1 / 84

Network+ Guide to Networks 5 th Edition

Network+ Guide to Networks 5 th Edition. Chapter 4 Introduction to TCP/IP Protocols. Objectives. Identify and explain the functions of the core TCP/IP protocols Explain how the TCP/IP protocols correlate to layers of the OSI model

Mia_John
Download Presentation

Network+ Guide to Networks 5 th Edition

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Network+ Guide to Networks5th Edition Chapter 4 Introduction to TCP/IP Protocols

  2. Objectives • Identify and explain the functions of the core TCP/IP protocols • Explain how the TCP/IP protocols correlate to layers of the OSI model • Discuss addressing schemes for TCP/IP in IPv4 and IPv6 protocols Network+ Guide to Networks, 5th Edition

  3. Objectives (cont’d.) • Describe the purpose and implementation of DNS (Domain Name System) and DHCP (Dynamic Host Configuration Protocol) • Identify the well-known ports for key TCP/IP services • Describe common Application layer TCP/IP protocols Network+ Guide to Networks, 5th Edition

  4. Characteristics of TCP/IP (Transmission Control Protocol/ Internet Protocol) • Protocol Suite • “IP” or “TCP/IP” • Subprotocols • TCP, IP, UDP, ARP • Developed by Department of Defense • ARPANET (1960s) • Internet precursor Network+ Guide to Networks, 5th Edition

  5. Characteristics of TCP/IP (cont’d.) • Popularity • Low cost • Communicates between dissimilar platforms • Open nature • Routable • Spans more than one LAN (LAN segment) • Flexible • Runs on combinations of network operating systems or network media • Disadvantage: requires more configuration Network+ Guide to Networks, 5th Edition

  6. The TCP/IP Core Protocols • TCP/IP suite subprotocols • Operates in Transport or Network layers of OSI model • Provide basic services to protocols in other layers • Most significant protocols in TCP/IP • TCP • IP Network+ Guide to Networks, 5th Edition

  7. TCP (Transmission Control Protocol) • Transport layer protocol • Provides reliable data delivery services • Connection-oriented subprotocol • Establish connection before transmitting • Sequencing and checksums • Flow control • Data does not flood node • TCP segment format • Encapsulated by IP datagram in Network layer • Becomes IP datagram’s “data” Network+ Guide to Networks, 5th Edition

  8. Figure 4-1 A TCP segment TCP (cont’d.) Network+ Guide to Networks, 5th Edition

  9. Figure 4-2 TCP segment data TCP (cont’d.) Network+ Guide to Networks, 5th Edition

  10. TCP (cont’d.) • Three segments establish connection • Computer A issues message to Computer B • Sends segment • SYN field: Random synchronize sequence number • Computer B receives message • Sends segment • ACK field: sequence number Computer A sent plus 1 • SYN field: Computer B random number Network+ Guide to Networks, 5th Edition

  11. TCP (cont’d.) • Computer A responds • Sends segment • ACK field: sequence number Computer B sent plus 1 • SYN field: Computer B random number • FIN flag indicates transmission end Network+ Guide to Networks, 5th Edition

  12. Figure 4-3 Establishing a TCP connection Network+ Guide to Networks, 5th Edition

  13. UDP (User Datagram Protocol) • Transport layer protocol • Provides unreliable data delivery services • Connectionless transport service • No assurance packets received in correct sequence • No guarantee packets received at all • No error checking, sequencing • Lacks sophistication • More efficient than TCP • Useful situations • Great volume of data transferred quickly Network+ Guide to Networks, 5th Edition

  14. Figure 4-4 A UDP segment UDP (cont’d.) Network+ Guide to Networks, 5th Edition

  15. IP (Internet Protocol) • Network layer protocol • How and where data delivered, including: • Data’s source and destination addresses • Enables TCP/IP to internetwork • Traverse more than one LAN segment • More than one network type through router • Network layer data formed into packets • IP datagram • Data envelope • Contains information for routers to transfer data between different LAN segments Network+ Guide to Networks, 5th Edition

  16. IP (cont’d.) • Unreliable, connectionless protocol • No guaranteed data delivery • IP used by higher level protocols • Ensure data packets delivered to correct addresses • Reliability component • Header checksum • Verifies routing information integrity in IP header Network+ Guide to Networks, 5th Edition

  17. Figure 4-5 An IP datagram IP (cont’d.) Network+ Guide to Networks, 5th Edition

  18. Figure 4-6 IP datagram data IP (cont’d.) Network+ Guide to Networks, 5th Edition

  19. ICMP (Internet Control Message Protocol) • Network layer protocol • Reports on data delivery success/failure • Announces transmission failures to sender • Network congestion • Data fails to reach destination • Data discarded: TTL expired • ICMP cannot correct errors • Provides critical network problem troubleshooting information Network+ Guide to Networks, 5th Edition

