1 / 7

Introduction of Direct Memory Access (DMA)

Introduction of Direct Memory Access (DMA). Why is DMA?. It is wasteful to feed data into a controller register 1 bytes at a time. (PIO) The DMA unit is word. In the high loading environment, a system with DMA has better improvement. DMA transfer. DMA Progress.

Antony
Download Presentation

Introduction of Direct Memory Access (DMA)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Introduction of Direct Memory Access (DMA)

  2. Why is DMA? • It is wasteful to feed data into a controller register 1 bytes at a time. (PIO) • The DMA unit is word. • In the high loading environment, a system with DMA has better improvement.

  3. DMA transfer

  4. DMA Progress • To initiate a DMA transfer, the host writes a DMA command into memory: • A pointer to the source of a transfer • A count of the number of bytes to be transferred • …….. • The CPU writes the address of the DMA command block to the DMA controller.

  5. DMA Progress (cont.) • The DMA controller proceeds to operate the memory bus directly without CPU help. • Handshaking exists between DMA controller and device controller. • When the entire transfer is finished, the DMA controller will interrupts the CPU.

  6. Handshaking • DMA-request and DMA_acknowledge • When a word of data is available, the device controller places a signal on the DMA-request wire. • The signal causes the DMA controller to seize the memory bus, • To place the desired address on the memory-address wire • To place a signal on the DMA-acknowledge wire

  7. Handshaking (cont.) • When the device controller receives the DMA-acknowledge signal, • it transfer the word of data to memory • and remove the DMA_request signal.

More Related