Download
1 / 7
70 likes | 87 Views
Chiller maintenance companies in dubai
E N D
A chiller is a common term for a device that controls the temperature by circulating a liquid-like liquid or hot water as a cooling fluid whose temperature is adjusted for the refrigeration cycle. In addition to maintaining the temperature of various industrial equipment and laboratory equipment, machinery and equipment at a permanent level, it is also used for air conditioning in buildings and factories. It is called a "chiller" because it is used for cooling purposes. The mold can supply cold water continuously while circulating water to the cooling device.
It is common to use water or water solution to transfer heat to a chiller, which may require the chiller process to have a reservoir and a water pump system. No matter what your industry and process, making sure you have enough cooling is important in producing and saving costs. The chiller maintenance companies in dubai offer the installation of high quality industrial chillers in your work Space. Types of Industrial Chiller: Water-Cooled Chillers Air-Cooled Chillers Comparison Between Air-cooled Water-cooled Chillers Vapor Compressor Chillers Vapor Absorption Chillers Screw chillers ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★
Every chiller has four main components: evaporator, condenser, compressor and expansion valve. The evaporator is a component that collects unwanted heat, and also produces cold water through the cooling process. The condenser rotates the refrigerator around the drain water in the condenser to remove heat. The compressor transfers the refrigerator to the condenser. There are various types of compressors, and the size of the application is a factor in determining the type of compressor that is best to use. The magnification valve allows the right amount of refrigeration required for the evaporator.
The chiller provides constant heat and pressure to your industrial process. Eliminating heat and flexibility makes the process and development easier, ensuring the highest quality product. Instead of a playful, one-way system, the chiller returns the cooling water. Inflation reduces the cost of water use which can be very expensive and save the environment . In most cooling systems, the pump system circulates cooled water or water solution / glycol from the chiller to the process. This cool liquid removes heat from the process and this warm liquid returns to the chiller. The cooling process consists of a chemical compound, called a refrigerator. There are many types of refrigeration and use depending on the temperature required but all work on the basic principle of compression and conversion of the refrigeration phase from liquid to gas and return to liquid . The process of heating and cooling the refrigerator and converting it from electricity to liquid and then returning to the refrigerator cycle.
The refrigeration cycle begins with a mixture of air / low gas mixture entering the evaporator.In an evaporator, heat from a water process or water solution in the refrigerator boils, which converts it from low-pressure liquid. The high-pressure fluid travels through the expansion valve, which controls how much liquid cooler enters the evaporator, thus starting the refrigerator cycle again. There are two types of condensers used in chillers; cool in the air and cool in the water. The cooling heater uses dry air to cool and freezes the gas in the hot refrigerator back into the liquid. In a cool water heater, water from a cool tower cools and thickens the refrigerator. Extended warranties and annual maintenance contracts should be properly renewed with the best chiller maintenance companies in sharjah.
