1 / 33

ERT 423 PROJEK TAHUN AKHIR TAKLIMAT FORMAT PENULISAN TESIS UNTUK PEMBENTANGAN PROJEK TAHUN AKJIR

ERT 423 PROJEK TAHUN AKHIR TAKLIMAT FORMAT PENULISAN TESIS UNTUK PEMBENTANGAN PROJEK TAHUN AKJIR. PUAN ROZAINI ABDULLAH KOORDINATOR ERT 423 PROJEK TAHUN AKHIR PROGRAM KEJURUTERAAN BIOPROSES. 1. TYPING. 2. SUBDIVISON. CHAPTER 1 INTRODUCTION 1.1 Research Background 1.2 Problems Statement

Download Presentation

ERT 423 PROJEK TAHUN AKHIR TAKLIMAT FORMAT PENULISAN TESIS UNTUK PEMBENTANGAN PROJEK TAHUN AKJIR

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. ERT 423 PROJEK TAHUN AKHIRTAKLIMAT FORMAT PENULISAN TESIS UNTUK PEMBENTANGAN PROJEK TAHUN AKJIR PUAN ROZAINI ABDULLAH KOORDINATOR ERT 423 PROJEK TAHUN AKHIR PROGRAM KEJURUTERAAN BIOPROSES

  2. 1. TYPING

  3. 2. SUBDIVISON CHAPTER 1 INTRODUCTION 1.1 Research Background 1.2 Problems Statement 1.3 Scope of the study 1.4 Objectives 3-5 pages

  4. CHAPTER 2 LITERATURE REVIEW Example 1: CHAPTER 2 LITERATURE REVIEW 2.1Biolubricant 2.1.1 Type of Biolubricant 2.1.2 Source of Biolubricant 2.1.2 Physico-chemical Properties of Biolubricant 2.2 Jatrophacurcas 2.2.1 Source of Jatrophacurcas 2.2.1.1 Jatrophacurcasfrom Malaysia 2.2.1.2 Jatrophacurcasfrom Indonesia 2.3 Oil Blend 2.3.1 Application of Oil Blend 2.3.1 Advantages Oil Blend As Biolubricant 2.4 Design of Experiment (DOE) 2.5 Kinetic Study of Oil Blend

  5. CHAPTER 3 METHODOLOGY Example 2: CHAPTER 3 METHODOLOGY 3.1 Materials 3.2 Oil Extraction 3.3 Determination of Physico-chemical Properties Of Oil Extraction 3.3.1 Total Fat Content 3.3.2 Acid Value 3.3.3 Peroxide value 3.4 Determination of Physico-chemical Properties Of Oil Blend 3.4.1 Total Fat Content 3.4.2 Acid Value 3.4.3 Peroxide value 3.5 Oil Blending 3.6 Screening of Oil Blend (JCO+Safflower Oil) 3.7 Optimization of Oil Blend (JCO_Safflower Oil)

  6. CHAPTER 4 RESULTS AND DISCUSSIONS Example 3: CHAPTER 4 RESULTS AND DISCUSSIONS 4.1 Comparison of Physico-chemical Properties-Before and After Blending 4.2 Fatty Acid Composition 4.3 Functional Group Identification – FTIR 4.4 Screening of Effect Parameters – Oil Blending 4.5 Optimization of Oil Blending 4.6 Characterization of Oil Blend as Biolubricant Application

  7. CHAPTER 5 CONCLUSION CHAPTER 5 CONCLUSION 5.1 Summary 5.2 Recommendations for Future Projects 5.3 Commercialization Potential 3- 4 Pages

  8. 3. TABLES

  9. Example 4: Non-numbering Style Table 3.1: Recommended sample weights of oxirane oxygen determination. Source: Swern et al. (2010). 12 point Times New Romans (single spacing for long tables, long equation, notes, footnotes & reference enteries.)

  10. Example 5: Numbering Style Table 3.1: Recommended sample weights of oxirane oxygen determination [4]. You may choose either non-numbering or numbering style in your thesis writing

  11. Example 6: If your table exceed more than 1 page, the caption for the continues table only type as below: Table 3.1: Continue Source: Swern et al. (2010). Any table/figure/etc that you mention in the thesis must be appear/explain in the text of any paragraph of any chapter. The position of the table either before or after the explanation.

