D10-D11_parts_kammining

1. KAM's track adjuster design provides a safer, more reliable and durable tensioning system for use in some of the most high-risk and harshest environments in Australia. Dozer Track Adjuster Cannons D10 | D11 | Undercarriage Parts OEM Repaired or KAM New Does the end user know what cannons are been assembled in the track frame from a rebuild service supplier? But not all repairers are following the OEM specifications when they rebuild a cracked or broken cannon. Often, the cannon should be replaced, but instead of replacing it, they do repairs that should not be done. By taking short cuts like this, they are putting lives at risk. When you buy a rebuild cannon, it is usually supplied complete with the frame assembly. You can't tell what state the cannon is in because you can't see it. Has it been cracked or broken? Has it been repaired? If it has, were the repairs carried out according to the OEM specifications and instructions? Nobody knows because you can't see the cannon shaft. It's hidden inside the frame. Some unscrupulous repairers are joining pieces from two or more different broken cannons. They cut off the "good bits" and weld them together. Now there are 3 welded joints instead of the original 2 welded joints. They are adding more welded joints in the shaft and then they push the cannon inside the frame and the client can't see it. Then they have the hide to charge big dollars for a reman cannon that is nicely painted, and even looks brand new, but is not safe. When the OEM repair guide says, "not recommended", why are these people doing it? It's happening right here in this country. This is unfair to the end user. It gives a bad name to the OEM product. And you are getting ripped off! It doesn't matter what warranty you get with it. You can't replace people's lives with a warranty. When you get a rebuild frame assembly, please do ask some questions: What kind of cannon was installed? Has it been repaired? Were the repairs done according to the OEM instructions? Can you show me the evidence?

2. If you can’t find OEM cannon for your D10/D11 dozer, Kam Mining can assist you with aftermarket product Australian-made in stock. The price is comparable to many *repaired* cannons. But it is brand new! It interchanges with product numbers. 187-6289/180-3473..... https://kammining.com.au/