KX-NS8188 E1 Adapter KX-NS8290 PRI Adapter Product Information - PowerPoint PPT Presentation

slide1 n.
Download
Skip this Video
Loading SlideShow in 5 Seconds..
KX-NS8188 E1 Adapter KX-NS8290 PRI Adapter Product Information PowerPoint Presentation
Download Presentation
KX-NS8188 E1 Adapter KX-NS8290 PRI Adapter Product Information

play fullscreen
1 / 66
KX-NS8188 E1 Adapter KX-NS8290 PRI Adapter Product Information
436 Views
Download Presentation
xena-cabrera
Download Presentation

KX-NS8188 E1 Adapter KX-NS8290 PRI Adapter Product Information

- - - - - - - - - - - - - - - - - - - - - - - - - - - E N D - - - - - - - - - - - - - - - - - - - - - - - - - - -
Presentation Transcript

  1. NS1000 Version 2Document for SE and Sales Training KX-NS8188 E1 AdapterKX-NS8290 PRI AdapterProduct Information Rev 1.1EJanuary 09, 2013 Panasonic System NetworksPBX SE team Specifications and schedule are subject to change without notice.

  2. Trunk Adaptor IP Network 1. Introduction When customers want to use IP-Phone (*) mainly for extension and they want to use E1 or more than 2 PRI as trunk, KX-NS1000 version 2 with new trunk adapter is recommended because KX-NS1000 supports more IP capacity and IP functionality than KX-NCP or KX-TDE.(*)- KX-NT / KX-UT by Panasonic- NT based software phone by Panasonic- SIP hardware phone by other maker- SIP software phone for PC, Android, iPhone and so on PanasonicKX-NS8290 PRI30 SIP Extension PRI30 SIP Trunk (30-ch) KX-NS1000 PRI Card KX-NCS0290 215 mm (W)44 mm (H)200 mm (D) 500g SIPSoftphone OtherSIP Phone KX-UT KX-NT

  3. IP Network Stacking Card 2. Introduction On the other hand, when customer has Panasonic PBX now, they can add IP capacity and IP functionality using KX-NS1000 version 2 with stacking card KX-NS0130 with keeping current PBX.This configuration is useful for new customer also whenthey need more SLT phone, Digital PT with DSS Console,Analog PT and analog CO as well as IP-Phone. After adding KX-NS1000 Before adding KX-NS1000 AnalogCO AnalogCO Direct Connectionlike TDE600 to TDE620 KX-TDE KX-TDE KX-NS1000 CO Card CO Card SC Card SC Card MPR Card EXT Card EXT Card KX-NCS0130 100 % FeatureTransparencylike TDE600to TDE620 SIPSoftphone OtherSIP Phone KX-UT KX-NT SLT KX-DT w/DSS Console KX-DT w/DSS Console SLT

  4. 3. Table of Contents

  5. Chapter 1Overview

  6. Trunk Adaptor IP Network IP Network 11. Trunk Adapter for E1 / PRI Panasonic KX-NS8290 increases PRI capacity. KX-NS8188 for E1. Two PRI by card and adapter One PRI by card PanasonicKX-NS8290 PRI30 SIP Extension PRI30 PRI30 SIP Trunk (30-ch) KX-NS1000 KX-NS1000 IP Trunk AK PRI Card PRI Card KX-NCS0290 KX-NCS0290 KX-UT SIPSoftphone SIPSoftphone OtherSIP Phone OtherSIP Phone KX-UT KX-NT KX-NT Activation key of IP Trunk is NOT required in KX-NS1000 to connectPRI / E1 trunk adapter, even if SIP Trunk of KX-NS1000 is used.

