1 / 6

Arduino UNO Atmega8 By Robomart

The Robomart Arduino Board (ATMEGA 8A) is a microcontroller board based on the ATmega8A. It has 14 digital input/output pins, 6 analog inputs, A 16 MHz ceramic resonator, A USB connection, A power jack, An ICSP header and a reset button. It contains everything needed to support the microcontroller, Simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started. The Robomart Arduino Board Atmega8A is differs from all preceding boards in that it does use the PL2303 USB-to-serial driver chip. It has features to program Atmega8A as a USB-to-serial converter. https://www.robomart.com/buy-arduino-board-atmega-8a-india-price

zahidansari
Download Presentation

Arduino UNO Atmega8 By Robomart

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. ARDUINO UNO ATMEGA8 By RM1115

  2. Introduction of Arduino UNO Atmega8 The Robomart Arduino Board (ATMEGA 8A) is a microcontroller board based on the ATmega8A. This is the latest revision of the basic Arduino USB board. It connects to the computer with a standard USB cable and contains everything else you need to program and use the board. It can be extended with a variety of shields: custom daughter-boards with specific features. It is similar to the Duemilanove, but has a different USB-to-serial chip the ATMega8U2, and newly designed labeling to make inputs and outputs easier to identify

  3. Pin out of Arduino Uno Atmega8 RM1115

  4. Features of Arduino UNO Atmega8 • Microcontroller : ATmega8 • Operating Voltage : 7-12V • Input Voltage (recommended) : 7-12V • Digital I/O Pins : 14 (of which 3 pin provide PWM output) • Analog Input Pins : 6 • DC Current per I/O Pin : 40 mA • Flash Memory : 8KB of which 0.5 KB used by boot loader • SRAM : 2 KB • EEPROM : 512 Bytes • Clock Speed : 16 MHz

  5. Contact Us B5 C Block Sector 31, Above Indian Overseas Bank Noida Uttar Pradesh 201301 India Mob. +91-8744000555 Tel. +91-120- 4317229 Email ID admin@robomart.com Web. https://www.robomart.com

  6. Thank You

More Related