1 / 29

EXPERIMENTAL TESTS AND NUMERICAL MODELLING ON EIGHT SLENDER STEEL COLUMNS

EXPERIMENTAL TESTS AND NUMERICAL MODELLING ON EIGHT SLENDER STEEL COLUMNS U NDER INCREASING TEMPERATURES. Jean-Marc FRANSSEN*, Bin ZHAO** and Thomas GERNAY * * University of Liège, Belgium ** CTICM, France. 1) Introduction.

Download Presentation

EXPERIMENTAL TESTS AND NUMERICAL MODELLING ON EIGHT SLENDER STEEL COLUMNS

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. EXPERIMENTAL TESTS AND NUMERICAL MODELLING ON EIGHT SLENDER STEEL COLUMNS UNDER INCREASING TEMPERATURES Jean-Marc FRANSSEN*, Bin ZHAO** and Thomas GERNAY* * University of Liège, Belgium ** CTICM, France

  2. 1) Introduction

  3. At elevatedtemperature,stiffness of steeldecreasesfasterthanstrength. • The likelyhood of local bucklingisevenhigher • (factor 0,85 in Eurocode 3) • Design methodbased on 0,2% proof strength • or criticaltemperature of 350°C in Eurocode 3. • RFCS project FIDESC4 on class 4 sections (beams and columns)

  4. FIDESC4 • CTICM • Technalia • Lindab • Univ. of Liege • Univ. of Aveiro • Univ. of Prague Experimental tests Numericalmodels Parametric analyses Design equations

  5. 2) Test set-up • Heatingwasachieved by electricalresistances (30 KVA): • Better control of the temperatureincrease • More uniformtemperature distribution

  6. One heating mat + thermocouple tree

  7. 2 heating mats on the web 2 heating mats on one flange

  8. Columnwrapped in ceramic mats + displacementtransducer

  9. First blank test @ 100°C/h to control the uniformcharacterof the temperaturefield. Differences up to 70°C !

  10. Second blank test @ 100 and 200°C/h with a 10 mm gap between the ceramic pads and the steelmember. Differences ≤ 30°C

  11. Geometrical imperfections have been measured

  12. Boundary conditions: Pinned-pinned in one plane, fixed-fixed in the other plane Elongation unrestrained. Note: preliminarynumericalmodelingshowedthat no lateral support wasnecessaery at midlevel.

  13. Hinged support (nylon bearings)

  14. 3) Main results http://hdl.handle.net/2268/163773 Or Google « FRANSSEN ORBI »

  15. Test No 1 – IPE240A • Failure modes: global buckling along the weak axis without local buckling

  16. Test No 2 • Failure modes: global buckling along the weak axis with local buckling of the flanges

  17. Test No 4 • Failure modes:

  18. Test No 5 • Failure mode:

  19. Test No 6 • Failure mode:

  20. Test No 7 • Failure mode:

  21. Test No 8 • Failure mode:

  22. 4) Numericalmodelling Based on measured values of yieldstrength Geometry (length, thickness, imperfections) SAFIR shellfiniteelement (8 elements for the flange, 8 elements for the web, 100 elements on the length)

  23. Geometrical imperfectionsFirst 2 Eigen modes from CAST3M

  24. Numerical simulations / test resultsAverage: 1,01 – standard deviation: 0,04

  25. 5) What’snext? Data base made in Liege of 5 000+numerical tests performed on centricallyloadedwelded section steelcolumns Note: other data bases built by otherpartners Design equationsunder construction.

  26. 6) Conclusions 8 experimental tests performedunderwellcontrolled conditions Welldocumented: all detailledresults (willbe) published in an « open data » phylosophy Can beused to verifynumericalmodels or design equations.

More Related