  7. Trunk Adaptor Trunk Adaptor Trunk Adaptor 12. Trunk Adapter for E1 / PRI - Capacity Maximum 256 ch is available for E1 / PRI by adapter and IP trunk. Also useful to provide PRI/E1 with 2-ch Analog CO or 4 BRI. PRI30E1 PRI30 E1 SIPProvider PRI30E1 PRI30 SIP Trunk(30-ch) SIP Trunk(30-ch) SIP Trunk(xx-ch) 256ch AnalogCO SIP Trunk (30-ch) PRI Card CO Card Max. 256ch can be registered to SIP provider or the adapter.

  8. IP Network Reference 13. TDE as Option by H.323 KX-TDE with CO card increases CO capacity using H.323. More Analog CO by TDE (H.323) AnalogCO EnhancedQSIG AK EnhancedFeature AK KX-TDE IP Trunk AK CO Card H.323 IP Trunk AK MPR Cardw/ VoIP DSP Stacking card isnot required in this case. SC Card SIPSoftphone OtherSIP Phone KX-UT KX-NT Activation key of IP Trunk is required in KX-NS1000 for H.323 all channels and required in KX-TDE for more than 4 or 16 channels.Activation key for “Enhanced QSIG” is not required because this configuration needs only basic QSIG function.

  9. IP Network Trunk Adaptor Reference 14. TDE as Option by H.323 - Capacity Maximum 96 ch is available for Analog CO / BRI and H.323. Branch HQ PRI30 AnalogCO AnalogCO KX-TDE H.323 + SIP Trunk(256 ch) H.323(32 ch) KX-NS1000 CO Card KX-NCP CO Card H.323(96 ch) MPR Cardw/ VoIP DSP H.323(32 ch) CO Card Max. 96ch can be used for any other PBX. (Chanel is occupied only when call is made. )

  10. IP Network Stacking Card 15. Stacking Card Stacking Card increases DPT + SLT + Trunk capacity. 100 % FeatureTransparencylike TDE600 to TDE620 More Analog CO and DPT / SLT by Stacking Card AnalogCO Direct Connectionlike TDE600 to TDE620 KX-TDE KX-NS1000 CO Card SC Card SC Card EXT Card SIPSoftphone OtherSIP Phone KX-UT KX-NT KX-DT SLT This configuration is useful if customer needs DPT with DSS Console and so on.- SC card for TDE-NCP is installed instead of MPR card.- SC card for NS1000 is installed to free slot. (Slot for “PRI+2SLT” etc )

  11. IP Network IP Network Stacking Card 16-1. Stacking Card - Specifications SpecificationsYou can connect a maximum of 2 existing PBXs for one KX-NS1000. A maximum of 8 existing PBXs and 16 KX-NS1000 can be connected for the entire One-look Network. An existing PBX refers to a Panasonic KX-TDE series, KX-NCP series, or KX-TDA100/200/600/620 PBX. KX-TDE620 SC Card SC Card KX-TDE600 KX-TDE620 KX-TDE600 KX-NCP KX-NCP SC Card SC Card SC Card Max. 8 PBXs QSIG KX-DT KX-DT KX-DT KX-DT KX-DT KX-DT Different PBX category cannot be mixed to one KX-NS1000. Category 1 : KX-NCP500-1000 Category 2 : KX-TDE(A)100-200 Category 3 : KX-TDE(A)600-620Stacking card for KX-TDA100D is not planned currently. NCP500+TDE200 : N/ATDE100+TDA200 : OKTDE600+TDE620 : OKTDE620+TDE620 : OK

  12. Stacking Card 16-2. Stacking Card - Conditions Conditions- Cards in right table are not supported. Reason is as follows. - MPR is not required. - IP feature is supported by KX-NS1000. - DISA/SVM feature is supported by KX-NS1000 without AK. - New cards for TDE-NCP version 5 are N/A. - By above condition, KX-NT400 and KX-HGT100 cannot be used after connecting with KX-NS1000.- IP capacity AK is not required for trunk and extension in existing PBXs because these are not IP. - Other AK such as CA is required in KX-NS1000 for extension in existing PBX.- In case of TDA100/200 and TDE100/200 OPB3 card with ECHO16 must be installed in only Slot 1. *) Other cards except OPB3 or OPB3 card with other daughter board except ECHO16 can be installed to any slot.

