount Rails w.r.t. nominal beamline CLRC

  7. SCT EC Support Structure • Adjustments to Reduce Effects of M&A • Wheel (& attached modules) Aligned With Disc Fixings • Sag in Cylinder • Averaging Out Locations of Module Rings • Averaging Out Component Assembly Misalignment • Wing Couplings (Shimmed & Slotted) • Adjust Relative to Squirrel Cage & Cryostat • Averaging Out Component Assembly Misalignment CLRC

  8. SCT EC Support Structure • x,y,z Coupling CLRC

  9. SCT EC Support Structure • Acclimatisation & Run-In • Thermal Contractions upon cool-down • Effects of moisture desorption in dry atmosphere • In Service Deformation • Local excitation where structures position affected • Variation in ambient temperature and effect on structural size • Long term creep effects • ‘One-off’ excitations where structural position affected CLRC

  10. SCT EC Support Structure • Short Term Stability • From ATL-IS-ER-0027, required stability in 1 day; • z = 200m • r = 50m • r- = 50m • Short term instability from, Excitation/CTE (CME after acclimatisation <<  10m in any direction / day) • Calculated • z =  52m @ W1 (worst case) • r =  9m (x), <  3m (y) (not incl. external input) • r- =  10m (x + 10%), no twist, (not incl. external input) CLRC

  11. SCT EC Support Structure • Low Mass & Radiation Length • Design optimisation through FEA to ensure minimal use of material • Use of high stiffness to weight composite structures & materials CLRC

  12. SCT EC Support Structure • Radiation Resistance • Materials Verified; • XN-50A/RS-3 5x107 Gy TD(CERN TIS 98-01, 18/5/98, Compilation of Radiation Damage Test Data, Tavlet M et al.) • RS-3 unfilled slight effect up to 107 Gy, RS-4A similar composition so no expected problems (same ref. as above) • Nomex 107 Gy TD, very similar to Korex so no expected problems (CERN TIS 82-10, 4/11/82, Compilation of Radiation Damage Test Data,Beynel P et al.) • Metallics, no expected problems. CLRC

  13. SCT EC Support Structure • Support Cylinder CLRC

  14. SCT EC Support Structure • Support Cylinder Continued… • Typical sandwich cross section CLRC

  15. SCT EC Support Structure • Rear Wing CLRC

  16. SCT EC Support Structure • Rear Wing Continued… • Typical sandwich cross section CLRC

  17. SCT EC Support Structure • Front Wing CLRC

  18. SCT EC Support Structure • Front Wing Continued • Typical Cross Section CLRC

  19. SCT EC Support Structure • In-Fill Panels CLRC

  20. SCT EC Support Structure • Conclusion • Support Structure size adjusted from envelope size to account for likely deformations • Manufacture & assembly tolerances adjusted out via disc fixings wing couples, acclimatisation adjustments possible too • Support Structure materials chosen for structural ‘ability’, environmental stability and radiation length characteristics CLRC

  21. SCT EC Support Structure • Conclusion Continued… • Overall component shapes defined by; • Envelopes • Structural requirements (through analysis & prototyping) • Interactions with components and with assembly / integration procedures. • Based on components shapes that have been successfully prototyped (prototype Barrel Cylinder & prototype Rear Wing). CLRC

  22. SCT EC Support Structure • Cradled EC Concept CLRC

  23. EC Mass & Radiation Length CLRC

More Related