1 / 12

chemistry and technology of petroleum

chemistry and technology of petroleum. By Dr. Dang Saebea. Example. A vacuum residue of Conradson carbon (wt% CCR =15) is fed into a flexicoking at a rate of 200,000 lb/h, of API = 8.5 and with a sulphur content of 3.0 wt%.

Download Presentation

chemistry and technology of petroleum

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. chemistry and technology of petroleum By Dr. Dang Saebea

  2. Example • A vacuum residue of Conradson carbon (wt% CCR=15)is fed into a flexicokingat a rate of 200,000 lb/h, of API=8.5 and with a sulphur content of 3.0 wt%. • Find the amount of yield (lb/h) and their sulphur content. • Calculate yield of liquid products in BPD.

  3. Yield Correlations for Flexicoking The yield correlations for flexicoking are based on the Conradson carbon content of the vacuum residue (CCR, wt%), its API gravity and sulphur content (Sf). Data compiled by Maples (1993) are correlated to express weight percent yields. Gas composition:

  4. Yield Correlations for Flexicoking Sulphur distribution in products: Gravity of flexicoker feed and gas oil

  5. Solution

  6. Solution

  7. Calculate yield of liquid products in BPD. Gas oil density = gas oil SG x water density = 0.95 x 350.28 lb/barrel = 332.766 lb/barrel Gas oil (BPD) = 115,828 lb/hr x24 hr/day /332.766 lb/barrel = 8353.8 BPD

  8. Example 100 m3/h of heavy naphtha (HN) with specific gravity of 0.778 has the following composition: A =11.5 vol%, N = 21.7 vol% and P= 66.8 vol% is to be reformed to naphtha reformate of RON =94. Calculate the yields of each product for that reformer.

  9. Reformer correlations RONF=research octane number of feed; RONR=research octane number of reformate;C+5vol% =volume percent of reformate yield; SCFB H2=standard cubic foot of H2 produced/barrel of feed; K =characterization factor (TB)1/3/SG; TB= absolute mid-boiling of feed, (˚R); SG =specific gravity of feed; N = napthenesvol % and A ผ aromatics vol %

  10. Solution Given RONR= 94 and N+2A=44.7%, gives the following reformer yield: C+5 vol% =142.7914 – 0.77033x(94) + 0.219122x(44.7) = 80.17% The yields for the other products can then be calculated from the correlations in Table .

  11. Solution The material balance for the reformer is presented in the following table:

  12. The End

More Related