1 / 6

Huawei H35-561-ENU Exam Dumps Questions

Huawei H35-561-ENU exam dumps questions have been updated, which can guarantee you pass the test successfully.

wirygnrhd
Download Presentation

Huawei H35-561-ENU Exam Dumps Questions

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Huawei H35-561-ENU exam dumps are available for you to clear HCIP-LTE-RNP&RNO V1.0 H35-561-ENU test. Full version: 430 Q&As Full Version of H35-561-ENU Exam Dumps Share Huawei H35-561-ENU Exam Dumps Below. 1.Which of the following are the trigger conditions for random access? (Multiple choice) A. RRC_IDLE initial access B. Initial access when the wireless link is disconnected C. Receiving downlink data in the RRC_CONNECTED state, requiring random access, that is, the UE is out of step when called D. Random access is required when switching Answer: ABCD

  2. 2.In channel coding, what is the maximum code block size when the code block is segmented? A. 6144 B. 4096 C. 5120 D. 7168 Answer: A 3.In the RRC Connection Reestablishment Request message, what are the reasons for re-establishment? (Multiple choice) A. Switching failed B. Load balancing TAU requirements C. Other failures D. Reconfiguration failed Answer: ACD 4.The virtual resource block (VRB) is used to describe the LTE downlink transmission resource allocation mode. What

  3. are the two resource mapping modes supported by the VRB? (Multiple choice) A. Centralized distribution B. Discontinuous allocation C. Separate distribution D. Continuous distribution Answer: AC 5.Under what circumstances may a mobile phone user be assigned a new GUTI? A. Attachment B. Cross MME TA update C. the TA update in MME D. All of the above is correct Answer: D 6.What is the number of bits per subframe for PUCCH format 2b? A. 1

  4. B. 2 C. 20 D. 22 Answer: D 7.How many symbols consists of the next time slot (0.5ms) of the normal CP, and the middle is separated by the front and back of the loop? A. 6 B. 7 C. 12 D. 14 Answer: B 8.The interval between ACK and initial transmission data. How many TTIs is there for FDD LTE? A. 2 B. 4 C. 6

  5. D. 8 Answer: B 9.What are the differences between FDD and TDD in PRACH channel design? (Multiple choice) A. TDD supports short RACH (format4) B. The short RACH time domain resource is on the UpPTS and shares the UpPTS frequency domain resource with Sounding. C. frequency domain occupies 6 RBs, the number of symbols occupied by the time domain is determined by the radius of the supported access D. Because there are few TDD uplink subframes, multiple RACH channels in the same subframe are allowed. Answer: ABD 10.Which of the following PRACH access preambles are available for both FDD and TDD? (Multiple Choice) A. Leading format 2 B. Leading format 1

  6. C. Leading format 3 D. Leading format 4 Answer: ABC

More Related