1 / 26

Current Electricity

Series Circuit. Parallel Circuit. Current Electricity. What You Will Learn. Transfer of energy in circuits. Conversion of energy. Electric Current – Conventional vs. Flow of Electrons Resistance and Ohm’s Law Basic Circuits. What You Already Know.

wrooney
Download Presentation

Current Electricity

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Series Circuit Parallel Circuit Current Electricity

  2. What You Will Learn • Transfer of energy in circuits. • Conversion of energy. • Electric Current – Conventional vs. Flow of Electrons • Resistance and Ohm’s Law • Basic Circuits

  3. What You Already Know • You flip a switch to turn on a light, TV or computer. • To turn on the car, you turn the ignition switch. • MP3 players, cell phones and flashlights have on/off switches and use batteries. • In each of these cases, you have a closed circuit in which electricity flows.

  4. What You Already Know • Charge by Conduction – The process by which electrons are transferred from one object to another because of differences in excess number of electrons on one surface compared to the other.

  5. + + + + + + + + + + + ++++ - - - - - - - - - - - ---- F is constant since the electric field is constant from one plate to the other. What You Already Know - Electric Potential • the Electric Potential Difference is equal to the Work required to move a test charge in an electric field divided by the magnitude of the test charge. A B qo F = qoE Uniform Electric Field Vtotal = W/qo = Fd/qo = Ed

  6. + + + + + + + + + + + ++++ - - - - - - - - - - - ---- Plate with excess number of electrons Two equal and oppositely charged plates Plate with deficiency of electrons Creating a Circuit What would happen if a conductor was connected to both plates?

  7. + + + + + + + + + + + ++++ + - + - + - + - + - + - + - + - - - - - - - - - - - ---- + - + - + _ + - + - + - + - + Conventional Current Flow + - + - + -+ - + - + - + - + - + - + - + - + - - - - - - - Electron Flow Creating a Circuit The electrons would flow from the negatively charged plate to the positively charged plate until the amount of charge was the same for both plates and the wire. How do we maintain the flow of current?

  8. + + + + + + + + + + + ++++ - - - - - - - - - - - ---- • Charge pump • Battery • Generator • Gas/Oil • Nuclear • Hydro • Wind • Tidal • Solar Electron Flow Electron Flow Creating a Circuit • Circuit: • A closed loop in which electric current can flow. • It generally includes a device such as a light bulb that reduces the electric potential energy. • It also includes a device to increase potential energy (Charge Pump).

  9. What is Current? • Current is the rate of flow of charge. I = q/t = 1 Coulomb/second = 1 Ampere (A) • Conventional Current = flow of positive charge. (Note that positive charges do NOT flow in metallic conductors.) • Electron flow is simply the flow of electrons.

  10. Ohm’s Law • German Georg Simon Ohm discovered that the ratio of the potential difference to current is a constant for a given conductor. R = V/I Where: R = Resistance in Ohms () V = Electric Potential in Volts (V) I = Current in Amperes (A) • Resistance is the hindrance to the flow of charge. • Most metallic conductors obey Ohm’s Law.

  11. m = R = V/I Non-Ohmic e.g. light bulb Ohm’s Law • The resistance (R) represents the slope (m) of a curve where V is plotted against I. • What is R? • For Ohmic materials, the curve is a straight line. 10

  12. Examples: Ohm’s Law • How much current flows through a 12 flashlight bulb operating at 3.0 volts? • What is the voltage drop in a 5 resistor that has 2 amperes of current running through it? • What is the resistance of a heating element in a toaster operating at 120 volts with a current flow of 2 amperes?

  13. What causes resistance? • E-field in conductor (resistor) is provided by a battery or voltage source. • Charges (electrons) are put in motion due to influences of the electric field, but scatter in a very short time from things that get in the way • defects, lattice vibrations (phonons), etc • The more collisions, the greater the resistance and the fewer the collisions, the less the resistance. • Imagine trying to run down the hallway in between periods versus running down the hallway during the period when there is nobody in them. The latter would be much easier.

  14. How fast do the electrons travel? • A simple observation would tell an observer that the flow of electricity appears to be instantaneous when flipping on a light switch. • Does that mean the electrons travel at the speed of light?

  15. - - - - - - - - - - + + + + + + + + + + Drift Velocity • When an electric field is applied to a conductor, it will set the electrons in motion in an overall direction opposite the applied field. • While the electric field travels at nearly the speed of light, the overall drift speed of the electron from one end of the conductor to the other is quite slow and random in direction due to collisions. • For a 20A circuit in your home with 1A of current flow, the electrons would only travel 0.08 m (8 cm) in 1 hour! e

  16. Resistivity & Resistance • Resistivity is a measure of the conductive ability of the material. • Resistivity is an intrinsic (natural) property of a material. • The higher the resistivity, the higher the resistance and vice versa. • For a conductor of length L (m) and cross-sectional area A (m2), the resistance can be determined by: R = L/A Where  = resistivity (•m) L = length of the conductor A = Cross-Sectional Area

  17. Ex.: Resistance & Resistivity • What would happen to the resistance in a wire if the length were increased? • It would decrease. • It would increase. • It would remain the same. • What would happen to the resistance in a wire if the cross-sectional area were increased? • It would decrease. • It would increase. • It would remain the same. • What would happen to the resistivity the length were increased? • It would decrease. • It would increase. • It would remain the same.

  18. I I Low Resistance vs. High Resistance • To Summarize: • Short fat wires make good conductors. • While long skinny wires make poor conductors. Short & Fat = Low Resistance Long & Skinny = High Resistance

  19. Resistance Resistance Length X-Sectional Area Resistance vs. Length and Resistance vs. X-Sectional Area • What is the relationship between:

  20. Resistivity vs. Temperature Note: The Resistivity is zero at 0 K, therefore, the resistance is also zero.

  21. I = q/t = 1 Coulomb/second V = W/q = 1 Joule/Coulomb Power • Power = Rate at which work is done where: P = VI P = 1 Joule/second = 1 Watt P = VI = (1 Volt)•(1 Ampere) = 1 Watt • Since V = IR and I = V/R: • P = IRI = I2R • P = V•V/R = V2/R

  22. Example (Power) • What is the power rating of a lightbulb in circuit where the current is 0.50 A and the voltage is 120V? • P = VI • P = 120 V•0.50 A • P = 60 VA = 60 W

  23. Power Power Current Voltage Power vs. Current and Power vs. Voltage (Ohmic Materials) • What is the relationship between: • power and current?Power and voltage? P = I2R P = V2/R

  24. Energy • Since power is the rate at which work is done the amount of energy required to complete a task is as follows: Total Energy = Power x time W = Pt

  25. Example (Energy) • How much energy is consumed by a lightbulb operating in circuit where the current is 0.50 A and the voltage is 120V for 1 hour? • W = VIt • W = 120 V•0.50 A•3600 s • W = 216,000 J • W = 216 kJ

  26. Key Ideas • A circuit is a closed path where current can flow. • Current is the flow of charge. • Resistance is the hindrance to the flow of charge. • Ohm’s Law = voltage to current ratio (V/I) = Resistance. • Resistivity is an intrinsic property of a material that is proportional the the resistance. • An increase in length of a conductor will increase resistance. • An increase in cross-sectional area of a conductor will decrease resistance. • Power equals the rate at work is done and is represented electrically by P = IV.

More Related