1 / 24

Journal of Geophysical Research Wataru Tanikawa , Toshihiko Shimamoto

Frictional and transport properties of the Chelungpu fault from shallow borehole data and their correlation with seismic behavior during the 1999 Chi-Chi earthquake. Journal of Geophysical Research Wataru Tanikawa , Toshihiko Shimamoto. 指導教授:董家鈞 老師 報告者:陳宥任 日期: 2010/12/16. Introduction.

zurina
Download Presentation

Journal of Geophysical Research Wataru Tanikawa , Toshihiko Shimamoto

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Frictional and transport properties of the Chelungpu fault from shallow borehole data and their correlation with seismic behavior during the 1999 Chi-Chi earthquake Journal of Geophysical Research WataruTanikawa, Toshihiko Shimamoto 指導教授:董家鈞 老師 報告者:陳宥任 日期:2010/12/16

  2. Introduction large slip displacement (H: 9.8m, V: 5.6m) Low acceleration(0.5g) small slip displacement (H: 3.5m, V: 4m) Chelungpu fault Chelungpu fault High acceleration(1g)

  3. Introduction 211 m 450 m

  4. Introduction • Transport properties within a fault zone also have important influence on dynamic slip motion • Thermal pressurization mechanism is probably controlled primarily by transport properties • Thermal pressurization [Sibson, 1973] : Increase pore pressure induced by frictional heating can cause fault weakening [Han et al. 2010]

  5. Methods • Samples : • For friction tests • Southern : dark gray ultracataclasite from 176.8 m depth • Northern : clay-rich fault gouge from 286 m depth and 303 m depth • For transport property • Southern : 30-194 m depth • Northern : 40.5 – 402.5 m depth

  6. Methods Northern: (B,C)smectite, illite, kaolinite Southern: (A)Quartz, potassium feldspar X-Ray Diffraction

  7. Methods • Low-Velocity Friction Test Slide-Hold-Slide test [Shimamoto] Double-direct shear apparatus

  8. Methods • High-Velocity Friction Tests Rotational speed of 1200 rpm Normal stress from 0.6-0.9 MPa High-speed rotary-shear testing apparatus

  9. Methods • Transport Property Measurements • Permeability • Darcy’s law : • Klinkenberg equation : • Porosity • Boyle ‘s law : • Specific Storage

  10. Results • High-Velocity Friction Slip-weakening 0.8-1.2 0.2-0.4 V=1.04 m/s

  11. Results • Low-Velocity Friction 0.7 0.7 0.4-0.5

  12. Results • Low-Velocity Friction Tests velocity-dependent friction law

  13. Results • Permeability South > North

  14. Results Permeability distributions Hanging wall footwall footwall Hanging wall

  15. Results • Porosity 8~48%

  16. Results • Specific Storage

  17. Thermal Pressurization Analysis • Lachenbruch’s (1980) model : One-dimensional analysis of thermal pressurization process • Temperature change is given by the sum of production term and heat transfer term as follow: Heat production Heat transfer

  18. Thermal Pressurization Analysis • The change in pore pressure depends on temperature change and Darcian fluid flux as follow : T change Fluid flow

  19. Analysis Results

  20. Discussion • The high-velocity friction behavior is very different from low-velocity friction behavior • low-velocity friction coefficient • North(wet)~0.4 ;South(wet)~0.7 • The high-velocity steady-state value of friction coefficient (0.2) is similar the earthquake • Tanaka et al.[2006] reported in situ temperature deficits imply that dynamic friction was very low, the indicate that friction coefficient as low as 0.05 to 0.12 • Slip-weakening

  21. Discussion • Low velocity: • Northern gouge: velocity-strengthening • Southern gouge: velocity-weakening • If the faulting mechanism is represented by the behavior of wet gouge • the velocity-weakening frictional behavior in the south is consistent with the earthquake • Northern gouge exhibits velocity-strengthening behavior is inconsistent with the large slip displacement

  22. Discussion • Assuming at the hypocentral depth of the Chi-Chi earthquake T=200-300℃,vertical stress 120-150MPa • Thermally driven mineral transitions, such as dehydrantion of smectite to illite • Illite-rich gouge show velocity-strengthening behavior over the entire range of normal stress [Saffer and Marone,2003] • Numerical model : large slip caused by thermal pressurization • Northern controlled by thermal pressurization and material behavior

  23. Conclusions • The behavior of fault gouge material from shallow boreholes during high-velocity slip is much different than during low-velocity slip • Assuming wet gouge under low-velocity is consistent with the southern section • Thermal pressurization caused large slip and illite-rich gouge caused velocity-strengthening in northern section

  24. Thanks for your attention.

More Related