  20. IGMP (Internet Group Management Protocol) • Network layer protocol • Manages multicasting • Allows one node to send data to defined group of nodes • Similar to broadcast transmission • Point-to-multipoint method • Uses • Internet teleconferencing, videoconferencing, routers, network nodes Network+ Guide to Networks, 5th Edition

  21. ARP (Address Resolution Protocol) • Network layer protocol • Obtains host (node) MAC (physical) address • Creates database • Maps MAC address to host’s IP (logical) address • ARP table (ARP cache) • Database on computers hard disk • Contains recognized MAC-to-IP address mappings • Increases efficiency Network+ Guide to Networks, 5th Edition

  22. ARP (cont’d.) • Two entry types • Dynamic • Created when client makes ARP request that cannot be satisfied by data in ARP table • Static • Entries entered manually using ARP utility • ARP utility • Accessed via the arp command • Windows command prompt, UNIX, or Linux shell prompt • Provides ARP table information • Provides way to manipulate device’s ARP table Network+ Guide to Networks, 5th Edition

  23. Figure 4-7 Example ARP table ARP (cont’d.) Network+ Guide to Networks, 5th Edition

  24. RARP (Reverse Address Resolution Protocol) • Problem: cannot use ARP • If device does not know its own IP address • Solution: RARP • Client sends broadcast message with MAC address • Receives IP address in reply • RARP server maintains table • Contains MAC addresses, associated IP addresses • RARP originally developed diskless workstations Network+ Guide to Networks, 5th Edition

  25. IPv4 Addressing • Networks recognize two addresses • Logical (Network layer) • Physical (MAC, hardware) addresses • IP protocol handles logical addressing • Specific parameters • Unique 32-bit number • Divided into four octets (sets of eight bits) • Separated by periods • Example: 144.92.43.178 Network+ Guide to Networks, 5th Edition

  26. Table 4-1 Commonly used TCP/IP classes IPv4 Addressing (cont’d.) • IP address information • Network Class determined by first octet • Class A, Class B, Class C Network+ Guide to Networks, 5th Edition

  27. IPv4 Addressing (cont’d.) • Class D, Class E rarely used (never assign) • Class D: value between 224 and 230 • Multicasting • Class E: value between 240 and 254 • Experimental use • Eight bits have 256 combinations • Networks use 1 through 254 • 0: reserved as placeholder • 10.0.0.0 • 255: reserved for broadcast transmission • 255.255.255.255 Network+ Guide to Networks, 5th Edition

  28. IPv4 Addressing (cont’d.) • Class A devices • Share same first octet (bits 0-7) • Network ID • Host: second through fourth octets (bits 8-31) • Class B devices • Share same first two octet (bits 0-15) • Host: second through fourth octets (bits 16-31) • Class C devices • Share same first three octet (bits 0-23) • Host: second through fourth octets (bits 24-31) Network+ Guide to Networks, 5th Edition

  29. Figure 4-8 IP addresses and their classes • Running out of addresses • IPv6 incorporates new addressing scheme Network+ Guide to Networks, 5th Edition

  30. IPv4 Addressing (cont’d.) • Loop back address • First octet equals 127 (127.0.0.1) • Loopback test • Attempting to connect to own machine • Powerful troubleshooting tool • Windows XP, Vista • ipconfig command • Unix, Linux • ifconfig command Network+ Guide to Networks, 5th Edition

  31. Figure 4-9 Results of the ipconfig /all command on a Windows XP or Windows Vista workstation IPv4 Addressing (cont’d.) Network+ Guide to Networks, 5th Edition

  32. Figure 4-10 Results of the ifconfig -a command on a UNIX workstation IPv4 Addressing (cont’d.) Network+ Guide to Networks, 5th Edition

  33. Binary and Dotted Decimal Notation • Decimal number between 0 and 255 represents each binary octet • Period (dot) separates each decimal • Dotted decimal address has binary equivalent • Converting each octet • Remove decimal points Network+ Guide to Networks, 5th Edition

  34. Subnet Mask • Identifies every device on TCP/IP-based network • 32-bit number (net mask) • Identifies device’s subnet • Combines with device IP address • Informs network about segment, network where device attached • Four octets (32 bits) • Expressed in binary or dotted decimal notation • Assigned same way a IP addresses • Manually, automatically (via DHCP) Network+ Guide to Networks, 5th Edition

  35. Table 4-2 Default subnet masks • Subnetting • Subdividing network single class into multiple, smaller logical networks (segments) • Control network traffic • Make best use of limited number of IP addresses • Subnet mask varies depending on subnetting • Nonsubnetted networks use defaults Network+ Guide to Networks, 5th Edition

  36. Assigning IP Addresses • Government-sponsored organizations • Dole out IP addresses • IANA, ICANN, RIRs • Companies, individuals • Obtain IP addresses from ISPs • Every network node must have unique IP address • Error message otherwise Network+ Guide to Networks, 5th Edition

  37. Assigning IP Addresses (cont’d.) • Static IP address • Assignment manually • Modify client workstation TCP/IP properties • Only way to change • Human error cause duplicates • Automatic IP addressing • BOOTP and DHCP • Reduce duplication error Network+ Guide to Networks, 5th Edition

