1 / 20

Truss Design Project

Truss Design Project. Kevin LaBeau Thao Lai EGR 209 Dr. Reffeor October 27, 2003. Problem Statement. Apply Math and Science skills to: Create a 24m bridge in West Point Bridge Designer (WPBD) Costs around $1500-$2500 Compute tensile and compressive strengths

amergin
Download Presentation

Truss Design Project

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Truss Design Project Kevin LaBeau Thao Lai EGR 209 Dr. Reffeor October 27, 2003

  2. Problem Statement • Apply Math and Science skills to: • Create a 24m bridge in West Point Bridge Designer (WPBD) • Costs around $1500-$2500 • Compute tensile and compressive strengths • Calculate internal forces for the bridge • Calculate the factors of safety • Find a standard hex bolt to withstand the forces

  3. Final Truss Bridge Design Results and Analysis • Bridge Cost: $2169.51

  4. Tensile and Compressive Strengths • Strengths related to • Material – High-Strength Low-Alloy Steel • Size of member • Solid Bars Vs. Hollow Tubes

  5. Tensile and Compressive Strengths

  6. Self-weight of truss members W = γs Am L where, γs= the density of the material Am= the cross-sectional area of the member L = the length of the member

  7. Self-Weight of Members

  8. Self weight on any joint • Total factored dead load on any joint Load factor = 1.25 for self weight given by WPBD

  9. Sample Calculations for Joint A Member identification

  10. Dead load diagram

  11. Situation 1 • Live load over Joint B.

  12. Situation 2 • Live load over Joint C.

  13. Situation 3 • Live load over Joint D.

  14. Member Forces • (T): Tension (C): Compression• All forces in kN

  15. Strength Force • Factor of Safety = Structural Adequacy • Average Factor of Safety • 4.122

  16. Bolt Size • Bolt grade = 10.9 • Tensile strength = 1040 MPa • Shear stress = .5*tensile strength • 520MPa • minimum bolt diameter = 55mm • standard bolt diameter = 56mm where, V = the shear force A = the cross-sectional area of the bolt

  17. Bridge Costs (minus cost of bolts)

  18. F F Ffelt Ffelt Ffelt Ffelt Discussion Geometric Stability • Triangle: most stable truss formation • evenly distributes forces through members • vertical forces unevenly distributed on the square. • squares can also pivot and collapse

  19. Geometric Stability • Arches • High resistance to the forces that will put stress on the bridge • The force will act in the direction of the member and on the joint itself • Stronger bridge structure = smaller members = lower costs

  20. Conclusion • Designs based on mathematical and physical concepts • Triangles are stronger than squares. • Arches evenly distribute forces for more stability. • Real life issues: costs & materials account for the design process • Important to keep costs at a minimum, but essential to never compromise safety • Engineers apply physical and mathematical models to design and build projects suitable for lives to use. • While working on this project, Kevin understands why SHEER STRESS = Thao

More Related