1 / 4

Module Assembly

Module Assembly. Module assembly plate. Need to change vacuum pattern Need to find better method of sliding on location pins Might not be relevant as vacuum can be linked to all issues seen so far Hard to tell is sensor is against pins, especially with “straw” sliders

ami
Download Presentation

Module Assembly

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Module Assembly

  2. Module assembly plate • Need to change vacuum pattern • Need to find better method of sliding on location pins • Might not be relevant as vacuum can be linked to all issues seen so far • Hard to tell is sensor is against pins, especially with “straw” sliders • Landing pins might be moving/hard to set height

  3. Sensor-to-hybrid glue • Need to pick best method of stencilling on hybrid • Does stiff metal cause leakage? How uniform is the thickness? • Need to find better glue if possible which won’t need pre-curing • Higher viscosity • Work life >20min, < 2 hours • Cure time at room temperature <8 hours, <4 hours lets you reuse plates in a day

  4. More Module Assembly • Assembly Frame • Is this useful at all? • Module Bonding Plate • Leakage of vacuum because test frame • Hard to bond ends due to lack of support • Final hybrids don’t overhang

More Related