1 / 12

SPECIFIC HEAT CAPACITY

SPECIFIC HEAT CAPACITY. At the end of a sunny day at the beach, you often notice that while the sand has become quite hot , the water has stayed cool. SAME amount of HEAT ENERGY. Small TEMPERATURE RISE. Large TEMPERATURE RISE. WATER. SAND.

wendy-velez
Download Presentation

SPECIFIC HEAT CAPACITY

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. SPECIFIC HEAT CAPACITY At the end of a sunny day at the beach, you often notice that while the sand has become quite hot, the water has stayed cool.

  2. SAME amount of HEAT ENERGY Small TEMPERATURE RISE Large TEMPERATURE RISE WATER SAND Putting the SAME AMOUNT OF HEAT into some materials gives a BIGGER TEMPERATURE RISE than in other materials

  3. Comparing water and cooking oil 30° rise 60° rise 1kg of water 1kg of cooking oil 20°C 50°C 80°C 20°C ….heating Identical rings turned on for 1 minute The water heats up less than the oil. The SAME AMOUNT OF HEAT produces HALF the TEMPERATURE RISE in the water as in the oil

  4. Comparing water and cooking oil 2 60° rise 60° rise What would we need to do to make the SAME TEMPERATURE RISE in the water as in the oil? 1kg of water 1kg of cooking oil 20°C 80°C 20°C 80°C Heat for 2 minutes Heat for 1 minute To make the SAME TEMP RISE we need to put TWICE AS MUCH HEAT into the water as the oil

  5. To make the SAME TEMP RISE we need to put TWICE AS MUCH HEAT into the water as the oil This means water has twice the CAPACITY to absorb and store heat energy as oil. Materials vary quite widely as to the amount of heat they can absorb for the same temperature rise. There are no simple patterns in this although metals tend to have low capacities. copper water Silica (rock) cooking oil

  6. SAME AMOUNT OF HEAT PUT IN HEAT FOR 16 mins 8 mins 4 mins 2 mins We only get ¼ the TEMP RISE with water than with rock for the SAME AMOUNT of HEAT 20°C rise 40°C rise 5°C rise 10°C rise silica (rock) copper water cooking oil Two ways to look at heat capacity… We need to put in 4x the AMOUNT OF HEAT into water than rock to get the SAME TEMP RISE 10°C rise 10°C rise 10°C rise 10°C rise copper silica (rock) water cooking oil

  7. So we say water has a HIGHER HEAT CAPACITY than rock See those results again..

  8. How to MEASURE HEAT CAPACITY? 1°C rise To compare the heat capacity of materials, we need to measure: How many JOULES of heat energy are needed to make each degree temperature rise

  9. mass (kg)? volume (m3)? particles (moles)? To make a FAIR comparison between materials we also need to compare the same amount of….. All of these are used to compare heat capacities, but for GCSE we use SPECIFIC Heat Capacity which compares the same amount of MASS.

  10. 1°C rise SPECIFIC HEAT CAPACITY (c) is…. How many JOULES of heat energy are needed to raise the temperature of: each kg by each °C 1 kg How many Joules ?

  11. Working it out… E c = m θ Specific heat capacity = Number of Joules of HEAT (E) Number of kg of MASS (m) Number of °Cof TEMPERATURE CHANGE (θ) E c = m θ Given in the exam as: Heat = mass x SHC x temp change

More Related