  13. Stacking Card 17. Stacking Card - Programming ProgrammingIt is not required to program for connection (Same as TDE600 to TDE620 connection). Property of cards in TDE/NCP can be programmed using NS1000 Web.

  14. 18. Recommendation of Configuration KX-NS1000 is recommended as follows, when new customer does not have Panasonic PBX now and they want to use IP phone mainly for extension. Version 1 & 2 Version 2 Version 1 & 2 Version 2

  15. 19. KX-NS1000 Capacity Total capacity is as follows. (*1) 24SLT x 10 by TDE620 x 2 for example(*2) 256 DPT incl DXDP by TDE620 x 2 for example

  16. Chapter 2Specifications

  17. 21. Hardware Appearance Hardware Appearance is as follows. Front Back Wall Mountain Unpack the box and check the items below: Main Unit x 1 Screw x 2 Washer x 2

  18. 22. PoE (Power over Ethernet) KX-NS8188 / KX-NS8290 supports PoE.If PoE is not supported by network, AC adapter is required. KX-A420 for Brazil KX-A239 for others*) These are same model of AC adapter for KX-UT phone.

  19. Trunk Adaptor 23. KX-NS8188 E1 Adapter KX-NS8188 E1 adapter supports following features. E1 KX-NS8188 KX-TDA0188 KX-NS1000 KX-TDE

  20. Trunk Adaptor 24. KX-NS8290 PRI Adapter KX-NS8290 PRI adapter supports following features. “No” because these services by ISDN provider are not popularand PBX can support same feature basically. ConfbyPBX ConfbyISDN ISDN KX-NS8290 KX-NS0290 PRI Card KX-NS1000

  21. Trunk Adaptor 25. KX-NS8290 PRI Adapter for QSIG KX-NS8290 PRI adapter supports QSIG also. NS1000 or other PBX PRI QSIG Private Network(Leased ISDN) PRI QSIG H.323 QSIG 30ch or 23ch IP Trunk AK H.323 is used for this configuration instead of SIP. KX-NS1000

  22. Trunk Adaptor Trunk Adaptor Trunk Adaptor Trunk Adaptor Trunk Adaptor 26. Fractional Service Fractional service is also available.<Stand alone> 20chE1/PRI 20ch KX-NS1000 <One-look network> 20chE1/PRI 60chE1/PRI 10chE1/PRI Total 256ch 20ch 10ch 30ch 30ch 16th KX-NS1000in Niseko 1st KX-NS1000in Fukuoka 2nd KX-NS1000in Tokyo

  23. Trunk Adaptor Trunk Adaptor 27. Solution with “Back-up Master” Back-up is available automatically for SIP trunk incl E1 / PRIadapter, KX-NT/UT IP-phone and one look connection. PRI/E1 or SIP Provider Back-up master PBX works as slave PBX usually.But it works as master PBX after master PBX stops working. KX-NS1000 (2nd)Back-up Master SIP Trunk One-Look AK One-Look AK KX-NS1000 (1st)Master KX-UT KX-UT KX-NT KX-NT PRI/E1 or SIP Provider After master PBX stops working, KX-NS1000Back-up Master SIP Trunk One-Look AK One-Look AK KX-NS1000Master KX-UT KX-NT KX-UT KX-NT

