1 / 27

Modeling the Science of Flight A Teachers’ Guide to Aviation

Modeling the Science of Flight A Teachers’ Guide to Aviation. Sam Alva Carmilla Duran Jerry Esquivel Albert Simon July 30, 2009 Supercomputing Challenge Summer 2009. Introduction. Math Equations. Science Newton's Laws Bernoulli's Principals. Fascination.

alaula
Download Presentation

Modeling the Science of Flight A Teachers’ Guide to Aviation

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Modeling the Science of FlightA Teachers’ Guide to Aviation Sam Alva Carmilla Duran Jerry Esquivel Albert Simon July 30, 2009 Supercomputing Challenge Summer 2009

  2. Introduction

  3. Math Equations Science Newton's Laws Bernoulli's Principals Fascination

  4. Gather Material for Building Wind Tunnel • 4ft lnch 12 in diameter Concrete Cylinder Form Home Depot $10 • 12 Diameter Fan Home Depot $20 • 1/8 in 24 by 16 Plexiglas Home Depot $4 • 1in thick 4 by 4 Foam Board Home Depot $5 • Zip ties, Duct Tape, Clear Packing Tape, Paper Home Depot $6 Total $44.00

  5. List Foam Cutter Cardboard Sandpaper, Glue, Markers Micrometer, Calipers, Square, Ruler, Calculator Overlaying Material Scale ½, 1, and 2 Inch Foam Planks 4 by 4 Feet. 500 Grams of Molding Clay, Popsicle Sticks, Rubber Bands, Packing Tape, Duct Tape, Compass, Protractor

  6. Gather Testing Equipment and Material • Food Scale or Scientific Scale. Most schools have in science lab inventory. Can find online for about $30 to $100. • Hot wire foam cutter. You can build off plans from internet. Cost about $30. Hobby shops have small hand held for about $10. • Foam can be purchased at local hardware stores for about $8 for a 4ft by 8ft sheet.

  7. Pre Test Knowledge Student Should Know.

  8. Put Together Wind Tunnel and Test 1.Put fan and cylinder together using zip-ties. 2. Keep structure level using blocks or building a support. 3. Cut observing hole 11” by 11” 4. Place plexiglas over hole or cover with clear packing tape. 5. Make a diffuser using 8.5 by 11 Paper, rolled and taped together, then slide into the tunnel as one piece. 6. Tie yarn to diffuser for observation. 7. Build airfoils to test 8. Place airfoils in testing position. 9. Ask questions, use Scientific Method of Investigation 10.Share results.

  9. Prepare for Test • Scientific Method of Investigation • Internet is loaded with sites that show different methods for different levels of Education. • Science fair projects uses a nice format for this level.

  10. Internet

  11. Scientific Method of Investigation

  12. Choose a project idea

  13. 1. Ask a Question • What is the lift capacity of an airplane? • How can we simulate lift properties using a simulated computer program? • Bernoulli's Principal • Newton's Laws • Turn Down Flow Theory

  14. 2. Research the Topic • Complex System: Only Looking at Lift • See Bibliography • See PPT Slideshow • See Final Report

  15. 3. Formulate a Hypothesis • Can the results given by the Foil Simulator be verified as true?

  16. 4. Test Hypothesis http://www.grc.nasa.gov/WWW/K-12/airplane/foil2.html • Use Foil-Simm to calculate results

  17. 4. Develop a Test • Build a wind tunnel to test shapes of airfoils? • Asymmetrical • Symmetrical • Positive or Negative camber

  18. 4a. Conduct Background Investigation • [edit] Four-digit series the National Advisory Committee for Aeronautics (NACA • The NACA four-digit wing sections define the profile by:[1] • One digit describing maximum camber as percentage of the chord. • One digit describing the distance of maximum camber from the airfoil leading edge in tens of percents of the chord. • Two digits describing maximum thickness of the airfoil as percent of the chord. • For example, the NACA 2412 airfoil has a maximum camber of 2% located 40% (0.4 chords) from the leading edge with a maximum thickness of 12% of the chord. Four-digit series airfoils by default have maximum thickness at 30% of the chord (0.3 chords) from the leading edge. • The NACA 0015 airfoil is symmetrical, the 00 indicating that it has no camber. The 15 indicates that the airfoil has a 15% thickness to chord length ratio: it is 15% as thick as it is long. • [edit] Equation for a symmetrical 4-digit NACA airfoil • Plot of a NACA 0012 foil, generated from formula • The formula for the shape of a NACA 00xx foil, with "xx" being replaced by the percentage of thickness to chord, is:[2]

  19. 4b. Building a symmetrical, asymmetrical, and positive camber air foils. • Make pattern and cut • foam for three air foils. • 2.Freehand trim excess • material to make shape • 3. Sand to closer tolerance. • 4. Wrap overlaying material • over wing.

  20. 4c. Repeat for three wings three shapes. • Make pattern and cut • Foam for three Air foils. • 2.Freehand trim excess • Material to make shape • 3. Sand to closer tolerance. • 4. Wrap overlaying material • Over wing.

  21. 4d. Prepare for test

  22. Assumptions • NACA 1408 airfoil shape • Angle of attack 4 degrees • Wing span 40 feet • Chord length 4 feet ( wing area = 160 square feet) • Speed 100 mph or 147 feet per second at sea level • Program C++ to calculate lift L = (1/2.0) d v2 s CL

  23. Construct a Model to Demonstrate Results • Using NetLogo to view results

  24. 5. Analyze Results Wind Tunnel C++ NetLogo Math And Science

  25. 6. Draw Conclusion

  26. 7. Share Results

More Related