  38. BOOTP (Bootstrap Protocol) • Mid-1980s • Application layer protocol • Central list • IP addresses, associated devices’ MAC addresses • Assign client IP addresses dynamically • Dynamic IP address • Assigned to device upon request • Changeable Network+ Guide to Networks, 5th Edition

  39. BOOTP (cont’d.) • BOOTP process • Client connects to network • Sends broadcast message asking for IP address • Includes client’s NIC MAC address • BOOTP server looks up client’s MAC address in BOOTP table • Responds to client • Client’s IP address • Server IP address • Server host name • Default router IP address Network+ Guide to Networks, 5th Edition

  40. BOOTP (cont’d.) • Process resembles RARP • Difference • RARP requests, responses not routable • RARP only capable of issuing IP address to client • BOOTP may issue additional information (client’s subnet mask) • BOOTP surpassed by DHCP (Dynamic Host Configuration Protocol) • More sophisticated IP addressing utility • DHCP requires little intervention • BOOTP difficult to maintain on large networks Network+ Guide to Networks, 5th Edition

  41. DHCP (Dynamic Host Configuration Protocol) • Assigns network device unique IP address • Automatically • Application layer protocol • Developed by IETF (BOOTP replacement) • Operation • Similar to BOOTP • Lower administrative burden • Administrator does not maintain table • Requires DHCP service on DHCP server • Many reasons to use Network+ Guide to Networks, 5th Edition

  42. DHCP Leasing Process • Device borrows (leases) IP address • Devices use IP address temporarily • Specified time limit • Lease time • Determine when client obtains IP address at log on • User may force lease termination • DHCP service configuration • Specify leased address range • Configure lease duration • Several steps to negotiate client’s first lease Network+ Guide to Networks, 5th Edition

  43. Figure 4-11 The DHCP leasing process DHCP Leasing Process (cont’d.) Network+ Guide to Networks, 5th Edition

  44. Terminating a DHCP Lease • Lease expiration • Automatic • Established in server configuration • Manually terminated at any time • Client’s TCP/IP configuration • Server’s DHCP configuration • Circumstances requiring lease termination • DHCP server fails and replaced • Windows: release of TCP/IP settings • DHCP services run on several server types • Installation and configurations vary Network+ Guide to Networks, 5th Edition

  45. APIPA (Automatic Private IP Addressing) • Client cannot communicate without valid IP address • What if DHCP server not running? • Microsoft offers Automatic Private IP Addressing • Windows 98, Me, 2000, XP, Vista, Windows Server 2003, Windows Server 2008 • Provides IP address automatically • IANA (Internet Assigned Numbers Authority) reserved predefined pool of addresses • 169.254.0.0 through 169.254.255.255 Network+ Guide to Networks, 5th Edition

  46. APIPA (cont’d.) • APIPA • Assigns computer’s network adapter IP address from the pool • Assigns subnet default Class B network • 255.255.0.0 • Part of operating system • No need to register; check with central authority • Disadvantage • Computer only communicates with other nodes using addresses in APIPA range Network+ Guide to Networks, 5th Edition

  47. APIPA (cont’d.) • APIPA suitable use • Small networks: no DHCP servers • APIPA unsuitable use • Networks communicating with other subnets, WAN • APIPA enabled by default: OK • First checks for DHCP server • Allows DHCP server to assign addresses • Does not reassign new address if static • Works with DHCP clients • Disabled in registry Network+ Guide to Networks, 5th Edition

  48. Quick Quiz #1 • 1. TCP/IP is a ____ of protocols. • Answer: Suite • 2. TCP (Transmission Control Protocol) operates in the ___ layer of the OSI model. • Answer: Transport  • 3. ____ is a Network layer protocol that reports on the success or failure of data delivery. • Answer: ICMP (Internet Control Message Protocol)  • 4. With DHCP, a device borrows, or ____ an IP address while it is attached to the network. • Answer: leases  • 5. True or False: It is unacceptable to leave APIPA enabled if it is not needed. • Answer: False Network+ Guide to Networks, 5th Edition

  49. IPv6 Addressing • IP next generation (IPng) • Replacing IPv4 (gradually) • IPv6 support • Most new applications, servers, network devices • Delay in implementation • Cost of upgrading infrastructure • IPv6 advantages • More efficient header, better security, better prioritization provisions, automatic IP address configuration • Billions of additional IP addresses Network+ Guide to Networks, 5th Edition

  50. IPv6 Addressing (cont’d.) • Difference between IPv4 and IPv6 addresses • Size • IPv4: 32 bits • IPv6: eight 16-bit fields (128 bits) • IPv6: 296 (4 billion times 4 billion times 4 billion) available IP addresses • Representation • IPv4: binary numbers separated by period • IPv6: hexadecimal numbers separated by colon • IPv6 shorthand: “::” any number of multiple, zero-value fields Network+ Guide to Networks, 5th Edition

More Related