  12. 4. FIGURES

  13. Example 7: Re-type by using insert text in MSWords. Border: Black 1 – 1.5 weight Figure 1.1: Production of Jatropha Seed Oil Source: Swern et al. (2010).

  14. Example 8: Border: Black 1 – 1.5 weight Figure 1.1: Production of Jatropha Seed Oil [4].

  15. Example 9: If this figure not clear, you need to re-draw if it is necessary.

  16. Example 10: Plate 1.1: Milk clotting.

  17. Example 11: Figure 1.2: Transesterification reaction. Source: Swern et al. (2010). If the figure from internet/journal/etc not clear please used chemdraw software to sketch it. Figure 1.2: Transesterification reaction. Source: Swern et al. (2010).

  18. http://www.cambridgesoft.com/Ensemble_for_Chemistry/ChemDraw/http://www.cambridgesoft.com/Ensemble_for_Chemistry/ChemDraw/ http://scistore.cambridgesoft.com/ScistoreSoftwareDisplay.aspx?Trial=Trial/ http://www.acdlabs.com/resources/freeware/chemsketch/

  19. 4. Equations The procedure for determination of peroxide value was started with 2 g of sample was weighted into the 250 mL flask. The corrected ratio 3:2 of acetic acid –chloroform was added into the flask. Then, 0.5 mL of saturated potassium iodide was added and swirling the solution in 1 minute before adding of 30 mL distilled water. After that, 0.01 N sodium thiosulphate solutions were titrating gradually and vigorously shaking. The titration step was finished when a blue colour just disappears. Besides that, for sample contain high peroxide value, 0.01 N sodium thiosulphate solution was titrated until yellow iodine colour has most disappeared before starch indicator was added to continues titration until colour just almost disappears. Finally, blank test was carried out using the same procedure. Finally the peroxide value was calculated using Equation 3.10 (Salimon et al. 2006). Peroxide value = (Vs-Vb ) N x 1000 (3.10) W Where, Vs=Volume in milliliters, of the sodium thiosulphate solution of normality N, used for determination Vb= Volume in milliliters of the sodium thiosulphate solution used for the blank test W=Weight in grams of the test portion N is the normality of the sodium thiosulphate solution

  20. 4. References-Journal: 1 Author Author Name. Year. Article Title. Name of Journal. Edition(month or no. publishing). Page number. Example 12: Cermak, V. (1975). Combined Heat Flow and Heat Measurements in the Bohemian Generation Massif, Journal of Geothermics, 4(3), pp. 19-26. In thesis writing Non-numbering system: The scope of peroxide value test is suitable for all normal fats and oils. In application, peroxide value can be used as an indicator to measure early oxidation process products (Salimon, 2006). OR According to Salimon (2006) the scope of peroxide value test is suitable for all normal fats and oils. In application, peroxide value can be used as an indicator to measure early oxidation process products.

  21. 4. References-Journal: 1 Author Author Name. Year. Article Title. Name of Journal. Edition(month or no. publishing). Page number. Example 13: One Author Cermak, V. (1975). Combined Heat Flow and Heat Measurements in the Bohemian Generation Massif, Journal of Geothermics, 4(3), pp. 19-26. In thesis writing Numbering system: The scope of peroxide value test is suitable for all normal fats and oils. In application, peroxide value can be used as an indicator to measure early oxidation process products [5]. According to Salimon [5], the scope of peroxide value test is suitable for all normal fats and oils. In application, peroxide value can be used as an indicator to measure early oxidation process products.

  22. 4. References-Journal: 2 Authors Example 14: Cermak, C.S. and Isbell, T.A. (2009), Synthesis and physical properties of mono-estolides with varying chain lenghts, Industrial Crops and Products, 29, pp. 205-213. In thesis writing Non-numbering system: Synthesis of long chain capped estolide was conducted without solvent in 1000 mL three neck flask (Cermak and Isbell, 2009). OR Cermak and Isbell (2009) stated that, synthesis of long chain capped estolide was conducted without solvent in 1000 mL three neck flask.

  23. 4. References-Journal: 2 Authors Example 15: Cermak, C.S. and Isbell, T.A. (2009), Synthesis and physical properties of mono-estolides with varying chain lenghts, Industrial Crops and Products, 29, pp. 205-213. In thesis writing Numbering system: Synthesis of long chain capped estolide was conducted without solvent in 1000 mL three neck flask [5]. OR Cermak and Isbell [5] stated that, synthesis of long chain capped estolide was conducted without solvent in 1000 mL three neck flask.

