1 / 8

Conversion of Timber

Conversion of Timber. Conversion of Timber. Trees are cut down during winter as there is less growth, therefore less sap After felling trees are transported to sawmills to be cut into boards This process of converting logs to boards is known as conversion 3 methods of conversion

york
Download Presentation

Conversion of Timber

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Conversion of Timber

  2. Conversion of Timber • Trees are cut down during winter as there is less growth, therefore less sap • After felling trees are transported to sawmills to be cut into boards • This process of converting logs to boards is known as conversion • 3 methods of conversion • Through and through sawing • Tangential sawing • Quarter sawing

  3. Through and Through Sawing • This is one of the most popular methods of sawing. The log is cut in parallel cuts in the direction of the grain.

  4. Through and Through Sawing • Advantages • Low cost and fast • Maximum width of planks obtained from log. • Little wastage. • Reveals attractive grain pattern, especially in softwoods. • Disadvantages • Not suitable for structural timber • With this method cupping caused by tangential shrinkage is a problem (cupping is the warping of the plank away from the heart of the tree)

  5. Tangential Sawing • The cut is made at a tangent to the annual rings of the log. • Log must be turned 90º after each cut. • Timber will display a flame figure

  6. Tangential Sawing • Advantages • Produce board with flame figure • Tangential boards are strong boards, used for beams and joists • Heartwood and sapwood are easily separated • These boards can take a nail without splitting because ofthe position of their annual rings • Disadvantages • Prone to shrinkage (Cupping) • It is expensive as the log is turned 90ºfor each cut

  7. Quarter Sawing • This method leaves the annual rings of the converted timber meeting the face of the board at 45 º or more. • It is important to note that the log must be rotated each time a cut is taken. • This method can bring the best features in wood as it produces silver grain which has clearly defined medullary rays

  8. Quarter Sawing • Advantages • An attractive grain pattern is produced • Boards are more stable and shrink less • Boards wear more evenly,important for flooring • Disadvantage • Expensive, as the log has to be first quartered then turned for every cut. • Because the log is quartered then cut again narrower boards are produced

More Related