1 / 10

Infrastructure :

Infrastructure :. Trouble Shooting Guide for VDSL Product. VDSL Technologies. Specification for “BroadCom” solution:. Trouble Shooting Guide for VDSL Product. VDSL Technologies. Specification for “Infinern” solution:. Trouble Shooting Guide for VDSL Product. VDSL Technologies.

arnie
Download Presentation

Infrastructure :

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Infrastructure :

  2. Trouble Shooting Guide for VDSL Product VDSL Technologies Specification for “BroadCom” solution:

  3. Trouble Shooting Guide for VDSL Product VDSL Technologies Specification for “Infinern” solution:

  4. Trouble Shooting Guide for VDSL Product VDSL Technologies Frequency spectrum: HomePNA – one band. VDSL - two band.

  5. Trouble Shooting Guide for VDSL Product Q & A. • Q: How can I do trouble shooting for VDSL product at once by myself ? • A:   • 1. If you have connect with PBX, which portPBX connected with splitter. • 2. And how about the connector? Areyou testing the connector whichconvert signal of VDSL/Ethernet? Do they make the connector by they or by it? • 3. Is the phone(which is on CPE side) working ok after the PBX connected with VDSL switch? • (for this case, just make sure the phone sites is working properly)CO and CPE link ok without PBX connect with?

  6. Trouble Shooting Guide for VDSL Product Q & A. • Q: As we knew, cross talk is really serious problem in the environment of • HomePNA application. Is Cross talk issue reveal on VDSL solution • more than on HomePNA ? • A: No not at all. • Theory of VDSL is similar with ADSL. Both of ADSL and VDSL are using two band and this is the point why cross talk is more seriously on HomePNA environment not on VDSL. If the cross talk reveal on the phone line, the ADSL and VDSL systems will be effective on the previous frequency range. The carry data can be transfer still by the next band (upstream). • How about HomePNA? There is one band to carry the transfer data. Because there is only one band HomePNA has, it’s no extra band to prevent the carried data will lost or not.

  7. Trouble Shooting Guide for VDSL Product VE-8918 Q & A Q: Does it support management via console, telnet and web browser? A: Yes. Supports management via console, telnet and browser. Q: Does it support QoS such as low-high priority queuing on per-port basis, queuing, etc? A: Switch supported 802.1q but not per-port base. Q: Bidder shall propose Network Management System (NMS) that has enough licenses to manage all proposed VDSL Switches and VDSL CPE A: Yes,  you can check CPE's status via VDSL switch.      The feature name call "OAM-Like". OAM-Like allow remote control CPE , such as statistic of link up/down, look-back test and remote reset CPE site.

  8. Trouble Shooting Guide for VDSL Product VE-8918 Q & A Q: Does VDSLswitch HTTP port number changeable ? We have some difficulties with remote control when switches are behind the router that has NAT. Does VDSLswitch support this feature? A: Yes, VDSL switch supported this feature. You can easy find this feature to change HTTP port number via console \ 2.Management setup\ 5. Management features control \ 1. Web-Based capability \ 2. Select HPPT port number.

  9. Trouble Shooting Guide for VDSL Product VE-8918 Q & A Information about VDLS product line compatible with Cisco's VDSL product line for your reference. 1.  VE-8918 is two band VDSL solution . 2.  VE-8918 is using VDSL technology as 10Base-S. The 10BaseS technology can work with ETSI/ANSI Plan 998 VDSL spectral allocation requirements, and supports the evolving ITU, and ANSI standards for VDSL physical media. 3. VDSL products, VE-8918 and VE-682M/S are available connected with Cisco - Cataylst 2900 LRE XL which is support Plan 998. 4. VDSL CPE can connect with Cisco - Cataylst 2900 LRE XL Switch which support Plan 998 without any settings.

  10. Trouble Shooting Guide for VDSL Product VE-8918 Information about VDLS product line compatible with Cisco's VDSL product line , for your reference.   Most Important Information : ★ VE-8918 can connect with Cisco LRE CPE on profiles as: ANSI, ETSI, VE-5, VE-10, VE-15 ★ VE-682 (CPE) can connect with Catalyst2900 LRE XL on profiles as: ANSI, ETSI, VE-5, VE-10, VE-15.

More Related