1 / 17

FDDI (Fiber Distributed Data Interface)

FDDI (Fiber Distributed Data Interface). Standardized by ASI and ITU-T (ITU-T X.3. FDDI (Fiber Distributed Data Interface). Data rate – 100 Mbps Access method – token passing CDDI – copper version. S-frames – synchronous (real time data) A-frame – asynchronous (not real time).

Download Presentation

FDDI (Fiber Distributed Data Interface)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. FDDI (Fiber Distributed Data Interface) Standardized by ASI and ITU-T (ITU-T X.3

  2. FDDI (Fiber Distributed Data Interface) Data rate – 100 Mbps Access method – token passing CDDI – copper version S-frames – synchronous (real time data) A-frame – asynchronous (not real time)

  3. Access Method • TIME REGISTERS • Synchronous allocation (SA) • Target token rotation time (TTRT) • Absolute maximum time (AMT) • Access is limited by time • Priority – real time data • Steps • A station captures the token • Send S-frames first • Any remaining time may then be used to send A-frames

  4. Time Registers Synchronous Allocation (SA) • Length of time allowed for S-frames • Different for each station • Ring initialization Target Token Rotation Time (TTRT) • Average time required for a token to circulate around the ring exactly once • Absolute Maximum Time (AMT) • Twice the TTRT • To avoid monopolizing the network

  5. Timers Token Rotation Timer (TRT) • Runs continuously • Measures the actual time taken by the token to complete a cycle • Incrementing or (decrementing) TRT Token Holding Timer (THT) • Begins running as soon as the token is received • Shows how much time remains for sending asynchronous frames • Decrementing or (incrementing ) THT

  6. Station Procedure • Set the values of timers • THT = TTRT – TRT • TRT = 0 • Sends synchronous data • Sends asynchronous data as long as the value of THT is positive

  7. FDDI Example ASSUMPTIONS: • TTRT = 30 time units • Traveling token from one station to another = 1 time unit • Each station is allowed to send 2 S-frames per turn • Each station has a lot of A-frames to send

  8. Figure 12-22 FDDI Example Round 0 – The token travels around the ring: each station sets its TRT timer to 0

  9. FDDI Example Figure 12-22-continued

  10. FDDI Encoding Figure 12-23 NRZ-I

  11. 4B/5B Encoding None of the five bit patterns start with more than one zero Transforms each 4-bit data into a 5-bit unit that contains no more than two consecutive 0s

  12. 4B/5B Encoding Unused five-bit codes are used for control

  13. FDDI Layers Figure 12-24

  14. Figure 12-25 FDDI Frames Each frame is preceded by 16 idle symbols (1111), a total of 64 bits ED – Full byte in token frame, T control code(s) FS – same to that of token ring SD – J and K control codes FC – Identify the frame type

  15. Figure 12-26 Physical Medium Dependent Layer Dual Ring – secondary ring make s FDDI self-healing

  16. FDDI Ring Failure Figure 12-27

  17. FDDI Nodes Figure 12-28 MIC – Media Interface Connector Three Types of Nodes SAS – Single Attachment Station DAS – Dual Attachment Station DAC – Dual Attachment Concentrator

More Related