  24. Chapter 3Concept of Programmingfor Public Connection

  25. Trunk Adaptor 31. Concept of Programming - Adapter The trunk adapter is PBXwith E1 / PRI trunk and SIP extension.SIP trunk of KX-NS1000 is registered to SIP extension of the adapter.<Programming for the trunk adapter>Software of the adapter is basically same as KX-NS1000. Features except E1 / PRI and SIP extension are removed. Therefore programming method is very similar to KX-NS1000. E1/ ISDN - PRI configuration is same as programming for KX-NS1000 PRI card (KX-NS0290). E1 configuration is same as KX-TDE E1 card (KX-TDA0188). - SIP extension configuration is same as KX-NS1000. But SIP extension is programmed by default. 401 to 430 for E1 / PRI30 401 to 423 for PRI23 PRI E1 / PRI SIP Extension401-430 30ch or 23ch ID 401-430SIP Trunk KX-TDA0188 PRI Card KX-NS0290 KX-NS1000 KX-TDE

  26. Trunk Adaptor 32. Concept of Programming – NS1000 <Programming for KX-NS1000>The trunk adapter is basically SIP provider for KX-NS1000.Following has to be programmed.- IP address of the adapter as SIP server destination - SIP registration User ID (Password is not required.)- Connection Attribute : SIP Provider / Trunk Adapter E1/ ISDN E1 / PRI SIP Extension401-430 30ch or 23ch ID 401-430SIP Trunk KX-NS1000

  27. 33. Concept of Programming - Call <Programming for KX-NS1000 - CONT>Programming of the trunk adapter is not required for DDI / DIL incoming call from E1/PRI to SIP extension. It works like DIL 1:1 without programming and DDInumber and caller ID are informed from the trunk adapter to KX-NS1000.Programming of KX-NS1000 is required for DDI / DIL.Outgoing call is also programmed forKX-NS1000 instead of the trunk adapter. Therefore administrator has to access only KX-NS1000 to change extension number, DDI and so on after dealer installed. E1 / ISDN E1 / PRI CH1 CH2 CH30 Trunk Adapter DDICaller ID SIP Extension 401 402 430 SIP Trunk KX-NS1000

  28. Trunk Adaptor Chapter 4Step by Step Programmingfor Trunk Adapter KX-NS1000

  29. Trunk Adaptor 41. Initialize Operation and “SYSTEM” LED display is as follows.1. Power On (Connect AC adapter or connect LAN with PoE) (a) Amber On (5 sec) (b) Amber rapid flash (5 sec)2. During (b), keep pressing Initialize button for 1s. (c) Off (2 sec) (d) Amber On (30 sec) (e) Amber slow flash (120 sec) (f) Green slow flash- Display of (b) finishes before 5 sec after operation of (2).- Display of (f) means success of initialization and awaiting “Easy set-up” of web maintenance console. KX-NS1000 System LED Initialize Button

  30. Trunk Adaptor 42. LED Indication LED indication is as follows. KX-NS1000

  31. Trunk Adaptor 43. PC Connection - 1 (1) Set IP address 192.168.0.99 for example to your PC like first connection of KX-TDE or KX-NCP. - Trunk adapter does not have maintenance port with DHCP server. - Sub-net mask should be 255.255.255.0 (2) Connect 192.168.0.151 by Firefox. - Default IP address of trunk adapter is 192.168.0.151. KX-NS1000 KX-NS1000 DHCP Server 192.168.0.101by default Trunk Adapter For demo, NS1000 with DHCP server function is useful to assign IP address of PC automatically. 192.168.0.151by default 192.168.0.99for example

  32. Trunk Adaptor 43. PC Connection - 2 (1) In 10 seconds from step in previous page, log-in menu is displayed.(2) Input “INSTALLER” as user and “1234” as password. KX-NS1000

  33. Trunk Adaptor 44. Easy setup - Language selection (1) Select language. KX-NS1000

  34. Trunk Adaptor 44. Easy setup - 1 (1) Select Suffix of KX-NS1000 and area. KX-NS1000 No need to change If Suffix is changed, system restarts again after click [OK].Wait 3 min and connect PC again. (a) Amber slow flash (30 sec)(b) Amber On (10 sec)(c) Amber rapid flash (5 sec)(d) Amber On (30 sec)(e) Amber slow flash (120 sec)(f) Green slow flash

