1 / 15

Engineering ESP

Engineering ESP. Calculation. Pump Sizing . Collect Data (well, production, fluid, electrical??) Determine production capacity of well Calculate Total Dynamic head (TDH) and determine tubing size Select pump stage Calculate number of stage required . Continue …….

zoe
Download Presentation

Engineering ESP

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Engineering ESP Calculation

  2. Pump Sizing • Collect Data (well, production, fluid, electrical??) • Determine production capacity of well • Calculate Total Dynamic head (TDH) and determine tubing size • Select pump stage • Calculate number of stage required

  3. Continue ……. • Check loading of pump shaft and pump housing pressure. • Calculate motor horsepower requirements and select motor

  4. Casing= 5.5” Perforation=6000’ Tubing=2.375” Pump set depth=5500’ Static fluid level=1820’ Downhole T=260F degree Wellhead P=100 psi Desire=1300 BPD Reservoir pressure=2598 psi Example….. 1. Collect data

  5. 2. Determination production Capacity of well • Flowing fluid flow=Static fluid level+ Drawdown So, Max Drawdown (to prefs)= Flowing fluid (pref Depth)- Stat fluid Level Max Drawdown (to prefs) = 6000’-1820’= 4180’ • Max drawdown P(psi)= Max Drawdown (to prefs)XPG Max drawdown P(psi)=4180’ X .433 psi/ft= 1810’ • Max Flow (Drawdown to pref)= Max drawdown P(psi)XPI Max Flow (Drawdown to pref)= 1810’ X .9 BPD/psi = 1629 BPD

  6. 3. Calculate TDH @ 1300 BPD • Flow level at 1300 BPD= Stat fluid level+ Drawdown Drawdown P (psi)= Desired / PI =(1300 / .9)=1444 psi • Drawdown feet= Drawdown P/ PG Drawdown feet=(1444/.433)= 3335 ft • Flowing fluid level @ 1300 BPD= Stat fluid level+ Drawdown feet =1820 ft +3335 ft =5155 ft

  7. Continue • Friction Loss= 31 ft/ 1k X5.5k ft= 170.5 ft

  8. 31 ft /1k ft

  9. Continue • WHP= 100 psi/ (.433 psi/ ft)=231 ft • Therefore, Total Dynamic Head =5155 ft+170.5+231 ft= 5556.5 ft

  10. 4. Selecting Pump stage type • Based on the desired flow rate(1300 BPD) • Select DN1300

  11. 5. Calculate Number of Stages Req • @ 1300 BPD, DN1300 Generates 20.4 ft/stage. (from 60 Hz 3500 RPM pump curve) • Number of stages = TDH/ Head ft # of Stages= 5556.5 ft/ (20.4 ft/ stage)= 272 stages • However, Use full housing of 276 stage

  12. 6. Check Loading of pump shaft and housing pressure • Pump HP=.315 HP/ stage (from curve) X 272 (# stages) X1 (SG)=87 HP • Max shaft rating =125 HP (from curve) (therefore, shaft is OK) • Max Head in oper. Range =24 ft/ stage X 276 stage= 6624 ft • Max pressure oper. Range = 6624 ft X .433 psi/ ft= 2868 psi ( housing pressure rating is 5000 psi from pump technical date, thus housing is ok)

  13. 7. Select Motor • Motor HP required = pump HP= 87 HP • Therefore, Select 456 series100 HP, 1350 Volts, 50 amp • Intermediate motor because of T

More Related