1 / 20

Standardized Child Passenger Safety Training Program Winter 2004

Standardized Child Passenger Safety Training Program Winter 2004. Federal Role & Safety Standards. Objectives. Functions of NHTSA Federal regulations affecting occupant protection After market products. Federal Role & Standards - 2. Functions of NHTSA. Education Enforcement Research

xiu
Download Presentation

Standardized Child Passenger Safety Training Program Winter 2004

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. StandardizedChild Passenger SafetyTraining ProgramWinter 2004 Federal Role & Safety Standards

  2. Objectives • Functions of NHTSA • Federal regulations affecting occupant protection • After market products Federal Role & Standards - 2

  3. Functions of NHTSA • Education • Enforcement • Research • Regulations • Compliance Testing / Defect Investigation Federal Role & Standards - 3

  4. FMVSS 208 – Vehicle Restraints Summary of current standard: • Safety belts in all positions • Lap and shoulder belts in all outboard positions (soon - all rear positions) • Frontal air bags in all vehicles Federal Role & Standards - 4

  5. FMVSS 213 – Child Restraints • All CRS sold in US for children up to 65 pounds • Sets specific minimum performance and design standards Federal Role & Standards - 5

  6. Crash Testing • Simulates 30 mph frontal crash into a solid barrier • Using a standardized bench seat • Using lap belt (except BPB) Federal Role & Standards - 6

  7. Summary of the Current Performance Standards • Rear-facing CRS • Rotate forward no more than 70° from vertical • No force levels set for rear-facing CRS dummies • Forward-facing CRS • No more than 28” head excursion (may use tether to meet 28” limit) • Must also meet 32” head excursion limit without a tether • No more than 36” knee excursion • Head injury criterion • Chest acceleration • Manufacturers self certify compliance Federal Role & Standards - 7

  8. 35° from vertical Pre-test During Test Rear-Facing Test Criteria Maximum Angle of back support < 70o from vertical 65° from vertical Courtesy of Kathleen Weber, Child Passenger Protection Research Program, University of Michigan Medical School Federal Role & Standards - 8

  9. Forward-Facing Test Criteria 813 • Head excursion: < 720mm (28 in.) & < 813mm (32 in.) • Knee excursion: < 915mm (36 in.) 0 720 915 Courtesy of Kathleen Weber, CPS Research Program, University of Michigan Medical School Federal Role & Standards - 9

  10. Label Requirements • Weight & size guidelines • Basic use, installation & warnings • Air bag warning on rear-facing CRS • Manufacturer’s identification and 213 certification • Model number & date Federal Role & Standards - 10

  11. Dummies Used For CR Compliance Testing • Dummies used in tests represent an average-size (50th percentile) child of the age specified • Instrumented dummies can measure head and chest acceleration (33lbs & 47lbs) • The newborn dummy and 9-month dummy are not instrumented Federal Role & Standards - 11

  12. Crash Test Dummies Used For FMVSS 213 Compliance Testing Current • 7 pounds (Newborn) • 20 pounds (9 months) • 33 pounds (3 years) • 47 pounds (6 years) New after 8/1/05 • 22 pounds (12 month) • 34 pounds (3 years) • 52 pounds (6 years) • 62 pounds (weighted 6 years) Federal Role & Standards - 12

  13. FMVSS 213 - CRS LATCH Requirements • CRS must have tether attached if needed to meet 28” head excursion limit • CRS must be equipped with two lower attachments • Lower attachments may be flexible or rigid Federal Role & Standards - 13

  14. FMVSS 225 - Vehicle LATCH Requirements • At least 2 rear seating positions with lower anchors • 3 tether anchorage locations in rear • Can substitute integrated CRS in one seating position Federal Role & Standards - 14

  15. Moves belt too high on to abdomen Aftermarket Products • NO current federal standard for testing or regulation • Many products may mislead one to believe that they meet federal safety standards Federal Role & Standards - 15

  16. Padding too thick - no slots for harness Aftermarket Products • Shoulder belt positioning devices • Infant head-positioning pads and head rests • Similar items which come with CRS are tested with CRS • Seat saver mats • Toys that attach to CRs • Safety belt buckle covers • Safety belt add-ons • Safety belt locking devices Federal Role & Standards - 16

  17. TREAD Re: CRS • Improve safety of CRs through rulemaking (new dummies, new tests, etc.) • Clearer/simpler instructions/labels • CRS ratings • Booster seat study • 5-year strategic plan to protect 4-8 year olds Federal Role & Standards - 17

  18. Anton’s Law • Performance requirements for CRSs for children over 50 lbs • Develop 10-year-old dummy • Require lap and shoulder combination belt in center-rear seating position • Evaluate integrated CRSs Federal Role & Standards - 18

  19. CRS Ease-of-Use Ratings • Overall grade of A, B, or C based on average of grades from 5 categories • Pre-assembled vs. assembly required • Clarity of labeling on CRS • Clarity of written instructions • Ease of securing child in CRS • Ease of installing CRS in vehicle Federal Role & Standards - 19

  20. Identifying Recalled Child Restraints Hands-on Exercise • Locate CR labels • Record • Restraint Brand • Model Number • Manufactured Date • Using a current recall list determine and record recall status • What was the identified problem? Federal Role & Standards - 20

More Related