1 / 6

Automatic xDSL Test Sequences of ELQ 30A+

Automatic xDSL Test Sequences of ELQ 30A+.

zacherya
Download Presentation

Automatic xDSL Test Sequences of ELQ 30A+

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Automatic xDSL Test Sequences of ELQ 30A+ ELQ 30A+ provides automatic bi-directional Measurement of principal characteristics of the subscriber line using two instruments. They are connected to the ends of the tested pair in MASTER-SLAVE arrangement. The two instruments communicate over the tested pair. ■The Master initializes the measurements and collects the results. ■ The Slave performs the measurements according to the Master’s commands and sends back the results. ELQ 30A+ can be programmed as MASTER or SLAVE as well. Pre-programmed test parameter sets are provided containing: ■Tolerance masks for Loss, LCL, Return Loss, Impedance measurement ■Principal system parameters for VDSL2, VDSL1, ADSL2 +, ADSL, ADSL G LITE READSL2, ADSL G LITE, ADSL G.LITE2, SHDSL, HDSL, ISDN etc. systems. Using pre-programmed test parameter sets ELQ 30A+ provides immediate PASS/FAIL qualification and detailed information about the reasons of failure. Selectable xDSL Systems Selectable Test Programs Results of VDSL, ADSL Test Results of HDSL, SHDSL, ISDN Test To learn more click onthe selectedtopic! ELEKTR NIKA

  2. Selectable xDSL Systems ELEKTR NIKA

  3. Selectable Test Programs Short Program means measurement of: ■ Loss ■ Noise Notice: Loss and Noise measurements are mandatory for data transfer speed calculation Long Program means measurement of: ■ Loss ■ Noise ■ Return Loss ■ Impedance ■ Balance Free Program means: Any combination of measurements ELEKTR NIKA

  4. Detailed Results of VDSLandADSLQualification ELEKTR NIKA

  5. Detailed Results of HDSL/SHDSL/ISDNQualification ELEKTR NIKA

  6. THANK YOU FOR YOUR ATTENTION!

More Related