1 / 5

PAH Harry Peng hpeng@nortelnetworks

PAH Harry Peng hpeng@nortelnetworks.com. Synchronous. Ringlet Out. Ringlet In. data. Transmit is frequency locked to the receive. Write rate = Read rate Low frequency jitter and wander. Rx. data. Tx. Transit Buffer. clk. clk. CSU. CRU. Write. Read. fc-rx+/- Y ppm. PLL.

ann
Download Presentation

PAH Harry Peng hpeng@nortelnetworks

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. PAH Harry Peng hpeng@nortelnetworks.com IEEE 802.17

  2. Synchronous Ringlet Out Ringlet In data • Transmit is frequency locked to the receive. • Write rate = Read rate • Low frequency jitter and wander Rx data Tx Transit Buffer clk clk CSU CRU Write Read fc-rx+/- Y ppm PLL fc-tx = fc-rx IEEE 802.17

  3. Asynchronous Ringlet Out Ringlet In data • RX • PHY uses CDR to recover clock from the line • Receive data at Rate = upstream Tx oscillator: fc(rx)+/- Y ppm • Tx • Transmit data at local oscillator baud rate= fc(tx)+/- X ppm • Clock Accuracy • Free run SONET +/- 20ppm • Ethernet +/- 100ppm • Clock stability, aging • Mismatch of Write and Read rate • Starvation: fc(tx) > fc(rx) • Overflow: fc(tx) < fc(rx) Rx data Tx Transit Buffer clk clk CSU CRU Write Read Fc(rx)+/- Yppm Fc(tx)+/- Xppm OSC IEEE 802.17

  4. Asynchronous • Asynchronous operation applies to ethernet and Byte escape method • Ethernet • IPG and rate adaptation in Ethernet RS • One byte adjusted in IPG for every 5000 bytes • Byte Escape • Assumes PHY is doing the escaping • PSAP interface is in native format • Escaping occurs for both ingress and egress, balances out • Reduces add rate • Rate adaptation is the the SONET RS • Consistent Rate adaptation function preferred IEEE 802.17

  5. Synopsis • Starvation • Have to make sure no starve on transmission • Jumbo frames • One extra byte for every 5000 data bytes (+/-100 ppm) • Prefill FIFO before launching packet • Add Idle on egress • This is a bonus. • Overflow • Delete Idles on ingress • Delete one IDLE for every 5000 data bytes (+/- 100 ppm) • Have to ensure there is enough Idle between packets so removing is not a problem IEEE 802.17

More Related