  35. Trunk Adaptor 44. Easy setup - 2 No need to change.- Adapter name is only for reference.- Time is used only for error log. KX-NS1000

  36. Trunk Adaptor 44. Easy setup - 3 (1) Input IP address of trunk adapter in actual customer’s network. Get the IP address from IT manager.*) For demo, default is OK. KX-NS1000

  37. Trunk Adaptor 44. Easy setup - 4 No need to change.- Time is used only for error log. KX-NS1000

  38. Trunk Adaptor 44. Easy setup - 5 (1) Input password as you hope, click [Finish].(2) Wait for 30 seconds. KX-NS1000 If LAN setting is changed, system restarts again after click [OK].Wait 3 min and connect PC again. (a) Amber slow flash (30 sec)(b) Amber On (10 sec)(c) Amber rapid flash (5 sec)(d) Amber On (30 sec)(e) Amber slow flash (120 sec)(f) Green slow flash

  39. Trunk Adaptor 45. Maintenance Console - Top menu If LAN setting is changed, (1) Remove the trunk adapter from LAN(2) Connect it to actual customer’s network.(3) Connect PC to IP address of trunk adapter using Firefox.(4) After log-in, following top menu is displayed.If LAN setting is not changed, following Top menu is displayed. KX-NS1000

  40. Trunk Adaptor 45. Maintenance Console - 1 Software version can be confirmedas follows. KX-NS1000

  41. Trunk Adaptor 45. Maintenance Console - 2 Parameter for PRI can be modified as follows.(Same as “PRI + 2 SLT” card) KX-NS1000

  42. Trunk Adaptor 45. Maintenance Console - 3 IP address of adapter can be changed.(No need to change usually.) KX-NS1000

  43. Trunk Adaptor 45. Maintenance Console - 4 Software can be updated by one step.(Not same as KX-NS1000) - Wait 15 minutes after clicking [Execute]. (Same as KX-NS1000.) KX-NS1000

  44. Trunk Adaptor 45. Maintenance Console - 5 E1/ PRI Card diagnosis is supported. KX-NS1000 Out of service can be assigned.This is required for software update also.

  45. Chapter 5Step by Step Programmingfor KX-NS1000

  46. Trunk Adaptor Trunk Adaptor 51. KX-NS1000 - Out of Service Install virtual SIP trunk card.Out of service is required for port or card beforeprogramming in following pages. KX-NS1000

  47. Trunk Adaptor Trunk Adaptor 52. KX-NS1000 - Connection Attribute Change connection attribute from “SIP provider”to “Trunk Adapter” for each channels or click[Trunk Adapter] button to change max. 30 ch at the same time. Use this. No need to program each ch. KX-NS1000

  48. Trunk Adaptor Trunk Adaptor 53. KX-NS1000 - Trunk Adapter button - 1 Input IP address of trunk adapter and click [Next].- Trunk adapter name is for reference. 192.168.0.151 192.168.0.152 KX-NS1000 Web maintenance console for the trunk adapter is opened. For reference Max. 16 Adapter*) If program manually not using “trunk adapter”, more than 16 adapter can be programmed.

  49. Trunk Adaptor Trunk Adaptor 54. KX-NS1000 - Trunk Adapter button - 2 Select range to connect the trunkadapter instead of SIP provider.Select IP address and click [Finish].If fractional service is used, set “20” for example. Otherwise NS1000 tries making call using 21ch to 30ch of PRI. 192.168.0.151 192.168.0.152 SIPProvider KX-NS1000

  50. Trunk Adaptor Trunk Adaptor 55. KX-NS1000 - Registration to SIP Server Connection attribute were programmed by previous step. Parameters for registration to SIP server (E1/PRI adapter) were also programmed. 192.168.0.151 192.168.0.152 KX-NS1000