  24. 4. References-Journal: More 2 Authors Example 16: Isbell, T.A., Lowery, B.A., DeKeyser, S.S., Winchell, M.L. and Cermak, S.C. (2006),Physical properties of triglyeceride estolides from lesquerella and castor oils, Industrial Crops and Products, 23(4), pp. 255-263. In thesis writing Non-numbering system: Lesquerella and castor triglyceride estolides improved the physical properties (Isbell et al., 2009). OR Isbell et al. (2009) conclude that, Lesquerella and castor triglyceride estolides improved the physical properties

  25. 4. References-Journal: More 2 Authors Example 17: Isbell, T.A., Lowery, B.A., DeKeyser, S.S., Winchell, M.L. and Cermak, S.C. (2006),Physical properties of triglyeceride estolides from lesquerella and castor oils, Industrial Crops and Products, 23(4), pp. 255-263. In thesis writing Non-numbering system: Lesquerella and castor triglyceride estolides improved the physical properties (Isbell et al., 2009). OR Isbell et al. (2009) conclude that, Lesquerella and castor triglyceride estolides improved the physical properties

  26. 4. References-Journal: More 2 Authors Example 18: Isbell, T.A., Lowery, B.A., DeKeyser, S.S., Winchell, M.L. and Cermak, S.C. (2006),Physical properties of triglyeceride estolides from lesquerella and castor oils, Industrial Crops and Products, 23(4), pp. 255-263. In thesis writing Numbering system: Lesquerella and castor triglyceride estolides improved the physical properties [5] OR Isbell et al. [5] conclude that, Lesquerella and castor triglyceride estolides improved the physical properties

  27. 4. References: Conference or Proceeding Author(s), (year). Article Title, Name of conference, Location of conference, page number. Example 19: Kua Lay Chim, Rozaini Abdullah, Zarina Zakaria & Huzairy Hassan, (2012). Studies Of Potential Plant Parts Of Kesinai (Streblus Asper) For Protease Production, Proceeding Malaysian International Conference on Trends in Bioprocess Engineering, Kedah, Langkawi, pp 105-115.

  28. 4. References: Books Author(s), (year). Title of book in italic, Edition number, Name of publisher, publication. Example 20: Sze, S.M. (2012). Organic Chemistry, 6th Edition, John Wiley & Sons, United Kingdom.

  29. 4. References: Thesis Author(s), (year). Title thesis in italic, Type of publication, Name of institution, country. Example 21: Sze, S.M. (2012). The production of glucose from paddy straw, MSc. Thesis, Universiti Malaysia Perlis, Malaysia.

  30. 4. References List: Non-numbering system Swern, D., Thomas, W.F., Geraldine, N.B., and John T.S. (1947). Determination of oxirane oxygen, Eastern Regional Research laboratory, Philadelphia 18. Tan, S.G., and Chow, W.S. (2010). Biobasedepoxidized vegetable oils and its greener epoxy blends : a review, Polymer-Plastic Technology and Engineering, 49, pp. 1581-1590. Wagner, H., Luther, R., and Theo, M. ( 2001). Lubricant base fluids based on renewableraw materials their catalytic manufacture and modification, Applied Catalysis A. 221, pp. 429-442.

  31. 4. References List: Numbering system [1] Swern, D., Thomas, W.F., Geraldine, N.B., and John T.S. (1947). Determination of oxirane oxygen, Eastern Regional Research laboratory, Philadelphia 18. [2] Wagner, H., Luther, R., and Theo, M. ( 2001). Lubricant base fluids based on renewableraw materials their catalytic manufacture and modification, Applied Catalysis A. 221, pp. 429-442. [3] Tan, S.G., and Chow, W.S. (2010). Biobasedepoxidized vegetable oils and its greener epoxy blends : a review, Polymer-Plastic Technology and Engineering, 49, pp. 1581-1590.

  32. http://www.mendeley.com/download-mendeley-desktop/ USED THIS LINK TO HELP YOU TO ORGANIZE ALL YOUR REFERENCES.

  33. THANK YOU.

More Related