1 / 13

Measuring tree volume

Measuring tree volume. How much wood is in that tree? How much is that tree worth?. Tools Needed. Clinometer – used to measure the height of the tree Tape measure – used to measure the diameter and distance from the tree Calculator – used to calculate the board footage in a tree

walterpage
Download Presentation

Measuring tree volume

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Measuring tree volume How much wood is in that tree? How much is that tree worth?

  2. Tools Needed • Clinometer – used to measure the height of the tree • Tape measure – used to measure the diameter and distance from the tree • Calculator – used to calculate the board footage in a tree • Log Sheet – used to log in all the measurments we take in the field

  3. Using the Clinometer • A Clinometer is a tool used to measure angle and will be used to figure out the height of the tree. It has degrees to measure the angle

  4. Tape Measure • When measuring the diameter, measure in total inches and then divide by 12 to give your dimension in feet. 37 inches in diameter will be = 3.08 ft 37/12 or 3.08 ft

  5. Calculator • A simple calculator will work fine for this exercise. We will be using a table of information for you to make simple calculations.

  6. Log Sheet • The only way to keep track of the trees we measure is to log all the information. • Board Footage Data Sheet • Tree # _____Tree species: ___________________ • Height _____ feet • Diameter _____ inches • Diameter in feet / 2 = ________ radius in inches / 12 = _____ feet • Area of tree cross-section = above number squared x 3.14 =______ sq.ft. • Volume of tree in cubic feet = above number x tree height / 4 = ______ • Volume of tree in board feet = above number x 12 = _________ • What the tree is worth in material= above number x BF cost ____________

  7. Measuring the Height of the Tree By using the formula ab x Tangent A = X, we can determine the height of the tree, where: ab = the distance from the tree A = the angle of elevation X = the height of the tree Tangents are determined by using tangent charts (See the chart )

  8. Tree height samples • Example 1: • if A = 35 feet, and B = 34°, then the tangent of B = 0.6745 • 35 x 0.6745 = X • 23.61 = X (the height is approximately 24 feet, or 7.3 m)

  9. Tree height samples • Example 2: • if a = 35 feet and b = 60°, then the tangent of A = 1.7321 • 35 x 1.7321 = X • 60.6235 = X (the height is approximately 61 feet, or 18.6 m)

  10. Measuring the tree • To measure volume of the tree, 5’ above the ground measure the diameter of tree. • To get the volume • Diameter is equal to Circumference / 3.14 Example : Circumference = 28” that is 28/12 = 2.33 feet 2.33’/3.14 = .75’

  11. Getting the volume • After we get the diameter we need to find the area of the tree • Diameter/2 to get your radius • Area = 3.14 x r2 • Our area in the previous example was .75 • .75/2 = .375 • .3752 x 3.14 = .44

  12. Almost there!!Cubic Area of the tree • Cubic Feet = Area (ft) X Height (ft) / 4 • We found the area in the previous example = .44 Now we multiply .44 x 61’ and divide by 4 WHY divide by 4? It accounts for the taper of the tree Our total cubic feet in our tree is 6.71

  13. Final total • 1 cubic foot has 12 board feet of material in it. • That makes our tree have 6.71 x 12 = • 81 board feet of material in it • It is an oak $3.25 per BF • Our tree is worth • 3.25 x 81 = $263.25

More Related